Skip to menu Skip to content Skip to footer

2023

Journal Article

Fabrication and properties of biodegradable akermanite-reinforced Fe35Mn alloys for temporary orthopedic implant applications

Zhang, Meili, Yang, Nan, Dehghan-Manshadi, Ali, Venezuela, Jeffrey, Bermingham, Michael J. and Dargusch, Matthew S. (2023). Fabrication and properties of biodegradable akermanite-reinforced Fe35Mn alloys for temporary orthopedic implant applications. ACS Biomaterials Science and Engineering, 9 (3), 1261-1273. doi: 10.1021/acsbiomaterials.2c01228

Fabrication and properties of biodegradable akermanite-reinforced Fe35Mn alloys for temporary orthopedic implant applications

2023

Journal Article

Evolution of degradation mechanism and fixation strength of biodegradable Zn–Cu wire as sternum closure suture: an in vitro study

Yang, Nan, Venezuela, Jeffrey, Zhang, Jingqi, Wang, Anguo, Almathami, Sharifah and Dargusch, Matthew (2023). Evolution of degradation mechanism and fixation strength of biodegradable Zn–Cu wire as sternum closure suture: an in vitro study. Journal of the Mechanical Behavior of Biomedical Materials, 138 105658, 1-11. doi: 10.1016/j.jmbbm.2023.105658

Evolution of degradation mechanism and fixation strength of biodegradable Zn–Cu wire as sternum closure suture: an in vitro study

2023

Journal Article

Feasibility of the use of gas phase inhibition of hydrogen embrittlement in gas transmission pipelines carrying hydrogen: a review

Atrens, Andrej, Gray, Evan, Venezuela, Jeffrey, Hoschke, Joshua and Roethig, Maximilian (2023). Feasibility of the use of gas phase inhibition of hydrogen embrittlement in gas transmission pipelines carrying hydrogen: a review. JOM, 75 (1), 232-238. doi: 10.1007/s11837-022-05559-8

Feasibility of the use of gas phase inhibition of hydrogen embrittlement in gas transmission pipelines carrying hydrogen: a review

2023

Journal Article

Enhancing the corrodibility of biodegradable iron and zinc using poly(lactic) acid (PLA) coating for temporary medical implant applications

Wang, Anguo, Venezuela, Jeffrey and Dargusch, Matthew Simon (2023). Enhancing the corrodibility of biodegradable iron and zinc using poly(lactic) acid (PLA) coating for temporary medical implant applications. Progress in Organic Coatings, 174 107301, 1-18. doi: 10.1016/j.porgcoat.2022.107301

Enhancing the corrodibility of biodegradable iron and zinc using poly(lactic) acid (PLA) coating for temporary medical implant applications

2022

Journal Article

Microstructure refinement in biodegradable Zn-Cu-Ca alloy for enhanced mechanical properties, degradation homogeneity, and strength retention in simulated physiological condition

Yang, Nan, Balasubramani, Nagasivamuni, Venezuela, Jeffrey, Bielefeldt-Ohmann, Helle, Allavena, Rachel, Almathami, Sharifah and Dargusch, Matthew (2022). Microstructure refinement in biodegradable Zn-Cu-Ca alloy for enhanced mechanical properties, degradation homogeneity, and strength retention in simulated physiological condition. Journal of Materials Science and Technology, 125, 1-14. doi: 10.1016/j.jmst.2022.03.006

Microstructure refinement in biodegradable Zn-Cu-Ca alloy for enhanced mechanical properties, degradation homogeneity, and strength retention in simulated physiological condition

2022

Journal Article

The influence of phosphorus on the temper embrittlement and hydrogen embrittlement of some dual-phase steels

Dong, Futao, Venezuela, Jeffrey, Li, Huixing, Shi, Zhiming, Zhou, Qingjun, Chen, Liansheng, Chen, Jun, Du, Linxiu and Atrens, Andrej (2022). The influence of phosphorus on the temper embrittlement and hydrogen embrittlement of some dual-phase steels. Materials Science and Engineering: A, 854 143379, 143379. doi: 10.1016/j.msea.2022.143379

The influence of phosphorus on the temper embrittlement and hydrogen embrittlement of some dual-phase steels

2022

Journal Article

An overview and critical assessment of the mechanisms of microstructural refinement during ultrasonic solidification of metals

Balasubramani, Nagasivamuni, Venezuela, Jeffrey, Yang, Nan, Wang, Gui, StJohn, David and Dargusch, Matthew (2022). An overview and critical assessment of the mechanisms of microstructural refinement during ultrasonic solidification of metals. Ultrasonics Sonochemistry, 89 106151, 1-16. doi: 10.1016/j.ultsonch.2022.106151

An overview and critical assessment of the mechanisms of microstructural refinement during ultrasonic solidification of metals

2022

Journal Article

Effect of cold deformation on the hydrogen permeation in a dual-phase advanced high-strength steel

Li, Huixing, Venezuela, Jeffrey, Zhou, Qingjun, Shi, Zhiming, Dong, Futao, Yan, Ming, Knibbe, Ruth, Zhang, Mingxing and Atrens, Andrej (2022). Effect of cold deformation on the hydrogen permeation in a dual-phase advanced high-strength steel. Electrochimica Acta, 424 140619, 140619. doi: 10.1016/j.electacta.2022.140619

Effect of cold deformation on the hydrogen permeation in a dual-phase advanced high-strength steel

2022

Journal Article

Influence of hydrogen on the S–N fatigue of DP1180 advanced high-strength steel

Li, Huixing, Dong, Futao, Zhou, Qingjun, Shi, Zhiming, Venezuela, Jeffrey, Yan, Ming, Knibbe, Ruth, Zhang, Mingxing and Atrens, Andrej (2022). Influence of hydrogen on the S–N fatigue of DP1180 advanced high-strength steel. Corrosion Science, 205 110465, 110465. doi: 10.1016/j.corsci.2022.110465

Influence of hydrogen on the S–N fatigue of DP1180 advanced high-strength steel

2022

Journal Article

Additively manufactured Fe-35Mn-1Ag lattice structures for biomedical applications

Dehghan-Manshadi, A., Venezuela, J., Demir, A. G., Ye, Q. and Dargusch, M. S. (2022). Additively manufactured Fe-35Mn-1Ag lattice structures for biomedical applications. Journal of Manufacturing Processes, 80, 642-650. doi: 10.1016/j.jmapro.2022.06.010

Additively manufactured Fe-35Mn-1Ag lattice structures for biomedical applications

2022

Journal Article

In vivo performance of a rare earth free Mg–Zn–Ca alloy manufactured using twin roll casting for potential applications in the cranial and maxillofacial fixation devices

Dargusch, Matthew S., Balasubramani, Nagasivamuni, Yang, Nan, Johnston, Sean, Ali, Yahia, Wang, Gui, Venezuela, Jeffrey, Carluccio, Jiwon, Lau, Cora, Allavena, Rachel, Liang, Daniel, Mardon, Karine and Ye, Qingsong (2022). In vivo performance of a rare earth free Mg–Zn–Ca alloy manufactured using twin roll casting for potential applications in the cranial and maxillofacial fixation devices. Bioactive Materials, 12, 85-96. doi: 10.1016/j.bioactmat.2021.10.026

In vivo performance of a rare earth free Mg–Zn–Ca alloy manufactured using twin roll casting for potential applications in the cranial and maxillofacial fixation devices

2022

Journal Article

Effect of shearing prestrain on the hydrogen embrittlement of 1180 MPa grade martensitic advanced high-strength steel

Li, Huixing, Venezuela, Jeffrey, Zhou, Qingjun, Shi, Zhiming, Yan, Ming, Knibbe, Ruth, Zhang, Mingxing, Dong, Futao and Atrens, Andrej (2022). Effect of shearing prestrain on the hydrogen embrittlement of 1180 MPa grade martensitic advanced high-strength steel. Corrosion Science, 199 110170, 110170. doi: 10.1016/j.corsci.2022.110170

Effect of shearing prestrain on the hydrogen embrittlement of 1180 MPa grade martensitic advanced high-strength steel

2022

Journal Article

The influence of the protein bovine serum albumin (BSA) on the corrosion of Mg, Zn, and Fe in Zahrina's simulated interstitial fluid

Mardina, Zahrina, Venezuela, Jeffrey, Dargusch, Matthew S., Shi, Zhiming and Atrens, Andrej (2022). The influence of the protein bovine serum albumin (BSA) on the corrosion of Mg, Zn, and Fe in Zahrina's simulated interstitial fluid. Corrosion Science, 199 110160, 1-19. doi: 10.1016/j.corsci.2022.110160

The influence of the protein bovine serum albumin (BSA) on the corrosion of Mg, Zn, and Fe in Zahrina's simulated interstitial fluid

2022

Journal Article

Design, mechanical and degradation requirements of biodegradable metal mesh for pelvic floor reconstruction

Mardina, Zahrina, Venezuela, Jeffrey, Maher, Christopher, Shi, Zhiming, Dargusch, Matthew S. and Atrens, Andrej (2022). Design, mechanical and degradation requirements of biodegradable metal mesh for pelvic floor reconstruction. Biomaterials Science, 10 (13), 3371-3392. doi: 10.1039/d2bm00179a

Design, mechanical and degradation requirements of biodegradable metal mesh for pelvic floor reconstruction

2021

Journal Article

Ultrasonic treatment for the refinement of brittle CaZn13 phases in a biomedical Zn-Cu-Ca alloy

Balasubramani, Nagasivamuni, Yang, Nan, Venezuela, Jeffrey and Dargusch, Matthew (2021). Ultrasonic treatment for the refinement of brittle CaZn13 phases in a biomedical Zn-Cu-Ca alloy. Materials Letters, 305 130754, 130754. doi: 10.1016/j.matlet.2021.130754

Ultrasonic treatment for the refinement of brittle CaZn13 phases in a biomedical Zn-Cu-Ca alloy

2021

Journal Article

Biodegradable shape memory alloys: progress and prospects

Wang, Yuan, Venezuela, Jeffrey and Dargusch, Matthew (2021). Biodegradable shape memory alloys: progress and prospects. Biomaterials, 279 121215, 1-28. doi: 10.1016/j.biomaterials.2021.121215

Biodegradable shape memory alloys: progress and prospects

2021

Journal Article

Zinc-nutrient element based alloys for absorbable wound closure devices fabrication: current status, challenges, and future prospects

Yang, Nan, Venezuela, Jeffrey, Almathami, Sharifah and Dargusch, Matthew (2021). Zinc-nutrient element based alloys for absorbable wound closure devices fabrication: current status, challenges, and future prospects. Biomaterials, 280 121301, 121301. doi: 10.1016/j.biomaterials.2021.121301

Zinc-nutrient element based alloys for absorbable wound closure devices fabrication: current status, challenges, and future prospects

2021

Journal Article

Hydrogen-induced fast fracture in notched 1500 and 1700 MPa class automotive martensitic advanced high-strength steel

Venezuela, Jeffrey, Hill, Timothy, Zhou, Qingjun, Li, Huixing, Shi, Zhiming, Dong, Futao, Knibbe, Ruth, Zhang, Mingxing, Dargusch, Matthew S. and Atrens, Andrej (2021). Hydrogen-induced fast fracture in notched 1500 and 1700 MPa class automotive martensitic advanced high-strength steel. Corrosion Science, 188 109550, 1-17. doi: 10.1016/j.corsci.2021.109550

Hydrogen-induced fast fracture in notched 1500 and 1700 MPa class automotive martensitic advanced high-strength steel

2021

Journal Article

Hydrogen fracture maps for sheared-edge-controlled hydrogen-delayed fracture of 1180 MPa advanced high-strength steels

Li, Huixing, Venezuela, Jeffrey, Qian, Zhen, Zhou, Qingjun, Shi, Zhiming, Yan, Ming, Knibbe, Ruth, Zhang, Mingxing, Dong, Futao and Atrens, Andrej (2021). Hydrogen fracture maps for sheared-edge-controlled hydrogen-delayed fracture of 1180 MPa advanced high-strength steels. Corrosion Science, 184 109360, 109360. doi: 10.1016/j.corsci.2021.109360

Hydrogen fracture maps for sheared-edge-controlled hydrogen-delayed fracture of 1180 MPa advanced high-strength steels

2021

Journal Article

The influence of Ca and Cu additions on the microstructure, mechanical and degradation properties of Zn–Ca–Cu alloys for absorbable wound closure device applications

Yang, Nan, Balasubramani, Nagasivamuni, Venezuela, Jeffrey, Almathami, Sharifah, Wen, Cuie and Dargusch, Matthew (2021). The influence of Ca and Cu additions on the microstructure, mechanical and degradation properties of Zn–Ca–Cu alloys for absorbable wound closure device applications. Bioactive Materials, 6 (5), 1436-1451. doi: 10.1016/j.bioactmat.2020.10.015

The influence of Ca and Cu additions on the microstructure, mechanical and degradation properties of Zn–Ca–Cu alloys for absorbable wound closure device applications