Professor Martin Veidt
Professor

Martin Veidt

Email: 
Phone: 
+61 7 336 53621

Background

Dr Martin Veidt's research interests are in applied mechanics covering all aspects of through life support of materials and structures with a special focus on composites such as fibre-reinforced laminates, sandwich structures and hybrid metal fibre laminates. This includes quality assurance and quantitative non-destructive evaluation using conventional, guided wave and non-linear ultrasonics; stress analysis and damage mechanics; and experimental determination of mechanical characteristics of materials and interfaces.

He received his Dr sc techn from the Swiss Federal Institute of Technology (ETH) in Zurich in 1991 and his Dipl Masch Ing ETH from there in 1986. His current research projects are in the fields of:

  • Non-linear ultrasonics
  • Ultrasonic manipulation of microbubbles for drug delivery
  • Functional composites
  • Hybrid composite laminates
  • Light weighting

Availability

Professor Martin Veidt is:
Not available for supervision

Fields of research

Engineering Materials engineering

Qualifications

  • Bachelor of Engineering, Swiss Federal Institute of Technology ETH Zürich
  • Doctor of Philosophy, Swiss Federal Institute of Technology ETH Zürich

Research interests

  • Applied Mechanics

  • Nondestructive Evaluation, Ultrasonics, Guided Wave Ultrasonics, Non-linear Ultrasonics

  • Ultrasonic Manipulation of Microbubbles

  • Structural Health Management

  • Composite Materials

  • Light Weighting

  • Damage Modelling

Search Professor Martin Veidt’s works on UQ eSpace

216 works between 1990 and 2024
All (216) Journal Article (100) Book Chapter (5) Conference Publication (109) Other Outputs (1) Edited Outputs (1)

101 - 120 of 216 works

2012

Conference Publication

Investigating mode coupling effects in composite beams with delamination damage

Su, Jiawen, Liew, Chin Kian and Veidt, Martin (2012). Investigating mode coupling effects in composite beams with delamination damage. 7th Australasian Congress on Applied Mechanics (ACAM 7), Adelaide, Australia, 9-12 December 2012. Barton, ACT, Australia: Engineers Australia.

Investigating mode coupling effects in composite beams with delamination damage

2012

Conference Publication

The hyperelastic layered skin characteristics critically affect the penetration of mircoprojection arrays for vaccine delivery

Meliga, S.C., Veidt, Martin, Flaim, C. and Kendall, Mark A. (2012). The hyperelastic layered skin characteristics critically affect the penetration of mircoprojection arrays for vaccine delivery. 1st International Conference on BioNano Innovation (ICBNI), Brisbane Australia, 18-20 July, 2012.

The hyperelastic layered skin characteristics critically affect the penetration of mircoprojection arrays for vaccine delivery

2012

Journal Article

Morphology of an interface between polyetherimide and epoxy prepreg

Heitzmann, Michael T., Hou, Meng, Veidt, Martin, Vandi, Luigi-Jules and Paton, Rowan (2012). Morphology of an interface between polyetherimide and epoxy prepreg. Advanced Materials Research, 393-395, 184-188. doi: 10.4028/www.scientific.net/AMR.393-395.184

Morphology of an interface between polyetherimide and epoxy prepreg

2011

Journal Article

Scattering analysis of fundamental anti-symmetric lamb wave at delaminations in composite laminates

Ng, C. T. and Veidt, M. (2011). Scattering analysis of fundamental anti-symmetric lamb wave at delaminations in composite laminates. Australian Journal of Mechanical Engineering, 8 (2), 197-206. doi: 10.1080/14484846.2011.11464611

Scattering analysis of fundamental anti-symmetric lamb wave at delaminations in composite laminates

2011

Journal Article

Inspections of helicopter composite airframe structures using conventional and emerging nondestructive testing methods

Liew, Chin Kian, Veidt, Martin, Rajic, Nik, Tsoi, Kelly, Rowlands, David and Morton, Howard (2011). Inspections of helicopter composite airframe structures using conventional and emerging nondestructive testing methods. Journal of Testing and Evaluation, 39 (6), 1011-1022. doi: 10.1520/JTE103842

Inspections of helicopter composite airframe structures using conventional and emerging nondestructive testing methods

2011

Journal Article

Influence of nonlinearities on the accuracy of the analytical solution for the shaft loaded blister test

Heitzmann, M.T., Hou, M., Veidt, M. and Falzon, P. (2011). Influence of nonlinearities on the accuracy of the analytical solution for the shaft loaded blister test. International Journal of Solids and Structures, 48 (10), 1424-1435. doi: 10.1016/j.ijsolstr.2011.01.024

Influence of nonlinearities on the accuracy of the analytical solution for the shaft loaded blister test

2011

Journal Article

Influence of stacking sequence on scattering characteristics of the fundamental anti-symmetric Lamb wave at through holes in composite laminates

Veidt, Martin and Ng, Ching-Tai (2011). Influence of stacking sequence on scattering characteristics of the fundamental anti-symmetric Lamb wave at through holes in composite laminates. Journal of the Acoustical Society of America, 129 (3), 1280-1287. doi: 10.1121/1.3533742

Influence of stacking sequence on scattering characteristics of the fundamental anti-symmetric Lamb wave at through holes in composite laminates

2011

Journal Article

Scattering of the fundamental anti-symmetric Lamb wave at delaminations in composite laminates

Ng, Ching-Tai and Veidt, Martin (2011). Scattering of the fundamental anti-symmetric Lamb wave at delaminations in composite laminates. Journal of the Acoustical Society of America, 129 (3), 1288-1296. doi: 10.1121/1.3533741

Scattering of the fundamental anti-symmetric Lamb wave at delaminations in composite laminates

2011

Journal Article

A wavelet-based damage detection approach for acousto-ultrasonic in-situ monitoring systems

Liew, Chin Kian and Veidt, Martin (2011). A wavelet-based damage detection approach for acousto-ultrasonic in-situ monitoring systems. Key Engineering Materials, 472, 809-814. doi: 10.4028/www.scientific.net/KEM.471-472.809

A wavelet-based damage detection approach for acousto-ultrasonic in-situ monitoring systems

2011

Conference Publication

Probabilistic damage characterisation in beams using guided waves

Ng, C.T., Veidt, M. and Lam, H. F. (2011). Probabilistic damage characterisation in beams using guided waves. 12th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC12, Hong Kong, 26-28 January 2011. Amsterdam, The Netherlands: Elsevier BV. doi: 10.1016/j.proeng.2011.07.061

Probabilistic damage characterisation in beams using guided waves

2011

Conference Publication

Experimental measurement and numerical simulation of fundamental anti-symmetric lamb wave scattering in composites

Veidt, M. and Ng, C.T. (2011). Experimental measurement and numerical simulation of fundamental anti-symmetric lamb wave scattering in composites. 37th Annual Review of Progress in Quantitative Nondestructive Evaluation, QNDE, San Diego, CA, 18-23 July 2010. College Park, MD United States: American Institute of Physics. doi: 10.1063/1.3591858

Experimental measurement and numerical simulation of fundamental anti-symmetric lamb wave scattering in composites

2011

Journal Article

Microanalysis techniques for the investigation of interphases formed between thermoset and thermoplastic polymers: Scanning electron microscopy and energy dispersive x-ray analysis

Heitzmann, Michael T., Hou, Meng, Veidt, Martin, Paton, Rowan and Rasch, Ron (2011). Microanalysis techniques for the investigation of interphases formed between thermoset and thermoplastic polymers: Scanning electron microscopy and energy dispersive x-ray analysis. Key Engineering Materials, 471-472, 309-314. doi: 10.4028/www.scientific.net/KEM.471-472.309

Microanalysis techniques for the investigation of interphases formed between thermoset and thermoplastic polymers: Scanning electron microscopy and energy dispersive x-ray analysis

2011

Conference Publication

Measurements of interface fracture strength between fiber-reinforced composite laminates and thin surface films using the blister test

Heitzmann, Michael T., Hou, Meng, Veidt, Martin and Paton, Rowan (2011). Measurements of interface fracture strength between fiber-reinforced composite laminates and thin surface films using the blister test. 8th International Conference on Composite Science and Technology (ICCST8), Kuala Lumpur, Malaysia, 22-24 March 2011. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/KEM.471-472.315

Measurements of interface fracture strength between fiber-reinforced composite laminates and thin surface films using the blister test

2011

Conference Publication

Application of Bayesian approach for damage characterization in beams utilizing guided waves

Ng, C.T., Veidt, M. and Lam, H. F. (2011). Application of Bayesian approach for damage characterization in beams utilizing guided waves. 37th Annual Review of Progress in Quantitative Nondestructive Evaluation, QNDE, San Diego, CA, 18-23 July 2010. College Park, MD United States: American Institute of Physics. doi: 10.1063/1.3591918

Application of Bayesian approach for damage characterization in beams utilizing guided waves

2011

Conference Publication

Damage evaluation in smart materials using time-frequency analysis

Liew, Chin Kian and Veidt, Martin (2011). Damage evaluation in smart materials using time-frequency analysis. 2011 International Conference on Advanced Design and Manufacturing Engineering, ADME 2011, Guangzhou, China, 16 -18 September 2011. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/AMR.311-313.2299

Damage evaluation in smart materials using time-frequency analysis

2011

Conference Publication

Spectral analysis of surface waves for damage detection in layered concrete structures

Willcocks, Mitchell, Veidt, Martin and Palmer, Greg (2011). Spectral analysis of surface waves for damage detection in layered concrete structures. Acoustics 2011: Breaking New Ground, Gold Coast, QLD Australia, 2-4 November 2011. Darlinghurst, NSW Australia: The Australian Acoustical Society.

Spectral analysis of surface waves for damage detection in layered concrete structures

2010

Conference Publication

Scattering analysis of fundamental anti-symmetric Lamb wave at delaminations in composite laminates

Ng, C.T. and Veidt, M. (2010). Scattering analysis of fundamental anti-symmetric Lamb wave at delaminations in composite laminates. 6th Australasian Congress on Applied Mechanics (ACAM 6), Perth, Australia, 12-15 December 2010. Perth, Australia: Engineers Australia.

Scattering analysis of fundamental anti-symmetric Lamb wave at delaminations in composite laminates

2010

Conference Publication

Numeric analysis of the shaft loaded blister test: Influence of nonlinearities on analytic solution

Heitzmann, Michael, Hou, Meng, Veidt, Martin and Falzon, Paul (2010). Numeric analysis of the shaft loaded blister test: Influence of nonlinearities on analytic solution. 6th Australasian Congress on Applied Mechanics (ACAM 6), Perth, Australia, 12-15 December 2010. Perth, Australia: Engineers Australia.

Numeric analysis of the shaft loaded blister test: Influence of nonlinearities on analytic solution

2010

Book Chapter

Review of integrated piezoceramic transducers in smart materials and structures

Liew, Chin Kian and Veidt, Martin (2010). Review of integrated piezoceramic transducers in smart materials and structures. Piezoelectric materials: Structure, properties and applications. (pp. 109-132) edited by Wesley G. Nelson. New York , NY, U.S.A.: Nova Science Publishers.

Review of integrated piezoceramic transducers in smart materials and structures

2010

Conference Publication

Finite element analysis of strain transfer from a mechanically loaded substrate to a surface mounted piezoceramic structural health monitoring transducer

Veidt, Martin, Hou, Meng and Favier, Wayne (2010). Finite element analysis of strain transfer from a mechanically loaded substrate to a surface mounted piezoceramic structural health monitoring transducer. 6th Australasian Congress on Applied Mechanics (ACAM 6), Perth, Australia, 12-15 December 2010. Perth, Australia: Engineers Australia.

Finite element analysis of strain transfer from a mechanically loaded substrate to a surface mounted piezoceramic structural health monitoring transducer

Past funding

  • 2024
    Improving resistance to stress corrosion cracking (SCC) of high-performance aluminim alloys by tailoring alloying elements and microstructure
    Baosteel-Australia Joint Research and Development
    Open grant
  • 2023 - 2024
    Functional composite antenna and radio communications system integration
    Defence Materials Technology Centre
    Open grant
  • 2022 - 2024
    Designed-led advanced manufacturing of smart orthotics for remote Australia (CRC-P administered by iOrthotics)
    iOrthotics Pty Ltd
    Open grant
  • 2021 - 2024
    Industry 4.0 Technical Support (Qld)
    Defence Materials Technology Centre
    Open grant
  • 2020 - 2021
    Non-linear TOFD for the Inspection of Challenging Materials
    Innovation Connections
    Open grant
  • 2020
    Smart Enough Factory Pilot Project
    Defence Materials Technology Centre
    Open grant
  • 2020
    Blue Economy Biofouling Challenges and Possible Solutions
    Blue Economy CRC-Co Ltd
    Open grant
  • 2020
    Review and Optimisation of Dynamic Response Spectroscopy (DRS) Method
    Sonomatic Limited
    Open grant
  • 2019 - 2023
    Functional Antenna Structures
    Defence Materials Technology Centre
    Open grant
  • 2018 - 2023
    Networked FAST Collaboration
    Defence Materials Technology Centre
    Open grant
  • 2018 - 2021
    Nonlinear frequency mixing methods for materials and damage evaluation (ARC Discovery Project administered by the University of New South Wales)
    University of New South Wales
    Open grant
  • 2018 - 2019
    Product innovation project: cascade tyre handler
    Innovation Connections
    Open grant
  • 2018
    Characterisation of epoxy cure kinetics and mechanical performance
    Teakle Composites
    Open grant
  • 2018 - 2019
    The Smart Factory in a Box - IoT Capability Builder
    Defence Materials Technology Centre
    Open grant
  • 2017 - 2020
    Hybrid Composite Materials and Structures
    Defence Materials Technology Centre
    Open grant
  • 2017 - 2018
    Bridging time/size scales in strain measurements with advanced DIC facility (ARC LIEF project administered by The University of Adelaide)
    University of Adelaide
    Open grant
  • 2017 - 2019
    High power density motors incorporating advanced manufacturing methods (CRC - Project led by MagniX)
    Cooperative Research Centre Projects
    Open grant
  • 2016 - 2023
    ARC Research Hub for Advanced Manufacturing of Medical Devices
    ARC Industrial Transformation Research Hubs
    Open grant
  • 2016 - 2017
    High temperature Composite Research in support of the HiFiRE program
    Commonwealth Department of Defence Science and Technology Organisation
    Open grant
  • 2016 - 2017
    Automated fibre braiding facility for multifunctional structural materials (ARC LIEF project administered by RMIT University)
    Royal Melbourne Institute of Technology University
    Open grant
  • 2016
    Investigation of filament winding as an alternative manufacturing route for C/C SCRAM jet combustors
    Commonwealth Defence Science and Technology Group
    Open grant
  • 2016
    Millimetre Waves for Imaging and Sensing
    UQ Major Equipment and Infrastructure
    Open grant
  • 2015 - 2024
    Cross program management
    Defence Materials Technology Centre
    Open grant
  • 2015 - 2018
    Light Weight Material Solutions
    Defence Materials Technology Centre
    Open grant
  • 2015 - 2017
    Baseline-free methods for early damage diagnosis using nonlinear ultrasound (ARC Discovery Project administered by RMIT University)
    University of New South Wales
    Open grant
  • 2015
    Innovating short cycle time manufacturing process for aerospace thermoplastic composites
    UQ Collaboration and Industry Engagement Fund - Seed Research Grant
    Open grant
  • 2014
    MOC - Timothy Cullen (CRC ACS Project 1.1)
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2013 - 2015
    CRC for Advanced Composite Structures Extension Programme: Research Fellow - Dr Blanloeuil
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2013 - 2014
    Performance level structural testing facility
    ARC Linkage Infrastructure, Equipment and Facilities
    Open grant
  • 2013 - 2015
    CRC for Advanced Composite Structures Extension Program - Luigi Vandi
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2012 - 2014
    Towards Autonomous Structural Safety Prognostics: Integrating in-situ Imaging and Predictive Modelling (ARC Discovery Project administered by RMIT)
    Royal Melbourne Institute of Technology University
    Open grant
  • 2011 - 2013
    CRC for Advanced Composite Structures Extension Programme: Research Fellow - Dr Virk
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2011
    CRC for Advanced Composite Structures Extension Program
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2011
    Complete laboratory to semi-industry scale high energy milling and dispersion facility.
    UQ Major Equipment and Infrastructure
    Open grant
  • 2010 - 2011
    CRC for Advanced Composite Structures Extension Program
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2010 - 2013
    CRC for Advanced Composite Structures Extension Program: Research Fellow - Dr Edmund Liew
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2010 - 2015
    Robust Composite Repairs (P3.1)
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2010 - 2015
    Systems Development for Structural Health Monitoring (P3.3)
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2010
    Evaluation of the Flammability, Smoke and Toxicity and Heat Release performance of Castor Plant Composites for Aircraft Cabin Interiors
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2010
    Inspection and repair methods for composite helicopter fuselage structures
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2008 - 2015
    Aircraft prognostic tools to reduce corrosion impacts (DMTC)
    Defence Materials Technology Centre
    Open grant
  • 2008 - 2010
    Research services
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2008 - 2009
    Research services
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2007 - 2008
    Validating a new methodology for the characterisation of structural damage using plate-wave diffraction tomography
    Department Defence - Defence Science & Technology
    Open grant
  • 2007 - 2009
    Tomographic Imaging of Structural Damage in Plates
    ARC Discovery Projects
    Open grant
  • 2005
    Acousto-Ultrasonic Characterisation and Imaging of Structural Damage
    Department Defence - Defence Science & Technology
    Open grant
  • 2004
    Coal Blending for the Production of Metallurgical Coke of High Quality
    UQ FirstLink Scheme
    Open grant
  • 2004
    2004 Travel Scheme Cat 2_Imperial College London; 24/05/04 to 15/06/04
    UQ Travel Grants Scheme
    Open grant
  • 2004 - 2005
    Development and application of a pressure-sensing electropalatograph for the assessment and treatment of speech disorders
    NHMRC Project - Development Grant
    Open grant
  • 2004
    New Frontiers in Structural Health Monitoring
    ARC Seed Funding for Research Networks
    Open grant
  • 2003 - 2004
    Plate Wave Tomography for Reconstruction of Laminar Defects
    ARC Discovery Projects
    Open grant
  • 2002
    Collaborative research with Prof. Hung, City Univ. of Hong Kong, in the area of health monitoring of fibre-reinforced civil infrastructure repair patches.
    UQ Travel Grants Scheme
    Open grant
  • 2002
    Development and application of a pressure-sensing electropalatograph for the assessment and treatment of chron speech disorders
    University of Queensland Research Development Grants Scheme
    Open grant
  • 2002
    Investigating the fluidity of lumbar spine intervetebral discs using MRI and poroeleastic FE modelling
    University of Queensland Research Development Grants Scheme
    Open grant
  • 2001 - 2003
    Inertial response characteristics and energy absorption efficiency of aluminium foam structrual components to medium velocity impacts
    UQ FirstLink Scheme
    Open grant
  • 2000
    Ultrasonic Non-destructive Evaluation for Erosion-Corrosion Quantification.
    ARC Australian Research Council (Small grants)
    Open grant
  • 1999 - 2001
    Studies on a Sensitive Accurate and Reliable Stress Wave Factor Technique for the Assessment of Composite Structures
    ARC Australian Research Council (Large grants)
    Open grant
  • 1999
    Towards an integrated service life assessment system for drill rods
    UQ Early Career Researcher
    Open grant
  • 1999
    Travel scheme for collaborative research by Dr M Veidt at the Ultrasonics Group, Cornell University USA
    UQ Travel Grants Scheme
    Open grant
  • 1997
    Collaborative visit to the Swiss Federal Laboratories for Materials Testing & Research in Switzerland.
    UQ Travel Grants Scheme
    Open grant
  • 1997
    Dynamic behaviour of soldering tin alloys and soldered joints
    University of Queensland New Staff Research Grant
    Open grant

Availability

Professor Martin Veidt is:
Not available for supervision

Supervision history

Current supervision

  • Doctor Philosophy

    Development of light weight design and material solutions for tubular structures under severe thermomechanical loads

    Principal Advisor

    Other advisors: Associate Professor Michael Bermingham

  • Doctor Philosophy

    Optimisation of laminated composite tubular structures under thermomechanical loading conditions

    Principal Advisor

    Other advisors: Associate Professor Michael Bermingham

  • Doctor Philosophy

    Development of Smart Orthotics for Remote Australia

    Principal Advisor

    Other advisors: Dr Stuart McDonald

  • Doctor Philosophy

    Optimisation of laminated composite tubular structures under thermomechanical loading conditions

    Principal Advisor

    Other advisors: Associate Professor Michael Bermingham

  • Doctor Philosophy

    Characterisation of Foot Biomechanics through Smart Insole and High Speed Camera

    Principal Advisor

    Other advisors: Dr Stuart McDonald

  • Doctor Philosophy

    Automation of Manufacturing Processes for Custom Made Foot Orthotics

    Associate Advisor

  • Doctor Philosophy

    Characterisation and optimisation of the fatigue performance of large composite springs for the usage in Wave Energy Converters.

    Associate Advisor

    Other advisors: Dr Milad Bazli, Dr Michael Heitzmann

  • Doctor Philosophy

    Damage Monitoring in Brittle Rocks with Nonlinear Ultrasonic

    Associate Advisor

    Other advisors: Dr Mitch Dunn, Dr Mehdi Serati

  • Doctor Philosophy

    Mechanical and Tribological Performances of Glass Fibre Reinforced Thermoplastics - Investigation into Material Responses, Abrasive Sensitivity and Adverse Operating Conditions

    Associate Advisor

    Other advisors: Associate Professor Karen Steel, Dr Michael Heitzmann

  • Doctor Philosophy

    Automation of Manufacturing Processes for Custom Made Foot Orthotics

    Associate Advisor

  • Doctor Philosophy

    Damage Monitoring in Brittle Rocks with Nonlinear Ultrasonic

    Associate Advisor

    Other advisors: Dr Mehdi Serati, Dr Mitch Dunn

  • Doctor Philosophy

    Characterisation and Optimisation of Large Composite Springs for Wave Energy Converters

    Associate Advisor

    Other advisors: Dr Milad Bazli, Dr Michael Heitzmann

  • Doctor Philosophy

    Development of an acoustofluidic ocular drug delivery platform: Preparations for clinical translation

    Associate Advisor

    Other advisors: Dr Karnaker Reddy Tupally, Dr Harendra Parekh

  • Doctor Philosophy

    Development of all-CMC joining systems

    Associate Advisor

    Other advisors: Dr Michael Heitzmann

  • Doctor Philosophy

    Development of an acoustofluidic ocular drug delivery platform: Preparations for clinical translation

    Associate Advisor

    Other advisors: Dr Karnaker Reddy Tupally, Dr Harendra Parekh

  • Doctor Philosophy

    Automation of Manufacturing Processes for Custom Made Foot Orthotics

    Associate Advisor

Completed supervision

Enquiries

For media enquiries about Professor Martin Veidt's areas of expertise, story ideas and help finding experts, contact our Media team:

communications@uq.edu.au