Professor Martin Veidt
Professor

Martin Veidt

Email: 
Phone: 
+61 7 336 53621

Background

Dr Martin Veidt's research interests are in applied mechanics covering all aspects of through life support of materials and structures with a special focus on composites such as fibre-reinforced laminates, sandwich structures and hybrid metal fibre laminates. This includes quality assurance and quantitative non-destructive evaluation using conventional, guided wave and non-linear ultrasonics; stress analysis and damage mechanics; and experimental determination of mechanical characteristics of materials and interfaces.

He received his Dr sc techn from the Swiss Federal Institute of Technology (ETH) in Zurich in 1991 and his Dipl Masch Ing ETH from there in 1986. His current research projects are in the fields of:

  • Non-linear ultrasonics
  • Ultrasonic manipulation of microbubbles for drug delivery
  • Functional composites
  • Hybrid composite laminates
  • Light weighting

Availability

Professor Martin Veidt is:
Not available for supervision

Fields of research

Engineering Materials engineering

Qualifications

  • Bachelor of Engineering, Swiss Federal Institute of Technology ETH Zürich
  • Doctor of Philosophy, Swiss Federal Institute of Technology ETH Zürich

Research interests

  • Applied Mechanics

  • Nondestructive Evaluation, Ultrasonics, Guided Wave Ultrasonics, Non-linear Ultrasonics

  • Ultrasonic Manipulation of Microbubbles

  • Structural Health Management

  • Composite Materials

  • Light Weighting

  • Damage Modelling

Search Professor Martin Veidt’s works on UQ eSpace

216 works between 1990 and 2024
All (216) Journal Article (100) Book Chapter (5) Conference Publication (109) Other Outputs (1) Edited Outputs (1)

41 - 60 of 216 works

2018

Conference Publication

Numerical investigation of non-collinear guided wave mixing in the case of contact nonlinearity

Blanloeuil, Philippe, Wang, Chun H., Rose, L.R. Francis and Veidt, Martin (2018). Numerical investigation of non-collinear guided wave mixing in the case of contact nonlinearity. 9th European Workshop on Structural Health Monitoring Series (EWSHM 2018), Manchester, United Kingdom, 10-13 July 2018. Bad Breisig, Germany: NDT.net.

Numerical investigation of non-collinear guided wave mixing in the case of contact nonlinearity

2018

Conference Publication

The reliability testing and fatigue behavior study of micro piezoelectric energy harvester

Yang, Y. H., Fu, Y. H., Chen, C. T., Lin, S. C., Shieh, Jay, Veidt, Martin and Wu, W. J. (2018). The reliability testing and fatigue behavior study of micro piezoelectric energy harvester. ASME 2018 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2018, San Antonio, TX, United States, 10-12 September 2018. New York, NY, United States: American Society of Mechanical Engineers (ASME). doi: 10.1115/SMASIS2018-8022

The reliability testing and fatigue behavior study of micro piezoelectric energy harvester

2018

Journal Article

Failure Modes in Hybrid Titanium Composite Laminates

Reiner, Johannes, Veidt, Martin and Dargusch, Matthew (2018). Failure Modes in Hybrid Titanium Composite Laminates. Journal of Engineering Materials and Technology, 140 (1) 011005, 011005. doi: 10.1115/1.4037273

Failure Modes in Hybrid Titanium Composite Laminates

2017

Journal Article

Flexural strength of weathered granites: influence of freeze and thaw cycles

Noor-E-Khuda, Sarkar, Albermani, Faris and Veidt, Martin (2017). Flexural strength of weathered granites: influence of freeze and thaw cycles. Construction and Building Materials, 156, 891-901. doi: 10.1016/j.conbuildmat.2017.09.049

Flexural strength of weathered granites: influence of freeze and thaw cycles

2017

Conference Publication

Honeycomb energy absorbing device for improved falling object protection system in fire fighting tractors

Woodall, N. R. and Veidt, M. (2017). Honeycomb energy absorbing device for improved falling object protection system in fire fighting tractors. 9th Australasian Congress on Applied Mechanics, ACAM 2017, Sydney, NSW Australia, 27-29 November 2017 . Barton, ACT Australia: Engineers Australia.

Honeycomb energy absorbing device for improved falling object protection system in fire fighting tractors

2017

Journal Article

A progressive analysis of matrix cracking-induced delamination in composite laminates using an advanced phantom node method

Reiner, Johannes, Veidt, Martin, Dargusch, Matthew and Gross, Lutz (2017). A progressive analysis of matrix cracking-induced delamination in composite laminates using an advanced phantom node method. Journal of Composite Materials, 51 (20), 2933-2947. doi: 10.1177/0021998316684203

A progressive analysis of matrix cracking-induced delamination in composite laminates using an advanced phantom node method

2017

Journal Article

The mechanical properties of natural fibre composite laminates: a statistical study

Torres, J.,P., Vandi, L .-J., Veidt, M. and Heitzmann, M. T. (2017). The mechanical properties of natural fibre composite laminates: a statistical study. Composites Part A: Applied Science and Manufacturing, 98, 99-104. doi: 10.1016/j.compositesa.2017.03.010

The mechanical properties of natural fibre composite laminates: a statistical study

2017

Journal Article

Statistical data for the tensile properties of natural fibre composites

Torres, J. P., Vandi, L. -J., Veidt, M. and Heiztmann, M. T. (2017). Statistical data for the tensile properties of natural fibre composites. Data in Brief, 12, 222-226. doi: 10.1016/j.dib.2017.03.043

Statistical data for the tensile properties of natural fibre composites

2017

Journal Article

Time reversal invariance for a one-dimensional model of contact acoustic nonlinearity

Blanloeuil, Philippe, Francis Rose, L. R., Veidt, Martin and Wang, Chun H. (2017). Time reversal invariance for a one-dimensional model of contact acoustic nonlinearity. Journal of Sound and Vibration, 394, 515-526. doi: 10.1016/j.jsv.2017.01.050

Time reversal invariance for a one-dimensional model of contact acoustic nonlinearity

2017

Journal Article

A novel top surface analysis method for mode I interface characterisation using digital image correlation

Reiner, Johannes, Torres, Juan Pablo and Veidt, Martin (2017). A novel top surface analysis method for mode I interface characterisation using digital image correlation. Engineering Fracture Mechanics, 173, 107-117. doi: 10.1016/j.engfracmech.2016.12.022

A novel top surface analysis method for mode I interface characterisation using digital image correlation

2017

Journal Article

The hyperelastic and failure behaviors of skin in relation to the dynamic application of microscopic penetrators in a murine model

Meliga, Stefano C., Coffey, Jacob W., Crichton, Michael L., Flaim, Christopher, Veidt, Martin and Kendall, Mark A. F. (2017). The hyperelastic and failure behaviors of skin in relation to the dynamic application of microscopic penetrators in a murine model. Acta Biomaterialia, 48, 341-356. doi: 10.1016/j.actbio.2016.10.021

The hyperelastic and failure behaviors of skin in relation to the dynamic application of microscopic penetrators in a murine model

2017

Conference Publication

Critical aspects of experimental damage detection methodologies using nonlinear vibro-ultrasonics

Dunn, M., Carcione, A., Blanloeuil, P. and Veidt, M. (2017). Critical aspects of experimental damage detection methodologies using nonlinear vibro-ultrasonics. 6th Asia Pacific Workshop on Structural Health Monitoring, APWSHM 2016, Hobart, TAS, Australia, 7 - 9 December 2016. Amsterdam, Netherlands: Elsevier BV. doi: 10.1016/j.proeng.2017.04.466

Critical aspects of experimental damage detection methodologies using nonlinear vibro-ultrasonics

2017

Conference Publication

Nonlinear vibro-acoustic intermodulation to detect weak adhesive bonds

Carcione, A., Maschio, N., Josey, P., Blanloeuil, P. and Veidt, M. (2017). Nonlinear vibro-acoustic intermodulation to detect weak adhesive bonds. 9th Australasian Congress on Applied Mechanics, ACAM 2017, Sydney, NSW Australia, 27-29 November 2017. Barton, ACT Australia: Engineers Australia.

Nonlinear vibro-acoustic intermodulation to detect weak adhesive bonds

2017

Conference Publication

Efficient simulations of the nonlinear wave modulation induced by a closed crack using local contact modelling

Blanloeuil, P., Rose, L. R. F., Wang, C. H. and Veidt, M. (2017). Efficient simulations of the nonlinear wave modulation induced by a closed crack using local contact modelling. 6th Asia Pacific Workshop on Structural Health Monitoring, APWSHM 2016, Hobart, TAS, Australia, 7 - 9 December 2016. Amsterdam, Netherlands: Elsevier BV. doi: 10.1016/j.proeng.2017.04.475

Efficient simulations of the nonlinear wave modulation induced by a closed crack using local contact modelling

2017

Conference Publication

Time reversal invariance and contact acoustic nonlinearity: application for closed crack characterization

Blanloeuil, P., Rose, L. R.F., Wang, C. H. and Veidt, M. (2017). Time reversal invariance and contact acoustic nonlinearity: application for closed crack characterization. 9th Australasian Congress on Applied Mechanics, ACAM 2017, Sydney, Australia, 27-29 November 2017 . Barton, ACT, Australia: Engineers Australia.

Time reversal invariance and contact acoustic nonlinearity: application for closed crack characterization

2016

Journal Article

Closed crack imaging using time reversal method based on fundamental and second harmonic scattering

Blanloeuil, P., Rose, L. R. F., Guinto, J. A., Veidt, M. and Wang, C. H. (2016). Closed crack imaging using time reversal method based on fundamental and second harmonic scattering. Wave Motion, 66, 156-176. doi: 10.1016/j.wavemoti.2016.06.010

Closed crack imaging using time reversal method based on fundamental and second harmonic scattering

2016

Journal Article

Detection of light and vibration modulates bioluminescence intensity in the glowworm, Arachnocampa flava

Mills, Rebecca, Popple, Julie‑Anne, Veidt, Martin and Merritt, David John (2016). Detection of light and vibration modulates bioluminescence intensity in the glowworm, Arachnocampa flava. Journal of Comparative Physiology A: Neuroethology, Sensory, Neural, and Behavioral Physiology, 202 (4), 313-327. doi: 10.1007/s00359-016-1077-0

Detection of light and vibration modulates bioluminescence intensity in the glowworm, Arachnocampa flava

2016

Journal Article

Application of augmented finite element and cohesive zone modelling to predict damage evolution in metal matrix composites and aircraft coatings

Han, Bing, Veidt, Martin, Reiner, Johannes and Dargusch, Matthew S. (2016). Application of augmented finite element and cohesive zone modelling to predict damage evolution in metal matrix composites and aircraft coatings. Journal of Mechanical Engineering Research, 8 (1), 1-17. doi: 10.5897/JMER2015.0377

Application of augmented finite element and cohesive zone modelling to predict damage evolution in metal matrix composites and aircraft coatings

2016

Journal Article

Experimental and numerical analysis of drop-weight low-velocity impact tests on hybrid titanium composite laminates

Reiner, Johannes, Torres, Juan Pablo, Veidt, Martin and Heitzmann, Michael (2016). Experimental and numerical analysis of drop-weight low-velocity impact tests on hybrid titanium composite laminates. Journal of Composite Materials, 50 (26), 3605-3617. doi: 10.1177/0021998315624002

Experimental and numerical analysis of drop-weight low-velocity impact tests on hybrid titanium composite laminates

2016

Conference Publication

Ultrasonic imaging of a crack using modified time reversal

Guinto, Jed, Blanloeuil, Philippe, Wang, Chun W., Rose, Francis and Veidt, Martin (2016). Ultrasonic imaging of a crack using modified time reversal. Australasian Conference on Computational Mechanics, Brisbane, Australia, 1 December 2015. Pfaffikon, Switzerland: Scientific.Net. doi: 10.4028/www.scientific.net/AMM.846.553

Ultrasonic imaging of a crack using modified time reversal

Past funding

  • 2024
    Improving resistance to stress corrosion cracking (SCC) of high-performance aluminim alloys by tailoring alloying elements and microstructure
    Baosteel-Australia Joint Research and Development
    Open grant
  • 2023 - 2024
    Functional composite antenna and radio communications system integration
    Defence Materials Technology Centre
    Open grant
  • 2022 - 2024
    Designed-led advanced manufacturing of smart orthotics for remote Australia (CRC-P administered by iOrthotics)
    iOrthotics Pty Ltd
    Open grant
  • 2021 - 2024
    Industry 4.0 Technical Support (Qld)
    Defence Materials Technology Centre
    Open grant
  • 2020 - 2021
    Non-linear TOFD for the Inspection of Challenging Materials
    Innovation Connections
    Open grant
  • 2020
    Smart Enough Factory Pilot Project
    Defence Materials Technology Centre
    Open grant
  • 2020
    Blue Economy Biofouling Challenges and Possible Solutions
    Blue Economy CRC-Co Ltd
    Open grant
  • 2020
    Review and Optimisation of Dynamic Response Spectroscopy (DRS) Method
    Sonomatic Limited
    Open grant
  • 2019 - 2023
    Functional Antenna Structures
    Defence Materials Technology Centre
    Open grant
  • 2018 - 2023
    Networked FAST Collaboration
    Defence Materials Technology Centre
    Open grant
  • 2018 - 2021
    Nonlinear frequency mixing methods for materials and damage evaluation (ARC Discovery Project administered by the University of New South Wales)
    University of New South Wales
    Open grant
  • 2018 - 2019
    Product innovation project: cascade tyre handler
    Innovation Connections
    Open grant
  • 2018
    Characterisation of epoxy cure kinetics and mechanical performance
    Teakle Composites
    Open grant
  • 2018 - 2019
    The Smart Factory in a Box - IoT Capability Builder
    Defence Materials Technology Centre
    Open grant
  • 2017 - 2020
    Hybrid Composite Materials and Structures
    Defence Materials Technology Centre
    Open grant
  • 2017 - 2018
    Bridging time/size scales in strain measurements with advanced DIC facility (ARC LIEF project administered by The University of Adelaide)
    University of Adelaide
    Open grant
  • 2017 - 2019
    High power density motors incorporating advanced manufacturing methods (CRC - Project led by MagniX)
    Cooperative Research Centre Projects
    Open grant
  • 2016 - 2023
    ARC Research Hub for Advanced Manufacturing of Medical Devices
    ARC Industrial Transformation Research Hubs
    Open grant
  • 2016 - 2017
    High temperature Composite Research in support of the HiFiRE program
    Commonwealth Department of Defence Science and Technology Organisation
    Open grant
  • 2016 - 2017
    Automated fibre braiding facility for multifunctional structural materials (ARC LIEF project administered by RMIT University)
    Royal Melbourne Institute of Technology University
    Open grant
  • 2016
    Investigation of filament winding as an alternative manufacturing route for C/C SCRAM jet combustors
    Commonwealth Defence Science and Technology Group
    Open grant
  • 2016
    Millimetre Waves for Imaging and Sensing
    UQ Major Equipment and Infrastructure
    Open grant
  • 2015 - 2024
    Cross program management
    Defence Materials Technology Centre
    Open grant
  • 2015 - 2018
    Light Weight Material Solutions
    Defence Materials Technology Centre
    Open grant
  • 2015 - 2017
    Baseline-free methods for early damage diagnosis using nonlinear ultrasound (ARC Discovery Project administered by RMIT University)
    University of New South Wales
    Open grant
  • 2015
    Innovating short cycle time manufacturing process for aerospace thermoplastic composites
    UQ Collaboration and Industry Engagement Fund - Seed Research Grant
    Open grant
  • 2014
    MOC - Timothy Cullen (CRC ACS Project 1.1)
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2013 - 2015
    CRC for Advanced Composite Structures Extension Programme: Research Fellow - Dr Blanloeuil
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2013 - 2014
    Performance level structural testing facility
    ARC Linkage Infrastructure, Equipment and Facilities
    Open grant
  • 2013 - 2015
    CRC for Advanced Composite Structures Extension Program - Luigi Vandi
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2012 - 2014
    Towards Autonomous Structural Safety Prognostics: Integrating in-situ Imaging and Predictive Modelling (ARC Discovery Project administered by RMIT)
    Royal Melbourne Institute of Technology University
    Open grant
  • 2011 - 2013
    CRC for Advanced Composite Structures Extension Programme: Research Fellow - Dr Virk
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2011
    CRC for Advanced Composite Structures Extension Program
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2011
    Complete laboratory to semi-industry scale high energy milling and dispersion facility.
    UQ Major Equipment and Infrastructure
    Open grant
  • 2010 - 2011
    CRC for Advanced Composite Structures Extension Program
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2010 - 2013
    CRC for Advanced Composite Structures Extension Program: Research Fellow - Dr Edmund Liew
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2010 - 2015
    Robust Composite Repairs (P3.1)
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2010 - 2015
    Systems Development for Structural Health Monitoring (P3.3)
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2010
    Evaluation of the Flammability, Smoke and Toxicity and Heat Release performance of Castor Plant Composites for Aircraft Cabin Interiors
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2010
    Inspection and repair methods for composite helicopter fuselage structures
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2008 - 2015
    Aircraft prognostic tools to reduce corrosion impacts (DMTC)
    Defence Materials Technology Centre
    Open grant
  • 2008 - 2010
    Research services
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2008 - 2009
    Research services
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2007 - 2008
    Validating a new methodology for the characterisation of structural damage using plate-wave diffraction tomography
    Department Defence - Defence Science & Technology
    Open grant
  • 2007 - 2009
    Tomographic Imaging of Structural Damage in Plates
    ARC Discovery Projects
    Open grant
  • 2005
    Acousto-Ultrasonic Characterisation and Imaging of Structural Damage
    Department Defence - Defence Science & Technology
    Open grant
  • 2004
    Coal Blending for the Production of Metallurgical Coke of High Quality
    UQ FirstLink Scheme
    Open grant
  • 2004
    2004 Travel Scheme Cat 2_Imperial College London; 24/05/04 to 15/06/04
    UQ Travel Grants Scheme
    Open grant
  • 2004 - 2005
    Development and application of a pressure-sensing electropalatograph for the assessment and treatment of speech disorders
    NHMRC Project - Development Grant
    Open grant
  • 2004
    New Frontiers in Structural Health Monitoring
    ARC Seed Funding for Research Networks
    Open grant
  • 2003 - 2004
    Plate Wave Tomography for Reconstruction of Laminar Defects
    ARC Discovery Projects
    Open grant
  • 2002
    Collaborative research with Prof. Hung, City Univ. of Hong Kong, in the area of health monitoring of fibre-reinforced civil infrastructure repair patches.
    UQ Travel Grants Scheme
    Open grant
  • 2002
    Development and application of a pressure-sensing electropalatograph for the assessment and treatment of chron speech disorders
    University of Queensland Research Development Grants Scheme
    Open grant
  • 2002
    Investigating the fluidity of lumbar spine intervetebral discs using MRI and poroeleastic FE modelling
    University of Queensland Research Development Grants Scheme
    Open grant
  • 2001 - 2003
    Inertial response characteristics and energy absorption efficiency of aluminium foam structrual components to medium velocity impacts
    UQ FirstLink Scheme
    Open grant
  • 2000
    Ultrasonic Non-destructive Evaluation for Erosion-Corrosion Quantification.
    ARC Australian Research Council (Small grants)
    Open grant
  • 1999 - 2001
    Studies on a Sensitive Accurate and Reliable Stress Wave Factor Technique for the Assessment of Composite Structures
    ARC Australian Research Council (Large grants)
    Open grant
  • 1999
    Towards an integrated service life assessment system for drill rods
    UQ Early Career Researcher
    Open grant
  • 1999
    Travel scheme for collaborative research by Dr M Veidt at the Ultrasonics Group, Cornell University USA
    UQ Travel Grants Scheme
    Open grant
  • 1997
    Collaborative visit to the Swiss Federal Laboratories for Materials Testing & Research in Switzerland.
    UQ Travel Grants Scheme
    Open grant
  • 1997
    Dynamic behaviour of soldering tin alloys and soldered joints
    University of Queensland New Staff Research Grant
    Open grant

Availability

Professor Martin Veidt is:
Not available for supervision

Supervision history

Current supervision

  • Doctor Philosophy

    Optimisation of laminated composite tubular structures under thermomechanical loading conditions

    Principal Advisor

    Other advisors: Associate Professor Michael Bermingham

  • Doctor Philosophy

    Characterisation of Foot Biomechanics through Smart Insole and High Speed Camera

    Principal Advisor

    Other advisors: Dr Stuart McDonald

  • Doctor Philosophy

    Development of light weight design and material solutions for tubular structures under severe thermomechanical loads

    Principal Advisor

    Other advisors: Associate Professor Michael Bermingham

  • Doctor Philosophy

    Optimisation of laminated composite tubular structures under thermomechanical loading conditions

    Principal Advisor

    Other advisors: Associate Professor Michael Bermingham

  • Doctor Philosophy

    Development of Smart Orthotics for Remote Australia

    Principal Advisor

    Other advisors: Dr Stuart McDonald

  • Doctor Philosophy

    Characterisation and Optimisation of Large Composite Springs for Wave Energy Converters

    Associate Advisor

    Other advisors: Dr Milad Bazli, Dr Michael Heitzmann

  • Doctor Philosophy

    Development of an acoustofluidic ocular drug delivery platform: Preparations for clinical translation

    Associate Advisor

    Other advisors: Dr Karnaker Reddy Tupally, Dr Harendra Parekh

  • Doctor Philosophy

    Development of all-CMC joining systems

    Associate Advisor

    Other advisors: Dr Michael Heitzmann

  • Doctor Philosophy

    Development of an acoustofluidic ocular drug delivery platform: Preparations for clinical translation

    Associate Advisor

    Other advisors: Dr Karnaker Reddy Tupally, Dr Harendra Parekh

  • Doctor Philosophy

    Automation of Manufacturing Processes for Custom Made Foot Orthotics

    Associate Advisor

  • Doctor Philosophy

    Automation of Manufacturing Processes for Custom Made Foot Orthotics

    Associate Advisor

  • Doctor Philosophy

    Characterisation and optimisation of the fatigue performance of large composite springs for the usage in Wave Energy Converters.

    Associate Advisor

    Other advisors: Dr Milad Bazli, Dr Michael Heitzmann

  • Doctor Philosophy

    Damage Monitoring in Brittle Rocks with Nonlinear Ultrasonic

    Associate Advisor

    Other advisors: Dr Mitch Dunn, Dr Mehdi Serati

  • Doctor Philosophy

    Mechanical and Tribological Performances of Glass Fibre Reinforced Thermoplastics - Investigation into Material Responses, Abrasive Sensitivity and Adverse Operating Conditions

    Associate Advisor

    Other advisors: Associate Professor Karen Steel, Dr Michael Heitzmann

  • Doctor Philosophy

    Automation of Manufacturing Processes for Custom Made Foot Orthotics

    Associate Advisor

  • Doctor Philosophy

    Damage Monitoring in Brittle Rocks with Nonlinear Ultrasonic

    Associate Advisor

    Other advisors: Dr Mehdi Serati, Dr Mitch Dunn

Completed supervision

Enquiries

For media enquiries about Professor Martin Veidt's areas of expertise, story ideas and help finding experts, contact our Media team:

communications@uq.edu.au