2024 Journal Article High-productivity, field-relevant assessment of relative fracture resistance for hard materials – The ball mill edge chipping test (BMECT)Gates, J. D., Pourasiabi, Hamid, Keen, Laura M., Dalton, Alexander, Bennet, P. J. and Ali, Yahia (2024). High-productivity, field-relevant assessment of relative fracture resistance for hard materials – The ball mill edge chipping test (BMECT). Materials and Design, 237 112537. doi: 10.1016/j.matdes.2023.112537 |
2023 Journal Article Effect of Cr:Fe ratio on the mechanical properties of (Cr,Fe)7C3 ternary carbides in abrasion-resistant white cast ironsJokari-Sheshdeh, Maziar, Ali, Yahia, Gallo, Santiago Corujeira, Lin, Weikang and Gates, J. D. (2023). Effect of Cr:Fe ratio on the mechanical properties of (Cr,Fe)7C3 ternary carbides in abrasion-resistant white cast irons. Journal of Materials Science, 58 (17), 7504-7521. doi: 10.1007/s10853-023-08461-z |
2022 Journal Article Performance evaluation of high-chromium white cast irons dual-reinforced by niobium carbides in the inner circumference abrasion test with different abrasive rock typesDemirer, E., Pourasiabi, Hamid, Jarreta, D. D. and Gates, J. D. (2022). Performance evaluation of high-chromium white cast irons dual-reinforced by niobium carbides in the inner circumference abrasion test with different abrasive rock types. Journal of Materials Engineering and Performance, 32 (16), 7515-7526. doi: 10.1007/s11665-022-07642-2 |
2022 Journal Article Ball mill abrasion test (BMAT): method development and statistical evaluationsPourasiabi, Hamid and Gates, J. D. (2022). Ball mill abrasion test (BMAT): method development and statistical evaluations. MethodsX, 9 101900, 1-22. doi: 10.1016/j.mex.2022.101900 |
2022 Journal Article Comparing the abrasion performance of NiHard-4 and high-Cr-Mo white cast irons: the effects of chemical composition and microstructureJokari-Sheshdeh, Maziar, Ali, Yahia, Gallo, Santiago Corujeira, Lin, Weikang and Gates, J.D. (2022). Comparing the abrasion performance of NiHard-4 and high-Cr-Mo white cast irons: the effects of chemical composition and microstructure. Wear, 492-493 204208, 204208. doi: 10.1016/j.wear.2021.204208 |
2022 Journal Article Effects of chromium carbide volume fraction on high-stress abrasion performance of NbC-bearing high chromium white cast ironsPourasiabi, Hamid and Gates, J.D. (2022). Effects of chromium carbide volume fraction on high-stress abrasion performance of NbC-bearing high chromium white cast irons. Wear, 498-499 204312, 204312. doi: 10.1016/j.wear.2022.204312 |
2022 Journal Article Evaluation of silicon effects on abrasion performance, microstructure and crystalline structure of NiHard-4 white cast iron using synchrotron X-ray diffractionJokari-Sheshdeh, Maziar, Ali, Yahia, Nué, Charline Le, Gallo, Santiago Corujeira, Tan, Xin Fu, Lin, Weikang and Gates, J.D. (2022). Evaluation of silicon effects on abrasion performance, microstructure and crystalline structure of NiHard-4 white cast iron using synchrotron X-ray diffraction. Materialia, 21 101332, 101332. doi: 10.1016/j.mtla.2022.101332 |
2022 Journal Article Effects of matrix chromium-to-carbon ratio on high-stress abrasive wear behavior of high chromium white cast irons dual-reinforced by niobium carbidesPourasiabi, Hamid and Gates, J. D. (2022). Effects of matrix chromium-to-carbon ratio on high-stress abrasive wear behavior of high chromium white cast irons dual-reinforced by niobium carbides. Tribology International, 167 107350, 1-29. doi: 10.1016/j.triboint.2021.107350 |
2022 Journal Article Applying principal component analysis (PCA) to the selection of forensic analysis methodologiesBooker, Nigel K., Knights, Peter, Gates, J. D. and Clegg, Richard E. (2022). Applying principal component analysis (PCA) to the selection of forensic analysis methodologies. Engineering Failure Analysis, 132 105937, 105937. doi: 10.1016/j.engfailanal.2021.105937 |
2022 Journal Article Objective selection of forensic analysis methodologiesBooker, Nigel K., Knights, Peter, Gates, Jeffrey D., Clegg, Richard E. and Woodhouse, John (2022). Objective selection of forensic analysis methodologies. Journal of Failure Analysis and Prevention, 22 (1), 241-258. doi: 10.1007/s11668-021-01297-2 |
2022 Journal Article Effects of abrasive rock type on CVF-dependent performance trends of white cast irons in the inner circumference abrasion testDemirer, E., Pourasiabi, Hamid, McInnes, L. J., Knibbe, R. and Gates, J. D. (2022). Effects of abrasive rock type on CVF-dependent performance trends of white cast irons in the inner circumference abrasion test. Tribology Transactions, 65 (2), 308-323. doi: 10.1080/10402004.2021.2020385 |
2022 Journal Article Effects of particle impingement and coarse particle abrasion on wear performance of white cast irons in sliding bed applicationsDemirer, E., Pourasiabi, Hamid and Gates, J. D. (2022). Effects of particle impingement and coarse particle abrasion on wear performance of white cast irons in sliding bed applications. Tribology Transactions, 65 (4), 1-15. doi: 10.1080/10402004.2022.2069066 |
2021 Journal Article Effects of niobium macro-additions to high chromium white cast iron on microstructure, hardness and abrasive wear behaviourPourasiabi, Hamid and Gates, J. D. (2021). Effects of niobium macro-additions to high chromium white cast iron on microstructure, hardness and abrasive wear behaviour. Materials and Design, 212 110261, 110261. doi: 10.1016/j.matdes.2021.110261 |
2021 Journal Article Cognitive biases and the cultural disconnect between engineers and decision-makersBooker, Nigel, Gates, Jeffrey D. and Knights, Peter (2021). Cognitive biases and the cultural disconnect between engineers and decision-makers. Technium Social Sciences Journal, 17, 35-64. doi: 10.47577/tssj.v17i1.2752 |
2020 Journal Article The need for an internationally recognised standard for engineering failure analysisBooker, Nigel K., Clegg, Richard E., Knights, Peter and Gates, J. D. (2020). The need for an internationally recognised standard for engineering failure analysis. Engineering Failure Analysis, 110 104357, 104357. doi: 10.1016/j.engfailanal.2019.104357 |
2019 Journal Article Effects of ‘impact’ and abrasive particle size on the performance of white cast irons relative to low-alloy steels in laboratory ball millsAli, Yahia, Garcia-Mendoza, C. D. and Gates, J. D. (2019). Effects of ‘impact’ and abrasive particle size on the performance of white cast irons relative to low-alloy steels in laboratory ball mills. Wear, 426-427, 83-100. doi: 10.1016/j.wear.2019.01.048 |
2014 Conference Publication Resistance to abrasive wear and metallurgical property assessment of nine casing-friendly hard-banding alloy chemistries: Abrasion resistance assessment using ASTM G65 methodology (standard test method for measuring abrasion with dry sand/rubber wheel apparatus)Haberer, Joe, Gates, Jeff and Fifield, Robin W.S. (2014). Resistance to abrasive wear and metallurgical property assessment of nine casing-friendly hard-banding alloy chemistries: Abrasion resistance assessment using ASTM G65 methodology (standard test method for measuring abrasion with dry sand/rubber wheel apparatus). Society of Petroleum Engineers - IADC/SPE Asia Pacific Drilling Technology Conference 2014: Driving Sustainable Growth Through Technology and Innovation 2014, Bangkok, Thailand, 25-27 August 2014. Richardson, TX United States: Society of Petroleum Engineers. |
2011 Journal Article Adhesive tool wear in the cold roll forming processGalakhar, Alexander S., Gates, Jeffrey D., Daniel, William J. T. and Meehan, Paul A. (2011). Adhesive tool wear in the cold roll forming process. Wear, 271 (11-12), 2728-2745. doi: 10.1016/j.wear.2011.05.047 |
2008 Journal Article Effect of abrasive mineral on alloy performance in the ball mill abrasion testGates, J. D., Dargusch, M. S., Walsh, J. J., Field, S. L., Hermand, M. J. -P., Delaup, B. G. and Saad, J. R. (2008). Effect of abrasive mineral on alloy performance in the ball mill abrasion test. Wear, 265 (5-6), 865-870. doi: 10.1016/j.wear.2008.01.008 |
2008 Journal Article The role of secondary carbide precipitation on the fracture toughness of a reduced carbon white ironKootsookos, A. and Gates, J. D. (2008). The role of secondary carbide precipitation on the fracture toughness of a reduced carbon white iron. Materials Science and Engineering: A, 490 (1-2), 313-318. doi: 10.1016/j.msea.2008.01.036 |