Professor Martin Veidt
Professor

Martin Veidt

Email: 
Phone: 
+61 7 336 53621

Background

Dr Martin Veidt's research interests are in applied mechanics covering all aspects of through life support of materials and structures with a special focus on composites such as fibre-reinforced laminates, sandwich structures and hybrid metal fibre laminates. This includes quality assurance and quantitative non-destructive evaluation using conventional, guided wave and non-linear ultrasonics; stress analysis and damage mechanics; and experimental determination of mechanical characteristics of materials and interfaces.

He received his Dr sc techn from the Swiss Federal Institute of Technology (ETH) in Zurich in 1991 and his Dipl Masch Ing ETH from there in 1986. His current research projects are in the fields of:

  • Non-linear ultrasonics
  • Ultrasonic manipulation of microbubbles for drug delivery
  • Functional composites
  • Hybrid composite laminates
  • Light weighting

Availability

Professor Martin Veidt is:
Not available for supervision

Fields of research

Engineering Materials engineering

Qualifications

  • Bachelor of Engineering, Swiss Federal Institute of Technology ETH Zürich
  • Doctor of Philosophy, Swiss Federal Institute of Technology ETH Zürich

Research interests

  • Applied Mechanics

  • Nondestructive Evaluation, Ultrasonics, Guided Wave Ultrasonics, Non-linear Ultrasonics

  • Ultrasonic Manipulation of Microbubbles

  • Structural Health Management

  • Composite Materials

  • Light Weighting

  • Damage Modelling

Search Professor Martin Veidt’s works on UQ eSpace

216 works between 1990 and 2024
All (216) Journal Article (100) Book Chapter (5) Conference Publication (109) Other Outputs (1) Edited Outputs (1)

1 - 20 of 216 works

2024

Journal Article

Determining rock crack stress thresholds using ultrasonic through-transmission measurements

He, Jiangwan, Serati, Mehdi, Veidt, Martin and De Alwis, Arthur (2024). Determining rock crack stress thresholds using ultrasonic through-transmission measurements. International Journal of Coal Science & Technology, 11 (1) 19, 1-14. doi: 10.1007/s40789-024-00669-x

Determining rock crack stress thresholds using ultrasonic through-transmission measurements

2024

Journal Article

Assessment of the tribological performance of glass fibre reinforced polyamide 6 under harsh abrasive environments

Zaghloul, Moustafa Mahmoud Yousry, Steel, Karen, Veidt, Martin and Heitzmann, Michael T. (2024). Assessment of the tribological performance of glass fibre reinforced polyamide 6 under harsh abrasive environments. Tribology International, 191 109059. doi: 10.1016/j.triboint.2023.109059

Assessment of the tribological performance of glass fibre reinforced polyamide 6 under harsh abrasive environments

2024

Conference Publication

Layup optimisation and response of lightweight composite tubular structures under thermomechanical loading conditions using particle swarm optimisation

Veivers, Harry, Bermingham, Michael, Dunn, Mitch and Veidt, Martin (2024). Layup optimisation and response of lightweight composite tubular structures under thermomechanical loading conditions using particle swarm optimisation. 11th Australasian Congress on Applied Mechanics (ACAM 2024), Brisbane, QLD, Australia, 7-9 February 2024. Brisbane, QLD, Australia: Engineers Australia.

Layup optimisation and response of lightweight composite tubular structures under thermomechanical loading conditions using particle swarm optimisation

2024

Conference Publication

Efficient finite element simulation of NCF Composites under biaxial loads

Gomez, Calvin, Dunn, Mitch, Veidt, Martin and Reiner, Johannes (2024). Efficient finite element simulation of NCF Composites under biaxial loads. 11th Australasian Congress on Applied Mechanics (ACAM 2024), Brisbane, QLD, Australia, 7-9 February 2024. Barton, ACT, Australia: Engineers Australia.

Efficient finite element simulation of NCF Composites under biaxial loads

2024

Conference Publication

Application of scaling subtraction methods for characterising nonlinearity in disparate rocks

He, Jiangwan, Veidt, Martin, Carcione, Alessandro and Serati, Mehdi (2024). Application of scaling subtraction methods for characterising nonlinearity in disparate rocks. ACAM 2024, Brisbane, QLD, Australia, 7-9 February 2024. Brisbane, QLD, Australia: Engineers Australia.

Application of scaling subtraction methods for characterising nonlinearity in disparate rocks

2024

Conference Publication

Time-domain nonlinear ultrasonics for damage assessment and integrity evaluation of materials and structures

Veidt, Martin, Dunn, Mitch and Carcione, Alessandro (2024). Time-domain nonlinear ultrasonics for damage assessment and integrity evaluation of materials and structures. 11th Australasian Congress on Applied Mechanics (ACAM 2024), Brisbane, QLD, Australia, 7-9 February 2024. Brisbane, QLD, Australia: Engineers Australia.

Time-domain nonlinear ultrasonics for damage assessment and integrity evaluation of materials and structures

2024

Journal Article

A systematic review of artificial neural network techniques for analysis of foot plantar pressure

Wang, Chongguang, Evans, Kerrie, Hartley, Dean, Morrison, Scott, Veidt, Martin and Wang, Gui (2024). A systematic review of artificial neural network techniques for analysis of foot plantar pressure. Biocybernetics and Biomedical Engineering, 44 (1), 197-208. doi: 10.1016/j.bbe.2024.01.005

A systematic review of artificial neural network techniques for analysis of foot plantar pressure

2023

Journal Article

Ultrasound in solids: how to use laser feedback interferometry to visualize elastic waves

Bertling, Karl, Veidt, Martin, Perchoux, Julien and Rakic, Aleksandar (2023). Ultrasound in solids: how to use laser feedback interferometry to visualize elastic waves. Optics Express, 31 (20) 497676, 32761-32771. doi: 10.1364/oe.497676

Ultrasound in solids: how to use laser feedback interferometry to visualize elastic waves

2023

Journal Article

Influence of Counter-Face Grit Size and Lubricant on the Abrasive Wear Behaviour of Thermoplastic Polymers Reinforced with Glass Fibres

Zaghloul, Moustafa Mahmoud Yousry, Steel, Karen, Veidt, Martin, Martin, Darren, Firouzi, Mahshid and Heitzmann, Michael T. (2023). Influence of Counter-Face Grit Size and Lubricant on the Abrasive Wear Behaviour of Thermoplastic Polymers Reinforced with Glass Fibres. Tribology Letters, 71 (3) 102, 1-22. doi: 10.1007/s11249-023-01774-9

Influence of Counter-Face Grit Size and Lubricant on the Abrasive Wear Behaviour of Thermoplastic Polymers Reinforced with Glass Fibres

2023

Conference Publication

Detecting contact acoustic nonlinearity in TOFD measurements via quasistatic loading

Carcione, Alessandro and Veidt, Martin (2023). Detecting contact acoustic nonlinearity in TOFD measurements via quasistatic loading. 9th Asia-Pacific Workshop on Structural Health Monitoring, 9APWSHM 2022, Cairns, QLD Australia, 7-9 December 2022. Millersville, PA United States: Materials Research Forum LLC. doi: 10.21741/9781644902455-47

Detecting contact acoustic nonlinearity in TOFD measurements via quasistatic loading

2023

Journal Article

Mechanical and tribological performances of thermoplastic polymers reinforced with glass fibres at variable fibre volume fractions

Zaghloul, Moustafa Mahmoud Yousry, Steel, Karen, Veidt, Martin and Heitzmann, Michael T. (2023). Mechanical and tribological performances of thermoplastic polymers reinforced with glass fibres at variable fibre volume fractions. Polymers, 15 (3) 694, 1-23. doi: 10.3390/polym15030694

Mechanical and tribological performances of thermoplastic polymers reinforced with glass fibres at variable fibre volume fractions

2023

Journal Article

Finite Element Simulation of Fiber Reinforced Composites under Bi-Axial Loading

Gomez, Calvin, Dunn, Mitchell, Veidt, Martin and Reiner, Johannes (2023). Finite Element Simulation of Fiber Reinforced Composites under Bi-Axial Loading. International Journal of Computational Methods, 21 (08) 2241004. doi: 10.1142/s0219876222410043

Finite Element Simulation of Fiber Reinforced Composites under Bi-Axial Loading

2023

Conference Publication

Mechanical and RF characterisation of SMA connections in functional composite laminates

Dunn, Mitch, Carcione, Alessandro, Khoury-Brooks, Mark, Yarrow, Sean and Veidt, Martin (2023). Mechanical and RF characterisation of SMA connections in functional composite laminates. 23rd International Conference on Composite Materials (ICCM23), Belfast, United Kingdom, July 30 - August 4, 2023. Northern Ireland, United Kingdom: Queen's University Belfast.

Mechanical and RF characterisation of SMA connections in functional composite laminates

2023

Journal Article

A systematic review of ultrasound-mediated drug delivery to the eye and critical insights to facilitate a timely path to the clinic

Rad, Isaac J., Chapman, Luke, Tupally, Karnaker Reddy, Veidt, Martin, Al-Sadiq, Hussain, Sullivan, Robert and Parekh, Harendra S (2023). A systematic review of ultrasound-mediated drug delivery to the eye and critical insights to facilitate a timely path to the clinic. Theranostics, 13 (11), 3582-3638. doi: 10.7150/thno.82884

A systematic review of ultrasound-mediated drug delivery to the eye and critical insights to facilitate a timely path to the clinic

2022

Journal Article

Composite springs for mooring tensioners: a systematic review of material selection, fatigue performance, manufacturing, and applications

Cai, Yuanzhen, Bazli, Milad, Basnayake, Asanka P., Veidt, Martin and Heitzmann, Michael T. (2022). Composite springs for mooring tensioners: a systematic review of material selection, fatigue performance, manufacturing, and applications. Journal of Marine Science and Engineering, 10 (9) 1286, 1-34. doi: 10.3390/jmse10091286

Composite springs for mooring tensioners: a systematic review of material selection, fatigue performance, manufacturing, and applications

2022

Journal Article

Multi-physics study of acoustofluidic delivery agents' clustering behavior

AlSadiq, Hussain, Tupally, Karnaker Reddy, Vogel, Robert, Parekh, Harendra S. and Veidt, Martin (2022). Multi-physics study of acoustofluidic delivery agents' clustering behavior. Physics in Medicine and Biology, 67 (1) 015002, 015002. doi: 10.1088/1361-6560/ac4666

Multi-physics study of acoustofluidic delivery agents' clustering behavior

2021

Journal Article

Layup optimisation of laminated composite tubular structures under thermomechanical loading conditions using PSO

Veivers, Harry, Bermingham, Michael, Dunn, Mitchell and Veidt, Martin (2021). Layup optimisation of laminated composite tubular structures under thermomechanical loading conditions using PSO. Composite Structures, 276 114483, 114483. doi: 10.1016/j.compstruct.2021.114483

Layup optimisation of laminated composite tubular structures under thermomechanical loading conditions using PSO

2021

Conference Publication

Quantifying contact acoustic nonlinearity in TOFD measurements via quasi-static loading

Carcione, Alessandro, Veidt, Martin and Pettigrew, Irene G. (2021). Quantifying contact acoustic nonlinearity in TOFD measurements via quasi-static loading. UT-Online 2021, Online, 1-30 November 2021. Online: NDT.net.

Quantifying contact acoustic nonlinearity in TOFD measurements via quasi-static loading

2021

Journal Article

Local buckling of FRP thin-walled plates, shells and hollow sections with curved edges and arbitrary lamination

Higginson, K., Fernando, D., Veidt, M., Burnton, P., You, Z. and Heitzmann, M. (2021). Local buckling of FRP thin-walled plates, shells and hollow sections with curved edges and arbitrary lamination. Thin-Walled Structures, 168 108242, 1-18. doi: 10.1016/j.tws.2021.108242

Local buckling of FRP thin-walled plates, shells and hollow sections with curved edges and arbitrary lamination

2021

Conference Publication

Pulse compression for improved signal-to-noise ratio in ultrasonic testing

Carcione, Alessandro, Veidt, Martin and Pettigrew, Irene G. (2021). Pulse compression for improved signal-to-noise ratio in ultrasonic testing. UT-Online 2021, Online, 1-30 November 2021. Online: NDT.net.

Pulse compression for improved signal-to-noise ratio in ultrasonic testing

Past funding

  • 2024
    Improving resistance to stress corrosion cracking (SCC) of high-performance aluminim alloys by tailoring alloying elements and microstructure
    Baosteel-Australia Joint Research and Development
    Open grant
  • 2023 - 2024
    Functional composite antenna and radio communications system integration
    Defence Materials Technology Centre
    Open grant
  • 2022 - 2024
    Designed-led advanced manufacturing of smart orthotics for remote Australia (CRC-P administered by iOrthotics)
    iOrthotics Pty Ltd
    Open grant
  • 2021 - 2024
    Industry 4.0 Technical Support (Qld)
    Defence Materials Technology Centre
    Open grant
  • 2020 - 2021
    Non-linear TOFD for the Inspection of Challenging Materials
    Innovation Connections
    Open grant
  • 2020
    Smart Enough Factory Pilot Project
    Defence Materials Technology Centre
    Open grant
  • 2020
    Blue Economy Biofouling Challenges and Possible Solutions
    Blue Economy CRC-Co Ltd
    Open grant
  • 2020
    Review and Optimisation of Dynamic Response Spectroscopy (DRS) Method
    Sonomatic Limited
    Open grant
  • 2019 - 2023
    Functional Antenna Structures
    Defence Materials Technology Centre
    Open grant
  • 2018 - 2023
    Networked FAST Collaboration
    Defence Materials Technology Centre
    Open grant
  • 2018 - 2021
    Nonlinear frequency mixing methods for materials and damage evaluation (ARC Discovery Project administered by the University of New South Wales)
    University of New South Wales
    Open grant
  • 2018 - 2019
    Product innovation project: cascade tyre handler
    Innovation Connections
    Open grant
  • 2018
    Characterisation of epoxy cure kinetics and mechanical performance
    Teakle Composites
    Open grant
  • 2018 - 2019
    The Smart Factory in a Box - IoT Capability Builder
    Defence Materials Technology Centre
    Open grant
  • 2017 - 2020
    Hybrid Composite Materials and Structures
    Defence Materials Technology Centre
    Open grant
  • 2017 - 2018
    Bridging time/size scales in strain measurements with advanced DIC facility (ARC LIEF project administered by The University of Adelaide)
    University of Adelaide
    Open grant
  • 2017 - 2019
    High power density motors incorporating advanced manufacturing methods (CRC - Project led by MagniX)
    Cooperative Research Centre Projects
    Open grant
  • 2016 - 2023
    ARC Research Hub for Advanced Manufacturing of Medical Devices
    ARC Industrial Transformation Research Hubs
    Open grant
  • 2016 - 2017
    High temperature Composite Research in support of the HiFiRE program
    Commonwealth Department of Defence Science and Technology Organisation
    Open grant
  • 2016 - 2017
    Automated fibre braiding facility for multifunctional structural materials (ARC LIEF project administered by RMIT University)
    Royal Melbourne Institute of Technology University
    Open grant
  • 2016
    Investigation of filament winding as an alternative manufacturing route for C/C SCRAM jet combustors
    Commonwealth Defence Science and Technology Group
    Open grant
  • 2016
    Millimetre Waves for Imaging and Sensing
    UQ Major Equipment and Infrastructure
    Open grant
  • 2015 - 2024
    Cross program management
    Defence Materials Technology Centre
    Open grant
  • 2015 - 2018
    Light Weight Material Solutions
    Defence Materials Technology Centre
    Open grant
  • 2015 - 2017
    Baseline-free methods for early damage diagnosis using nonlinear ultrasound (ARC Discovery Project administered by RMIT University)
    University of New South Wales
    Open grant
  • 2015
    Innovating short cycle time manufacturing process for aerospace thermoplastic composites
    UQ Collaboration and Industry Engagement Fund - Seed Research Grant
    Open grant
  • 2014
    MOC - Timothy Cullen (CRC ACS Project 1.1)
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2013 - 2015
    CRC for Advanced Composite Structures Extension Programme: Research Fellow - Dr Blanloeuil
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2013 - 2014
    Performance level structural testing facility
    ARC Linkage Infrastructure, Equipment and Facilities
    Open grant
  • 2013 - 2015
    CRC for Advanced Composite Structures Extension Program - Luigi Vandi
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2012 - 2014
    Towards Autonomous Structural Safety Prognostics: Integrating in-situ Imaging and Predictive Modelling (ARC Discovery Project administered by RMIT)
    Royal Melbourne Institute of Technology University
    Open grant
  • 2011 - 2013
    CRC for Advanced Composite Structures Extension Programme: Research Fellow - Dr Virk
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2011
    CRC for Advanced Composite Structures Extension Program
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2011
    Complete laboratory to semi-industry scale high energy milling and dispersion facility.
    UQ Major Equipment and Infrastructure
    Open grant
  • 2010 - 2011
    CRC for Advanced Composite Structures Extension Program
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2010 - 2013
    CRC for Advanced Composite Structures Extension Program: Research Fellow - Dr Edmund Liew
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2010 - 2015
    Robust Composite Repairs (P3.1)
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2010 - 2015
    Systems Development for Structural Health Monitoring (P3.3)
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2010
    Evaluation of the Flammability, Smoke and Toxicity and Heat Release performance of Castor Plant Composites for Aircraft Cabin Interiors
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2010
    Inspection and repair methods for composite helicopter fuselage structures
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2008 - 2015
    Aircraft prognostic tools to reduce corrosion impacts (DMTC)
    Defence Materials Technology Centre
    Open grant
  • 2008 - 2010
    Research services
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2008 - 2009
    Research services
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2007 - 2008
    Validating a new methodology for the characterisation of structural damage using plate-wave diffraction tomography
    Department Defence - Defence Science & Technology
    Open grant
  • 2007 - 2009
    Tomographic Imaging of Structural Damage in Plates
    ARC Discovery Projects
    Open grant
  • 2005
    Acousto-Ultrasonic Characterisation and Imaging of Structural Damage
    Department Defence - Defence Science & Technology
    Open grant
  • 2004
    Coal Blending for the Production of Metallurgical Coke of High Quality
    UQ FirstLink Scheme
    Open grant
  • 2004
    2004 Travel Scheme Cat 2_Imperial College London; 24/05/04 to 15/06/04
    UQ Travel Grants Scheme
    Open grant
  • 2004 - 2005
    Development and application of a pressure-sensing electropalatograph for the assessment and treatment of speech disorders
    NHMRC Project - Development Grant
    Open grant
  • 2004
    New Frontiers in Structural Health Monitoring
    ARC Seed Funding for Research Networks
    Open grant
  • 2003 - 2004
    Plate Wave Tomography for Reconstruction of Laminar Defects
    ARC Discovery Projects
    Open grant
  • 2002
    Collaborative research with Prof. Hung, City Univ. of Hong Kong, in the area of health monitoring of fibre-reinforced civil infrastructure repair patches.
    UQ Travel Grants Scheme
    Open grant
  • 2002
    Development and application of a pressure-sensing electropalatograph for the assessment and treatment of chron speech disorders
    University of Queensland Research Development Grants Scheme
    Open grant
  • 2002
    Investigating the fluidity of lumbar spine intervetebral discs using MRI and poroeleastic FE modelling
    University of Queensland Research Development Grants Scheme
    Open grant
  • 2001 - 2003
    Inertial response characteristics and energy absorption efficiency of aluminium foam structrual components to medium velocity impacts
    UQ FirstLink Scheme
    Open grant
  • 2000
    Ultrasonic Non-destructive Evaluation for Erosion-Corrosion Quantification.
    ARC Australian Research Council (Small grants)
    Open grant
  • 1999 - 2001
    Studies on a Sensitive Accurate and Reliable Stress Wave Factor Technique for the Assessment of Composite Structures
    ARC Australian Research Council (Large grants)
    Open grant
  • 1999
    Towards an integrated service life assessment system for drill rods
    UQ Early Career Researcher
    Open grant
  • 1999
    Travel scheme for collaborative research by Dr M Veidt at the Ultrasonics Group, Cornell University USA
    UQ Travel Grants Scheme
    Open grant
  • 1997
    Collaborative visit to the Swiss Federal Laboratories for Materials Testing & Research in Switzerland.
    UQ Travel Grants Scheme
    Open grant
  • 1997
    Dynamic behaviour of soldering tin alloys and soldered joints
    University of Queensland New Staff Research Grant
    Open grant

Availability

Professor Martin Veidt is:
Not available for supervision

Supervision history

Current supervision

  • Doctor Philosophy

    Development of light weight design and material solutions for tubular structures under severe thermomechanical loads

    Principal Advisor

    Other advisors: Associate Professor Michael Bermingham

  • Doctor Philosophy

    Optimisation of laminated composite tubular structures under thermomechanical loading conditions

    Principal Advisor

    Other advisors: Associate Professor Michael Bermingham

  • Doctor Philosophy

    Development of Smart Orthotics for Remote Australia

    Principal Advisor

    Other advisors: Dr Stuart McDonald

  • Doctor Philosophy

    Optimisation of laminated composite tubular structures under thermomechanical loading conditions

    Principal Advisor

    Other advisors: Associate Professor Michael Bermingham

  • Doctor Philosophy

    Characterisation of Foot Biomechanics through Smart Insole and High Speed Camera

    Principal Advisor

    Other advisors: Dr Stuart McDonald

  • Doctor Philosophy

    Characterisation and optimisation of the fatigue performance of large composite springs for the usage in Wave Energy Converters.

    Associate Advisor

    Other advisors: Dr Milad Bazli, Dr Michael Heitzmann

  • Doctor Philosophy

    Damage Monitoring in Brittle Rocks with Nonlinear Ultrasonic

    Associate Advisor

    Other advisors: Dr Mitch Dunn, Dr Mehdi Serati

  • Doctor Philosophy

    Mechanical and Tribological Performances of Glass Fibre Reinforced Thermoplastics - Investigation into Material Responses, Abrasive Sensitivity and Adverse Operating Conditions

    Associate Advisor

    Other advisors: Associate Professor Karen Steel, Dr Michael Heitzmann

  • Doctor Philosophy

    Automation of Manufacturing Processes for Custom Made Foot Orthotics

    Associate Advisor

  • Doctor Philosophy

    Damage Monitoring in Brittle Rocks with Nonlinear Ultrasonic

    Associate Advisor

    Other advisors: Dr Mehdi Serati, Dr Mitch Dunn

  • Doctor Philosophy

    Characterisation and Optimisation of Large Composite Springs for Wave Energy Converters

    Associate Advisor

    Other advisors: Dr Milad Bazli, Dr Michael Heitzmann

  • Doctor Philosophy

    Development of an acoustofluidic ocular drug delivery platform: Preparations for clinical translation

    Associate Advisor

    Other advisors: Dr Karnaker Reddy Tupally, Dr Harendra Parekh

  • Doctor Philosophy

    Development of all-CMC joining systems

    Associate Advisor

    Other advisors: Dr Michael Heitzmann

  • Doctor Philosophy

    Development of an acoustofluidic ocular drug delivery platform: Preparations for clinical translation

    Associate Advisor

    Other advisors: Dr Karnaker Reddy Tupally, Dr Harendra Parekh

  • Doctor Philosophy

    Automation of Manufacturing Processes for Custom Made Foot Orthotics

    Associate Advisor

Completed supervision

Enquiries

For media enquiries about Professor Martin Veidt's areas of expertise, story ideas and help finding experts, contact our Media team:

communications@uq.edu.au