2024 Journal Article High-productivity, field-relevant assessment of relative fracture resistance for hard materials – The ball mill edge chipping test (BMECT)Gates, J. D., Pourasiabi, Hamid, Keen, Laura M., Dalton, Alexander, Bennet, P. J. and Ali, Yahia (2024). High-productivity, field-relevant assessment of relative fracture resistance for hard materials – The ball mill edge chipping test (BMECT). Materials and Design, 237 112537. doi: 10.1016/j.matdes.2023.112537 |
2023 Conference Publication Enhancing biocompatibility, antibacterial characteristics and corrosion rate of pure zinc by surface acid etchingXiang, Enmao, Cerezo, Maria Natividad Gomez, Ali, Yahia, Ramachandra, Srinivas Sulugodu, Yang, Nan, Dargusch, Matthew, Moran, Corey, Ivanovskii, Saso and Hay, Abdalla Abdal (2023). Enhancing biocompatibility, antibacterial characteristics and corrosion rate of pure zinc by surface acid etching. European Chapter of the Tissue Engineering and Regenerative Medicine International Society (TERMIS), Manchester, United Kingdom, 28 - 31 March 2023. New Rochelle, NY, United States: Mary Ann Liebert. doi: 10.1089/ten.tea.2023.29043.abstract |
2023 Journal Article Grain refinement mechanism and its effect on mechanical properties and biodegradation behaviors of Zn alloys – a reviewLuqman, Monis, Ali, Yahia, Zaghloul, Moustafa Mahmoud Y., Sheikh, Faheem A., Chan, Vincent and Abdal-hay, Abdalla (2023). Grain refinement mechanism and its effect on mechanical properties and biodegradation behaviors of Zn alloys – a review. Journal of Materials Research and Technology, 24, 7338-7365. doi: 10.1016/j.jmrt.2023.04.219 |
2023 Journal Article Effect of Cr:Fe ratio on the mechanical properties of (Cr,Fe)7C3 ternary carbides in abrasion-resistant white cast ironsJokari-Sheshdeh, Maziar, Ali, Yahia, Gallo, Santiago Corujeira, Lin, Weikang and Gates, J. D. (2023). Effect of Cr:Fe ratio on the mechanical properties of (Cr,Fe)7C3 ternary carbides in abrasion-resistant white cast irons. Journal of Materials Science, 58 (17), 7504-7521. doi: 10.1007/s10853-023-08461-z |
2022 Journal Article In vivo performance of a rare earth free Mg–Zn–Ca alloy manufactured using twin roll casting for potential applications in the cranial and maxillofacial fixation devicesDargusch, Matthew S., Balasubramani, Nagasivamuni, Yang, Nan, Johnston, Sean, Ali, Yahia, Wang, Gui, Venezuela, Jeffrey, Carluccio, Jiwon, Lau, Cora, Allavena, Rachel, Liang, Daniel, Mardon, Karine and Ye, Qingsong (2022). In vivo performance of a rare earth free Mg–Zn–Ca alloy manufactured using twin roll casting for potential applications in the cranial and maxillofacial fixation devices. Bioactive Materials, 12, 85-96. doi: 10.1016/j.bioactmat.2021.10.026 |
2022 Journal Article Surface modification of pure zinc by acid etching: accelerating the corrosion rate and enhancing biocompatibility and antibacterial characteristicsXiang, Enmao, Gómez-Cerezo, Maria Natividad, Ali, Yahia, Ramachandra, Srinivas Sulugodu, Yang, Nan, Dargusch, Matthew, Moran, Corey S., Ivanovski, Saso and Abdal-hay, Abdalla (2022). Surface modification of pure zinc by acid etching: accelerating the corrosion rate and enhancing biocompatibility and antibacterial characteristics. ACS Applied Materials and Interfaces, 14 (19), 22554-22569. doi: 10.1021/acsami.2c00918 |
2022 Journal Article Hydrogen sorption behaviour of Mg-5wt.%La alloys after the initial hydrogen absorption processKim, Manjin, Tan, Xin Fu, Gu, Qinfen, McDonald, Stuart D., Ali, Yahia, Matsumura, Syo and Nogita, Kazuhiro (2022). Hydrogen sorption behaviour of Mg-5wt.%La alloys after the initial hydrogen absorption process. International Journal of Hydrogen Energy, 47 (36), 16132-16143. doi: 10.1016/j.ijhydene.2022.03.102 |
2022 Journal Article Comparing the abrasion performance of NiHard-4 and high-Cr-Mo white cast irons: the effects of chemical composition and microstructureJokari-Sheshdeh, Maziar, Ali, Yahia, Gallo, Santiago Corujeira, Lin, Weikang and Gates, J.D. (2022). Comparing the abrasion performance of NiHard-4 and high-Cr-Mo white cast irons: the effects of chemical composition and microstructure. Wear, 492-493 204208, 204208. doi: 10.1016/j.wear.2021.204208 |
2022 Journal Article Evaluation of silicon effects on abrasion performance, microstructure and crystalline structure of NiHard-4 white cast iron using synchrotron X-ray diffractionJokari-Sheshdeh, Maziar, Ali, Yahia, Nué, Charline Le, Gallo, Santiago Corujeira, Tan, Xin Fu, Lin, Weikang and Gates, J.D. (2022). Evaluation of silicon effects on abrasion performance, microstructure and crystalline structure of NiHard-4 white cast iron using synchrotron X-ray diffraction. Materialia, 21 101332, 101332. doi: 10.1016/j.mtla.2022.101332 |
2022 Conference Publication Effect of Microstructural Refinement and Na Addition on Hydrogenation Kinetics of Cast Mg–Al–La Alloy During the First Hydrogen Absorption ProcessKim, Manjin, McDonald, Stuart D., Ali, Yahia, Abbott, Trevor B. and Nogita, Kazuhiro (2022). Effect of Microstructural Refinement and Na Addition on Hydrogenation Kinetics of Cast Mg–Al–La Alloy During the First Hydrogen Absorption Process. 23rd Magnesium Technology Symposium at the 151st TMS Annual Meeting and Exhibition, Anaheim, CA, United States, 27 February - 3 March 2022. Cham, Switzlerland: Springer International Publishing. doi: 10.1007/978-3-030-92533-8_12 |
2021 Journal Article The effect of Na addition on the first hydrogen absorption kinetics of cast hypoeutectic Mg–La alloysKim, Manjin, Gu, Qinfen, Hussain, Tanveer, Ali, Yahia, Abbott, Trevor B. and Nogita, Kazuhiro (2021). The effect of Na addition on the first hydrogen absorption kinetics of cast hypoeutectic Mg–La alloys. International Journal of Hydrogen Energy, 46 (53), 27096-27106. doi: 10.1016/j.ijhydene.2021.05.180 |
2021 Journal Article Towards in situ electro-generation of ferrate for drinking water treatment: a comparison of three low-cost sacrificial iron electrodesDiaz, M., Doederer, K., Keller, J., Cataldo, M., Donose, B. C., Ali, Y. and Ledezma, P. (2021). Towards in situ electro-generation of ferrate for drinking water treatment: a comparison of three low-cost sacrificial iron electrodes. Journal of Electroanalytical Chemistry, 880 114897, 114897. doi: 10.1016/j.jelechem.2020.114897 |
2020 Journal Article A rational interpretation of solidification microstructures in the Mg-rich corner of the Mg–Al–La systemKim, Manjin, McDonald, Stuart D., Abbott, Trevor B., Easton, Mark A., Ali, Yahia, StJohn, David H. and Nogita, Kazuhiro (2020). A rational interpretation of solidification microstructures in the Mg-rich corner of the Mg–Al–La system. Journal of Alloys and Compounds, 844 156068, 156068. doi: 10.1016/j.jallcom.2020.156068 |
2020 Journal Article Effect of Na and cooling rate on the activation of Mg-Ni alloys for hydrogen storageKim, Manjin, McDonald, Stuart D., Ali, Yahia, Abbott, Trevor and Nogita, Kazuhiro (2020). Effect of Na and cooling rate on the activation of Mg-Ni alloys for hydrogen storage. Journal of Nanoscience and Nanotechnology, 20 (8), 5192-5200. doi: 10.1166/jnn.2020.18529 |
2020 Conference Publication The Independent Effects of Cooling Rate and Na Addition on Hydrogen Storage Properties in Hypo-eutectic Mg AlloysKim, Manjin, Ali, Yahia, McDonald, Stuart D., Abbott, Trevor B. and Nogita, Kazuhiro (2020). The Independent Effects of Cooling Rate and Na Addition on Hydrogen Storage Properties in Hypo-eutectic Mg Alloys. 149th TMS Annual Meeting & Exhibition, San Diego, CA, United States, 23-27 February 2020. Cham, Switzerland: Springer. doi: 10.1007/978-3-030-36647-6_43 |
2019 Journal Article Reduced consumption of materials and hazardous chemicals for energy efficient production of metal parts through 3D printing of sand moldsSivarupan, Tharmalingam, Upadhyay, Meet, Ali, Yahia, El Mansori, Mohamed and Dargusch, Matthew S. (2019). Reduced consumption of materials and hazardous chemicals for energy efficient production of metal parts through 3D printing of sand molds. Journal of Cleaner Production, 224, 411-420. doi: 10.1016/j.jclepro.2019.03.158 |
2019 Journal Article Effects of ‘impact’ and abrasive particle size on the performance of white cast irons relative to low-alloy steels in laboratory ball millsAli, Yahia, Garcia-Mendoza, C. D. and Gates, J. D. (2019). Effects of ‘impact’ and abrasive particle size on the performance of white cast irons relative to low-alloy steels in laboratory ball mills. Wear, 426-427, 83-100. doi: 10.1016/j.wear.2019.01.048 |
2018 Journal Article Effect of cooling rate on grain refinement of cast aluminium alloysLiang, Guofang, Ali, Yahia, You, Guoqiang and Zhang, Ming-Xing (2018). Effect of cooling rate on grain refinement of cast aluminium alloys. Materialia, 3, 113-121. doi: 10.1016/j.mtla.2018.08.008 |
2017 Other Outputs Novel approaches to grain refinement of magnesium alloysAli, Yahia (2017). Novel approaches to grain refinement of magnesium alloys. PhD Thesis, School of Mechanical and Mining Engineering, The University of Queensland. doi: 10.14264/uql.2017.877 |
2017 Conference Publication Influence of CaO grain refiner addition on the microstructure and mechanical properties of As-cast Mg alloysAli, Yahia, Qiu, Dong and Zhang, Ming-Xing (2017). Influence of CaO grain refiner addition on the microstructure and mechanical properties of As-cast Mg alloys. Magnesium Technology 2017, San Diego, CA, United States, 26 February - 2 March 2017. Cham, Switzerland: Springer. doi: 10.1007/978-3-319-52392-7_16 |