Skip to menu Skip to content Skip to footer

2024

Journal Article

High-productivity, field-relevant assessment of relative fracture resistance for hard materials – The ball mill edge chipping test (BMECT)

Gates, J. D., Pourasiabi, Hamid, Keen, Laura M., Dalton, Alexander, Bennet, P. J. and Ali, Yahia (2024). High-productivity, field-relevant assessment of relative fracture resistance for hard materials – The ball mill edge chipping test (BMECT). Materials and Design, 237 112537. doi: 10.1016/j.matdes.2023.112537

High-productivity, field-relevant assessment of relative fracture resistance for hard materials – The ball mill edge chipping test (BMECT)

2023

Journal Article

Effect of Cr:Fe ratio on the mechanical properties of (Cr,Fe)7C3 ternary carbides in abrasion-resistant white cast irons

Jokari-Sheshdeh, Maziar, Ali, Yahia, Gallo, Santiago Corujeira, Lin, Weikang and Gates, J. D. (2023). Effect of Cr:Fe ratio on the mechanical properties of (Cr,Fe)7C3 ternary carbides in abrasion-resistant white cast irons. Journal of Materials Science, 58 (17), 7504-7521. doi: 10.1007/s10853-023-08461-z

Effect of Cr:Fe ratio on the mechanical properties of (Cr,Fe)7C3 ternary carbides in abrasion-resistant white cast irons

2022

Journal Article

Performance evaluation of high-chromium white cast irons dual-reinforced by niobium carbides in the inner circumference abrasion test with different abrasive rock types

Demirer, E., Pourasiabi, Hamid, Jarreta, D. D. and Gates, J. D. (2022). Performance evaluation of high-chromium white cast irons dual-reinforced by niobium carbides in the inner circumference abrasion test with different abrasive rock types. Journal of Materials Engineering and Performance, 32 (16), 7515-7526. doi: 10.1007/s11665-022-07642-2

Performance evaluation of high-chromium white cast irons dual-reinforced by niobium carbides in the inner circumference abrasion test with different abrasive rock types

2022

Journal Article

Ball mill abrasion test (BMAT): method development and statistical evaluations

Pourasiabi, Hamid and Gates, J. D. (2022). Ball mill abrasion test (BMAT): method development and statistical evaluations. MethodsX, 9 101900, 1-22. doi: 10.1016/j.mex.2022.101900

Ball mill abrasion test (BMAT): method development and statistical evaluations

2022

Journal Article

Comparing the abrasion performance of NiHard-4 and high-Cr-Mo white cast irons: the effects of chemical composition and microstructure

Jokari-Sheshdeh, Maziar, Ali, Yahia, Gallo, Santiago Corujeira, Lin, Weikang and Gates, J.D. (2022). Comparing the abrasion performance of NiHard-4 and high-Cr-Mo white cast irons: the effects of chemical composition and microstructure. Wear, 492-493 204208, 204208. doi: 10.1016/j.wear.2021.204208

Comparing the abrasion performance of NiHard-4 and high-Cr-Mo white cast irons: the effects of chemical composition and microstructure

2022

Journal Article

Evaluation of silicon effects on abrasion performance, microstructure and crystalline structure of NiHard-4 white cast iron using synchrotron X-ray diffraction

Jokari-Sheshdeh, Maziar, Ali, Yahia, Nué, Charline Le, Gallo, Santiago Corujeira, Tan, Xin Fu, Lin, Weikang and Gates, J.D. (2022). Evaluation of silicon effects on abrasion performance, microstructure and crystalline structure of NiHard-4 white cast iron using synchrotron X-ray diffraction. Materialia, 21 101332, 101332. doi: 10.1016/j.mtla.2022.101332

Evaluation of silicon effects on abrasion performance, microstructure and crystalline structure of NiHard-4 white cast iron using synchrotron X-ray diffraction

2022

Journal Article

Effects of matrix chromium-to-carbon ratio on high-stress abrasive wear behavior of high chromium white cast irons dual-reinforced by niobium carbides

Pourasiabi, Hamid and Gates, J. D. (2022). Effects of matrix chromium-to-carbon ratio on high-stress abrasive wear behavior of high chromium white cast irons dual-reinforced by niobium carbides. Tribology International, 167 107350, 1-29. doi: 10.1016/j.triboint.2021.107350

Effects of matrix chromium-to-carbon ratio on high-stress abrasive wear behavior of high chromium white cast irons dual-reinforced by niobium carbides

2022

Journal Article

Effects of chromium carbide volume fraction on high-stress abrasion performance of NbC-bearing high chromium white cast irons

Pourasiabi, Hamid and Gates, J.D. (2022). Effects of chromium carbide volume fraction on high-stress abrasion performance of NbC-bearing high chromium white cast irons. Wear, 498-499 204312, 204312. doi: 10.1016/j.wear.2022.204312

Effects of chromium carbide volume fraction on high-stress abrasion performance of NbC-bearing high chromium white cast irons

2022

Journal Article

Applying principal component analysis (PCA) to the selection of forensic analysis methodologies

Booker, Nigel K., Knights, Peter, Gates, J. D. and Clegg, Richard E. (2022). Applying principal component analysis (PCA) to the selection of forensic analysis methodologies. Engineering Failure Analysis, 132 105937, 105937. doi: 10.1016/j.engfailanal.2021.105937

Applying principal component analysis (PCA) to the selection of forensic analysis methodologies

2022

Journal Article

Objective selection of forensic analysis methodologies

Booker, Nigel K., Knights, Peter, Gates, Jeffrey D., Clegg, Richard E. and Woodhouse, John (2022). Objective selection of forensic analysis methodologies. Journal of Failure Analysis and Prevention, 22 (1), 241-258. doi: 10.1007/s11668-021-01297-2

Objective selection of forensic analysis methodologies

2022

Journal Article

Effects of abrasive rock type on CVF-dependent performance trends of white cast irons in the inner circumference abrasion test

Demirer, E., Pourasiabi, Hamid, McInnes, L. J., Knibbe, R. and Gates, J. D. (2022). Effects of abrasive rock type on CVF-dependent performance trends of white cast irons in the inner circumference abrasion test. Tribology Transactions, 65 (2), 308-323. doi: 10.1080/10402004.2021.2020385

Effects of abrasive rock type on CVF-dependent performance trends of white cast irons in the inner circumference abrasion test

2022

Journal Article

Effects of particle impingement and coarse particle abrasion on wear performance of white cast irons in sliding bed applications

Demirer, E., Pourasiabi, Hamid and Gates, J. D. (2022). Effects of particle impingement and coarse particle abrasion on wear performance of white cast irons in sliding bed applications. Tribology Transactions, 65 (4), 1-15. doi: 10.1080/10402004.2022.2069066

Effects of particle impingement and coarse particle abrasion on wear performance of white cast irons in sliding bed applications

2021

Journal Article

Effects of niobium macro-additions to high chromium white cast iron on microstructure, hardness and abrasive wear behaviour

Pourasiabi, Hamid and Gates, J. D. (2021). Effects of niobium macro-additions to high chromium white cast iron on microstructure, hardness and abrasive wear behaviour. Materials and Design, 212 110261, 110261. doi: 10.1016/j.matdes.2021.110261

Effects of niobium macro-additions to high chromium white cast iron on microstructure, hardness and abrasive wear behaviour

2021

Journal Article

Cognitive biases and the cultural disconnect between engineers and decision-makers

Booker, Nigel, Gates, Jeffrey D. and Knights, Peter (2021). Cognitive biases and the cultural disconnect between engineers and decision-makers. Technium Social Sciences Journal, 17, 35-64. doi: 10.47577/tssj.v17i1.2752

Cognitive biases and the cultural disconnect between engineers and decision-makers

2020

Journal Article

The need for an internationally recognised standard for engineering failure analysis

Booker, Nigel K., Clegg, Richard E., Knights, Peter and Gates, J. D. (2020). The need for an internationally recognised standard for engineering failure analysis. Engineering Failure Analysis, 110 104357, 104357. doi: 10.1016/j.engfailanal.2019.104357

The need for an internationally recognised standard for engineering failure analysis

2019

Journal Article

Effects of ‘impact’ and abrasive particle size on the performance of white cast irons relative to low-alloy steels in laboratory ball mills

Ali, Yahia, Garcia-Mendoza, C. D. and Gates, J. D. (2019). Effects of ‘impact’ and abrasive particle size on the performance of white cast irons relative to low-alloy steels in laboratory ball mills. Wear, 426-427, 83-100. doi: 10.1016/j.wear.2019.01.048

Effects of ‘impact’ and abrasive particle size on the performance of white cast irons relative to low-alloy steels in laboratory ball mills

2011

Journal Article

Adhesive tool wear in the cold roll forming process

Galakhar, Alexander S., Gates, Jeffrey D., Daniel, William J. T. and Meehan, Paul A. (2011). Adhesive tool wear in the cold roll forming process. Wear, 271 (11-12), 2728-2745. doi: 10.1016/j.wear.2011.05.047

Adhesive tool wear in the cold roll forming process

2008

Journal Article

Effect of abrasive mineral on alloy performance in the ball mill abrasion test

Gates, J. D., Dargusch, M. S., Walsh, J. J., Field, S. L., Hermand, M. J. -P., Delaup, B. G. and Saad, J. R. (2008). Effect of abrasive mineral on alloy performance in the ball mill abrasion test. Wear, 265 (5-6), 865-870. doi: 10.1016/j.wear.2008.01.008

Effect of abrasive mineral on alloy performance in the ball mill abrasion test

2008

Journal Article

The role of secondary carbide precipitation on the fracture toughness of a reduced carbon white iron

Kootsookos, A. and Gates, J. D. (2008). The role of secondary carbide precipitation on the fracture toughness of a reduced carbon white iron. Materials Science and Engineering: A, 490 (1-2), 313-318. doi: 10.1016/j.msea.2008.01.036

The role of secondary carbide precipitation on the fracture toughness of a reduced carbon white iron

2007

Journal Article

The meaning of high stress abrasion and its application in white cast irons

Gates, J. D., Gore, G. J., Hermand, M.J-P., Guerineau, M.J-P., Martin, P. B. and Saad, J. (2007). The meaning of high stress abrasion and its application in white cast irons. Wear, 263 (1-6 SPEC. ISS.), 6-35. doi: 10.1016/j.wear.2006.12.033

The meaning of high stress abrasion and its application in white cast irons