|
2022 Conference Publication Investigation of the singularity under non-proportional damping in an analytical solution of brake squealXie, Caiyu and Meehan, Paul A. (2022). Investigation of the singularity under non-proportional damping in an analytical solution of brake squeal. 183rd Meeting of the Acoustical Society of America, Nashville, TN United States, 5-9 December 2022. Melville, NY United States: AIP Publishing. doi: 10.1121/10.0015749 |
|
2022 Conference Publication Application of μCT (micro-computed tomography) for measuring rolling contact wear in railway bearingsLin, Chih-Ling, Pozzebon, Matthew, Sokoloeski, Kamil A. and Meehan, Paul A. (2022). Application of μCT (micro-computed tomography) for measuring rolling contact wear in railway bearings. 12th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems (CM2022), Melbourne, VIC, Australia, 4 - 7 September 2022. Clayton, VIC, Australia: Monash Institute of Railway Technology . |
|
2022 Conference Publication Experimental investigation of wheel squeal noise under mode couplingLiu, Sheng, De Silva, Uditha, Chen, Da, Leslie, Andrew and Meehan, Paul (2022). Experimental investigation of wheel squeal noise under mode coupling. 12th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems (CM2022), Melbourne, VIC Australia, 4-7 September 2022. Clayton, VIC Australia: Monash Institute of Railway Technology. |
|
2022 Conference Publication Roller-race contact mechanics in railway axle bearings and its impact on wearPozzebon, Matthew L. and Meehan, Paul A. (2022). Roller-race contact mechanics in railway axle bearings and its impact on wear. 12th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Melbourne, VIC, Australia, 4 - 7 September 2022. Clayton, VIC, Australia: Monash Institute of Railway Technology . |
|
2022 Conference Publication On the rolling contact conformity behaviour and wear distribution in a railway axle bearingMannan, Abdul, Daniel, W. J. T. and Meehan, P. A. (2022). On the rolling contact conformity behaviour and wear distribution in a railway axle bearing. 12th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems (CM2022), Melbourne, VIC, Australia, 4 - 7 September 2022. Clayton, VIC, Australia: Monash Institute of Railway Technology . |
|
2022 Conference Publication Introduction of rail cleaning effect into locomotive traction study based on tribometer measurementsShrestha, Sundar, Spiryagin, Maksym, Harisson, Harold, Persson, Ingemar, Meehan, Paul, Wu, Qing, Spiryagin, Valentyn, Bosomworth, Chris and Cole, Colin (2022). Introduction of rail cleaning effect into locomotive traction study based on tribometer measurements. 2nd International Conference on Rail Transportation (ICRT), Chengdu, China, 5 - 6 July 2021. Reston, VA, United States: American Society of Civil Engineers. doi: 10.1061/9780784483886.006 |
|
2021 Conference Publication Race conformity effect on the contact and wear characteristics of spherical roller bearingsMannan, Abdul, Daniel, W. J. T. and Meehan, P. A. (2021). Race conformity effect on the contact and wear characteristics of spherical roller bearings. ACAM10: 10th Australasian Congress on Applied Mechanics, Virtual, 29 November - 1 December 2021. Barton, ACT, Australia: Engineers Australia. |
|
2019 Conference Publication An investigation on manufacturing of AHSS square tube product combining chain-die forming and roll forming processesWang, Chang, Qian, Zhen, Xiong, Ziliu, Sun, Yong, An, Kang, Meehan, Paul A. , Daniel, William J.T. and Ding, Shichao (2019). An investigation on manufacturing of AHSS square tube product combining chain-die forming and roll forming processes. The 13th International Conference on Numerical Methods in Industrial Forming Processes, Portsmouth, NH, United States, 23-27 June 2019. Pittsburgh, PA, United States: The Minerals, Metals & Materials Society (TMS) . |
|
2019 Conference Publication Numerical investigation of downhill strategy in chain-die formingAn, K., Qian, Z., Wang, C., Sun, Y., Ding, S. and Meehan, P. A. (2019). Numerical investigation of downhill strategy in chain-die forming. The 13th International Conference on Numerical Methods in Industrial Forming Processes, Portsmouth, NH USA, 23-27 June 2019. |
|
2019 Conference Publication Numerical investigation of the influential factors regarding forming load in Chain-die forming processQian, Zhen, Wang, Chang, Sun, Yong, An, Kang, Meehan, Paul A., Daniel, William J.T. and Ding, Shichao (2019). Numerical investigation of the influential factors regarding forming load in Chain-die forming process. The 13th International Conference on Numerical Methods in Industrial Forming Processes, Portsmouth, NH, United States, 23-27 June 2019. |
|
2018 Conference Publication Study of wear debris in grease-lubricated axle bearings using sem/edx analytical techniqueLin, Chih-Ling and Meehan, Paul (2018). Study of wear debris in grease-lubricated axle bearings using sem/edx analytical technique. 11th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, CM 2018, Delft, Netherlands, 24-27 September 2018. Delft, Netherlands: TU Delft. |
|
2018 Conference Publication Prediction of wheel squeal noise under waterbased friction modifiers based on instantaneous rolling contact mechanicsMeehan, Paul A. and Liu, Xiaogang (2018). Prediction of wheel squeal noise under waterbased friction modifiers based on instantaneous rolling contact mechanics. 11th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, CM 2018, Delft, Netherlands, 24-27 September 2018. Delft, Netherlands: Delft University of Technology. |
|
2018 Conference Publication Prediction of wheel squeal amplitudeMeehan, Paul A. and Liu, Xiaogang (2018). Prediction of wheel squeal amplitude. International Workshop on Railway Noise, Terrigal, NSW, Australia, 12-16 September 2016. Cham, Switzerland: Springer. doi: 10.1007/978-3-319-73411-8_4 |
|
2018 Conference Publication Investigation of lateral adhesion at wheel/rail interface under wet conditionLiu, Xiaogang and Meehan, Paul A. (2018). Investigation of lateral adhesion at wheel/rail interface under wet condition. 11th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, CM 2018, Delft,, September 24, 2018-September 27, 2018. Netherlands: TU Delft. |
|
2018 Conference Publication Investigation of wear degradation of railway spherical roller bearingsMeehan, Paul A., Milne, Cameron D. and Liu, Sheng (2018). Investigation of wear degradation of railway spherical roller bearings. 25th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2017, Rockhampton, QLD, August 14, 2017-August 18, 2017. BOCA RATON: CRC Press/Balkema. |
|
2017 Conference Publication Modelling of grease lubrication decayPozzebon, M. L. and Meehan, P. A. (2017). Modelling of grease lubrication decay. 9th Australasian Congress on Applied Mechanics, ACAM 2017, Sydney, Australia, 27-29 November 2017. Barton, ACT, Australia: Engineers Australia. |
|
2017 Conference Publication Investigation on wrinkling deformation in multi-pass incremental sheet forming processLiu, Zhaobing and Meehan, Paul A. (2017). Investigation on wrinkling deformation in multi-pass incremental sheet forming process. 13th Asia-Pacific Symposium on Engineering Plasticity and its Applications, AEPA 2016, Hiroshima, , December 4, 2016-December 8, 2016. Pfaffikon, Switzerland: Scientific.Net. doi: 10.4028/www.scientific.net/KEM.725.578 |
|
2017 Conference Publication FEM Investigation of Ductile Fracture Prediction in Two-Point Incremental Sheet Metal Forming processWang, Chenhao, Daniel, William J.T., Lu, Haibo, Liu, Sheng and Meehan, Paul A. (2017). FEM Investigation of Ductile Fracture Prediction in Two-Point Incremental Sheet Metal Forming process. International Conference on the Technology of Plasticity, ICTP 2017, Cambridge, United Kingdom, September 17, 2017-September 22, 2017. Amsterdam, NX Netherlands: Elsevier . doi: 10.1016/j.proeng.2017.10.838 |
|
2017 Conference Publication Determination of microstructure evolution in metallic components introduced by Chain-die formingSun, Yong, Khan, Sabrina, Qian, Zhen, Daniel, William J. T., Meehan, Paul A., Yanagimoto, Jun and Ding, Shichao (2017). Determination of microstructure evolution in metallic components introduced by Chain-die forming. International Conference on the Technology of Plasticity, ICTP 2017, Cambridge, United Kingdom, 17-22 September 2017. Amsterdam, The Netherlands: Elsevier. doi: 10.1016/j.proeng.2017.10.886 |
|
2017 Conference Publication An experimental and numerical study on forming force, fracture behavior, and strain states in two point incremental forming processWang, Chenhao, Daniel, William J. T., Lu, Haibo, Liu, Sheng and Meehan, Paul A. (2017). An experimental and numerical study on forming force, fracture behavior, and strain states in two point incremental forming process. Pfaffikon, Switzerland: Scientific.Net. doi: 10.4028/www.scientific.net/KEM.725.586 |
