Skip to menu Skip to content Skip to footer
Dr

Grant Edwards

Email: 
Phone: 
+61 7 334 67756

Overview

Availability

Dr Grant Edwards is:
Available for supervision

Qualifications

  • Bachelor of Business (Administration), The University of Queensland
  • Bachelor of Engineering, The University of Queensland
  • Bachelor of Small Business Management, The University of Queensland
  • Doctor of Philosophy, The University of Queensland

Works

Search Professor Grant Edwards’s works on UQ eSpace

41 works between 2001 and 2024

1 - 20 of 41 works

2024

Journal Article

Graphene/graphene oxide and melamine as synergistic additives for polyester nanocomposite coatings

Zhao, Yitian, Lin, Weikang, Edwards, Grant, Zou, Yanbin, Zhao, Xiujuan, Song, Shuning, Heitzmann, Michael, Martin, Darren, Grøndahl, Lisbeth, Lu, Mingyuan and Huang, Han (2024). Graphene/graphene oxide and melamine as synergistic additives for polyester nanocomposite coatings. Materials Chemistry and Physics, 320 129384. doi: 10.1016/j.matchemphys.2024.129384

Graphene/graphene oxide and melamine as synergistic additives for polyester nanocomposite coatings

2024

Journal Article

Mechanical properties and scratch recovery of nanoclay/polyester composite coatings for pre-coated metal (PCM) sheets

Lin, Weikang, Zhao, Yitian, Edwards, Grant, Guo, Qiang, Chen, Tianzhen, Song, Shuning, Heitzmann, Michael, Martin, Darren, Grøndahl, Lisbeth, Lu, Mingyuan and Huang, Han (2024). Mechanical properties and scratch recovery of nanoclay/polyester composite coatings for pre-coated metal (PCM) sheets. Composites Part B: Engineering, 273 111217. doi: 10.1016/j.compositesb.2024.111217

Mechanical properties and scratch recovery of nanoclay/polyester composite coatings for pre-coated metal (PCM) sheets

2022

Journal Article

Tribological performance of zeolite/sodium dodecylbenzenesulfonate hybrid water-based lubricants

Lin, Chih-Ling, Lin, Weikang, Huang, Shuiquan, Edwards, Grant, Lu, Mingyuan and Huang, Han (2022). Tribological performance of zeolite/sodium dodecylbenzenesulfonate hybrid water-based lubricants. Applied Surface Science, 598 153764, 153764. doi: 10.1016/j.apsusc.2022.153764

Tribological performance of zeolite/sodium dodecylbenzenesulfonate hybrid water-based lubricants

2022

Journal Article

A cleaner processing approach for cellulose reinforced thermoplastic polyurethane nanocomposites

Mohd Amin, Khairatun Najwa, Chaleat, Celine, Edwards, Grant, Martin, Darren J. and Annamalai, Pratheep Kumar (2022). A cleaner processing approach for cellulose reinforced thermoplastic polyurethane nanocomposites. Polymer Engineering & Science, 62 (3), 949-961. doi: 10.1002/pen.25899

A cleaner processing approach for cellulose reinforced thermoplastic polyurethane nanocomposites

2019

Journal Article

In vitro degradation of a unique porous PHBV scaffold manufactured using selective laser sintering

Diermann, Sven H., Lu, Mingyuan, Edwards, Grant, Dargusch, Matthew and Huang, Han (2019). In vitro degradation of a unique porous PHBV scaffold manufactured using selective laser sintering. Journal of Biomedical Materials Research - Part A, 107 (1), 154-162. doi: 10.1002/jbm.a.36543

In vitro degradation of a unique porous PHBV scaffold manufactured using selective laser sintering

2018

Journal Article

Property improvements of thermoplastic copolyester with a multifunctional mixture/nanofiller by reactive extrusion

Alosime, Eid M., Edwards, Grant A. and Martin, Darren J. (2018). Property improvements of thermoplastic copolyester with a multifunctional mixture/nanofiller by reactive extrusion. Journal of Applied Polymer Science, 135 (23) 46369, 46369. doi: 10.1002/app.46369

Property improvements of thermoplastic copolyester with a multifunctional mixture/nanofiller by reactive extrusion

2018

Journal Article

Atomic resolution of structural changes in elastic crystals of copper(II) acetylacetonate

Worthy, Anna, Grosjean, Arnaud, Pfrunder, Michael C., Xu, Yanan, Yan, Cheng, Edwards, Grant, Clegg, Jack K. and McMurtrie, John C. (2018). Atomic resolution of structural changes in elastic crystals of copper(II) acetylacetonate. Nature Chemisty, 10 (1), 65-69. doi: 10.1038/nchem.2848

Atomic resolution of structural changes in elastic crystals of copper(II) acetylacetonate

2017

Journal Article

Allometric scaling of skin thickness, elasticity, viscoelasticity to mass for micro-medical device translation: from mice, rats, rabbits, pigs to humans

Wei, Jonathan C J, Edwards, Grant A, Martin, Darren J, Huang, Han, Crichton, Michael L and Kendall, Mark A F (2017). Allometric scaling of skin thickness, elasticity, viscoelasticity to mass for micro-medical device translation: from mice, rats, rabbits, pigs to humans. Scientific reports, 7 (1) 15885, 1-16. doi: 10.1038/s41598-017-15830-7

Allometric scaling of skin thickness, elasticity, viscoelasticity to mass for micro-medical device translation: from mice, rats, rabbits, pigs to humans

2016

Journal Article

Characterization of Bombyx mori and Antheraea pernyi silk fibroins and their blends as potential biomaterials

Suzuki, Shuko, Chirila, Traian V. and Edwards, Grant A. (2016). Characterization of Bombyx mori and Antheraea pernyi silk fibroins and their blends as potential biomaterials. Progress in Biomaterials, 5 (3-4), 193-198. doi: 10.1007/s40204-016-0057-3

Characterization of Bombyx mori and Antheraea pernyi silk fibroins and their blends as potential biomaterials

2016

Journal Article

Scalable processing of thermoplastic polyurethane nanocomposites toughened with nanocellulose

Amin, Khairatun Najwa Mohd, Amiralian, Nasim, Annamalai, Pratheep K., Edwards, Grant, Chaleat, Celine and Martin, Darren J. (2016). Scalable processing of thermoplastic polyurethane nanocomposites toughened with nanocellulose. Chemical Engineering Journal, 302, 406-416. doi: 10.1016/j.cej.2016.05.067

Scalable processing of thermoplastic polyurethane nanocomposites toughened with nanocellulose

2016

Journal Article

Characterising the material properties at the interface between skin and a skin vaccination microprojection device

Crichton, Michael L., Archer-Jones, Cameron, Meliga, Stefano, Edwards, Grant, Martin, Darren, Huang, Han and Kendall, Mark A. F. (2016). Characterising the material properties at the interface between skin and a skin vaccination microprojection device. Acta Biomaterialia, 36, 186-194. doi: 10.1016/j.actbio.2016.02.039

Characterising the material properties at the interface between skin and a skin vaccination microprojection device

2016

Journal Article

What are the driving factors influencing the size distribution of airborne synthetic clay particles emitted from a jet milling process?

Faghihi, Ehsan Majd, Martin, Darren, Salimi, Farhad, Edwards, Grant, He, Congrong and Morawska, Lidia (2016). What are the driving factors influencing the size distribution of airborne synthetic clay particles emitted from a jet milling process?. Aerosol and Air Quality Research, 16 (1), 25-35. doi: 10.4209/aaqr.2015.03.0170

What are the driving factors influencing the size distribution of airborne synthetic clay particles emitted from a jet milling process?

2016

Conference Publication

Cleaner and scalable processing of cellulose nanocrystal reinforced thermoplastic polyurethane nanocomposites

Mohd Amin, Khairatun Najwa, Amiralian, Nasim , Annamalai, Pratheep Kumar , Edwards, Grant A. B., Chaleat, Celine and Martin, Darren J. (2016). Cleaner and scalable processing of cellulose nanocrystal reinforced thermoplastic polyurethane nanocomposites. TAPPI International Conference on Nanotechnology for Renewable Materials 2016, Grenoble, France, 13-16 June 2016. Peachtree Corners, GA United States: TAPPI Press.

Cleaner and scalable processing of cellulose nanocrystal reinforced thermoplastic polyurethane nanocomposites

2016

Book Chapter

The commercialisation of nanotechnology: the five critical success factors to a nanotech-enabled whole product

Belcher, Craig, Marshall, Richard, Edwards, Grant and Martin, Darren (2016). The commercialisation of nanotechnology: the five critical success factors to a nanotech-enabled whole product. Handbook of clinical nanomedicine: law, business, regulation, safety, and risk. (pp. 223-259) edited by Raj Bawa, Gerald F. Audette and Brian E. Reese. New York, NY United States: Pan Stanford Publishing. doi: 10.1201/b19910-20

The commercialisation of nanotechnology: the five critical success factors to a nanotech-enabled whole product

2015

Journal Article

Reduction of aspect ratio of fluoromica using high-energy milling

Zhu, Yingdong, Edwards, Grant A. and Martin, Darren J. (2015). Reduction of aspect ratio of fluoromica using high-energy milling. Applied Clay Science, 114, 315-320. doi: 10.1016/j.clay.2015.06.020

Reduction of aspect ratio of fluoromica using high-energy milling

2015

Journal Article

Structure-property relationships in copolyester elastomer-layered silicate nanocomposites

Alosime, Eid M., Edwards, Grant A. and Martin, Darren J. (2015). Structure-property relationships in copolyester elastomer-layered silicate nanocomposites. Journal of Applied Polymer Science, 132 (13) 41742, n/a-n/a. doi: 10.1002/app.41742

Structure-property relationships in copolyester elastomer-layered silicate nanocomposites

2015

Conference Publication

Acid-free isolation of cellulose nanocrystals and organic solvent free processing of thermoplastic polyurethane nanocomposites

Mohd Amin, Khairatun Najwa, Annamalai, Pratheep Kumar , Edwards, Grant A. B., Chaleat, Celine and Martin, Darren J. (2015). Acid-free isolation of cellulose nanocrystals and organic solvent free processing of thermoplastic polyurethane nanocomposites. European Polymer Congress EPF 2015, Dresden, Germany, 22-26 June 2015.

Acid-free isolation of cellulose nanocrystals and organic solvent free processing of thermoplastic polyurethane nanocomposites

2015

Journal Article

Are there generalizable trends in the release of airborne synthetic clay nanoparticles from a jet milling process?

Faghihi, Ehsan Majd, Martin, Darren, Clifford, Samuel, Edwards, Grant, He, Congrong, Asbach, Christof and Morawska,Lidia (2015). Are there generalizable trends in the release of airborne synthetic clay nanoparticles from a jet milling process?. Aerosol and Air Quality Research, 15 (2), 365-375. doi: 10.4209/aaqr.2014.06.0124

Are there generalizable trends in the release of airborne synthetic clay nanoparticles from a jet milling process?

2014

Conference Publication

Effects of processing method and nanofiller size on mechanical properties of biomedical thermoplastic polyurethane (TPU) nanocomposites

Osman, Azilin Fazlina, Edwards, Grant and Martin, Darren (2014). Effects of processing method and nanofiller size on mechanical properties of biomedical thermoplastic polyurethane (TPU) nanocomposites. 4th International Conference on Key Engineering Materials (ICKEM 2014), Bali, Indonesia, 22-23 March 2014. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/AMR.911.115

Effects of processing method and nanofiller size on mechanical properties of biomedical thermoplastic polyurethane (TPU) nanocomposites

2014

Conference Publication

Effect of processing route on the morphology of thermoplastic polyurethane (TPU) nanocomposites incorporating organofluoromica

Osman, Azlin Fazlina, Jack, Kevin, Edwards, Grant and Martin, Darren (2014). Effect of processing route on the morphology of thermoplastic polyurethane (TPU) nanocomposites incorporating organofluoromica. 2013 International Conference on Nanoscience and Nanotechnology, NANO-SciTech 2013, Shah Alam, Selangor, Malaysia, 1-4 March 2013. Zurich, Switzerland: Trans Tech. doi: 10.4028/www.scientific.net/AMR.832.27

Effect of processing route on the morphology of thermoplastic polyurethane (TPU) nanocomposites incorporating organofluoromica

Funding

Past funding

  • 2019
    Compounding of polypropylene and hdpe composites with magnetite
    Red Tractor Pty Ltd
    Open grant
  • 2019
    Milling of Silicon for Get AIM
    Get Aim
    Open grant
  • 2018 - 2019
    Graphene dispersion into bricks
    UniQuest Pty Ltd
    Open grant
  • 2018 - 2019
    Graphene as an additive to improve mechanical properties of thermoplastics and clay bodies
    UniQuest Pty Ltd
    Open grant
  • 2018 - 2019
    High energy milling of graphene modified polyol
    UniQuest Pty Ltd
    Open grant
  • 2018 - 2019
    TenasiTech Nanocomposites R&D - Apr-Dec 2018
    UniQuest Pty Ltd
    Open grant
  • 2017 - 2018
    Anti-scratch nanoadditive performance for plastics customers
    Innovation Connections
    Open grant
  • 2016 - 2017
    Optimisation of nano-additives for plastics customers
    Innovation Connections
    Open grant
  • 2014
    Nanocomposite R&D H22013-H12014 (labour elements)
    UniQuest Pty Ltd
    Open grant
  • 2005 - 2012
    Degradable packaging materials derived from renewable resources
    CRC for Polymers
    Open grant

Supervision

Availability

Dr Grant Edwards is:
Available for supervision

Before you email them, read our advice on how to contact a supervisor.

Supervision history

Current supervision

Completed supervision

Media

Enquiries

For media enquiries about Dr Grant Edwards's areas of expertise, story ideas and help finding experts, contact our Media team:

communications@uq.edu.au