|
2012 Journal Article Corrosion behaviour of a nominally high purity Mg ingot produced by permanent mould direct chill castingQiao, Zhixia, Shi, Zhiming, Hort, Norbert, Abidin, Nor Ishida Zainal and Atrens, Andrej (2012). Corrosion behaviour of a nominally high purity Mg ingot produced by permanent mould direct chill casting. Corrosion Science, 61, 185-207. doi: 10.1016/j.corsci.2012.04.030 |
|
2012 Journal Article Role of second phase cementite and martensite particles on strength and strain hardening in a plain C-Mn steelZhao, Ming-Chun, Huang, Xiao-Fang and Atrens, Andrej (2012). Role of second phase cementite and martensite particles on strength and strain hardening in a plain C-Mn steel. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 549, 222-227. doi: 10.1016/j.msea.2012.04.040 |
|
2012 Journal Article Galvanostatic anodic polarisation curves and galvanic corrosion of high purity Mg in 3.5% NaCl saturated with Mg(OH)(2)Shi, Zhiming, Jia, Jimmy Xueshan and Atrens, Andrej (2012). Galvanostatic anodic polarisation curves and galvanic corrosion of high purity Mg in 3.5% NaCl saturated with Mg(OH)(2). Corrosion Science, 60, 296-308. doi: 10.1016/j.corsci.2011.12.002 |
|
2012 Journal Article Surface damage on new AS60 rail caused by wheel slipPal, Sarvesh, Daniel, William J.T., Valente, Carlos H.G., Wilson, Andrew and Atrens, Andrej (2012). Surface damage on new AS60 rail caused by wheel slip. Engineering Failure Analysis, 22, 152-165. doi: 10.1016/j.engfailanal.2012.01.002 |
|
2012 Journal Article Plug-in specimens for measurement of the corrosion rate of Mg alloysShi, Zhiming, Prasad, Arvind and Atrens, Andrej (2012). Plug-in specimens for measurement of the corrosion rate of Mg alloys. JOM, 64 (6), 657-663. doi: 10.1007/s11837-012-0335-z |
|
2012 Journal Article Flammability of Mg-X binary alloysPrasad, Arvind, Shi, Zhiming and Atrens, Andrej (2012). Flammability of Mg-X binary alloys. Advanced Engineering Materials, 14 (9), 772-784. doi: 10.1002/adem.201200124 |
|
2012 Journal Article Galvanostatic anodic polarization curves and galvanic corrosion of AZ31B in 0.01 M Na2SO4 saturated with Mg(OH)(2)Shi, Zhiming, Jia, Jimmy Xueshan and Atrens, Andrej (2012). Galvanostatic anodic polarization curves and galvanic corrosion of AZ31B in 0.01 M Na2SO4 saturated with Mg(OH)(2). Advanced Engineering Materials, 14 (5), 324-334. doi: 10.1002/adem.201100257 |
|
2012 Journal Article Production of high purity magnesium alloys by melt purification with ZrPrasad, Arvind, Uggowitzer, Peter J., Shi, Zhiming and Atrens, Andrej (2012). Production of high purity magnesium alloys by melt purification with Zr. Advanced Engineering Materials, 14 (7), 477-490. doi: 10.1002/adem.201200054 |
|
2012 Journal Article Influence of Al and Y on the ignition and flammability of Mg alloysPrasad, Arvind, Shi, Zhiming and Atrens, Andrej (2012). Influence of Al and Y on the ignition and flammability of Mg alloys. Corrosion Science, 55, 153-163. doi: 10.1016/j.corsci.2011.10.014 |
|
2012 Journal Article The ignition temperature of Mg alloys WE43, AZ31 and AZ91Liu, Ming, Shih, Donald S., Parish, Catherine and Atrens, Andrej (2012). The ignition temperature of Mg alloys WE43, AZ31 and AZ91. Corrosion Science, 54 (1), 139-142. doi: 10.1016/j.corsci.2011.09.004 |
|
2011 Journal Article Summary of the panel discussions at the 2nd Symposium on Biodegradable Metals, Maratea, Italy, 2010Staiger, M. P., Feyerabend, F., Willumeit, R., Sfeir, C. S., Zheng, Y. F., Virtanen, S., Mueller, W. D., Atrens, A., Peuster, M., Kumta, P. N., Mantovani, D. and Witte, F. (2011). Summary of the panel discussions at the 2nd Symposium on Biodegradable Metals, Maratea, Italy, 2010. Materials Science and Engineering B-Advanced Functional Solid-State Materials, 176 (20), 1596-1599. doi: 10.1016/j.mseb.2011.09.032 |
|
2011 Journal Article Corrosion of high purity Mg, Mg2Zn0.2Mn, ZE41 and AZ91 in Hank’s solution at 37 °CZainal Abidin, Nor Ishida, Atrens, Aleks D., Martin, Darren and Atrens, Andrej (2011). Corrosion of high purity Mg, Mg2Zn0.2Mn, ZE41 and AZ91 in Hank’s solution at 37 °C. Corrosion Science, 53 (11), 3542-3556. doi: 10.1016/j.corsci.2011.06.030 |
|
2011 Journal Article Microstructure and Properties of Cu-Cr-Ag in-situ CompositesLiu, Keming, Lu, Deping, Zhou, Haitao, Atrens, A., Zou, Jin and Yang, Yanling (2011). Microstructure and Properties of Cu-Cr-Ag in-situ Composites. Xiyou Jinshu Cailiao Yu Gongcheng, 40 (11), 1931-1935. |
|
2011 Journal Article Strength and toughness tradeoffs for an ultrafine-grain size ferrite/cementite steel produced by warm-rolling and annealingZhao, Ming-Chun, Huang, Xiao-Fang, Li, Jing-Li, Zeng, Tian-Yi, Zhao, Ying-Chao and Atrens, Andrej (2011). Strength and toughness tradeoffs for an ultrafine-grain size ferrite/cementite steel produced by warm-rolling and annealing. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 528 (28), 8157-8168. doi: 10.1016/j.msea.2011.07.067 |
|
2011 Journal Article The ductile to brittle transition for C-Mn steel with an ultrafine grain ferrite/cementite microstructureZhao, Ming-Chun, Li, Jing-Li, Zeng, Tian-Yi, Xiaofang,, Huang, Zhao, Ying-Chao and Atrens, Andrej (2011). The ductile to brittle transition for C-Mn steel with an ultrafine grain ferrite/cementite microstructure. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 528 (24), 7228-7237. doi: 10.1016/j.msea.2011.06.005 |
|
2011 Journal Article Influence of the applied stress rate on the stress corrosion cracking of 4340 and 3.5NiCrMoV steels under conditions of cathodic hydrogen chargingRamamurthy, S., Lau, W. M. L. and Atrens, A. (2011). Influence of the applied stress rate on the stress corrosion cracking of 4340 and 3.5NiCrMoV steels under conditions of cathodic hydrogen charging. Corrosion Science, 53 (7), 2419-2429. doi: 10.1016/j.corsci.2011.03.028 |
|
2011 Journal Article Identification of the effective grain size responsible for the ductile to brittle transition temperature for steel with an ultrafine grain size ferrite/cementite microstructure with a bimodal ferrite grain size distributionZhao, Ming-Chun, Zeng, Tian-Yi, Li, Jing-Li, Huang, Xiaofang, Zhao, Ying-Chao and Atrens, Andrej (2011). Identification of the effective grain size responsible for the ductile to brittle transition temperature for steel with an ultrafine grain size ferrite/cementite microstructure with a bimodal ferrite grain size distribution. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 528 (12), 4217-4221. doi: 10.1016/j.msea.2011.02.027 |
|
2011 Journal Article Corrosion of high purity Mg, AZ91, ZE41 and Mg2Zn0.2Mn in Hank’s solution at room temperatureZainal Abidin, Nor Ishida, Martin, Darren and Atrens, Andrej (2011). Corrosion of high purity Mg, AZ91, ZE41 and Mg2Zn0.2Mn in Hank’s solution at room temperature. Corrosion Science, 53 (3), 862-872. doi: 10.1016/j.corsci.2010.10.008 |
|
2011 Journal Article Stress corrosion cracking of magnesium alloysAtrens, A., Winzer, N. and Dietzel, W. (2011). Stress corrosion cracking of magnesium alloys. Advanced Engineering Materials, 13 (1-2), 11-18. doi: 10.1002/adem.200900287 |
|
2011 Journal Article Stress corrosion cracking (SCC) of magnesium alloysAtrens, A., Dietzel, W., Srinivasan, P. Bala, Winzer, N. and Kannan, M. Bobby (2011). Stress corrosion cracking (SCC) of magnesium alloys. Stress Corrosion Cracking: Theory and Practice, 341-380. |
