Professor Martin Veidt
Professor

Martin Veidt

Email: 
Phone: 
+61 7 336 53621

Background

Dr Martin Veidt's research interests are in applied mechanics covering all aspects of through life support of materials and structures with a special focus on composites such as fibre-reinforced laminates, sandwich structures and hybrid metal fibre laminates. This includes quality assurance and quantitative non-destructive evaluation using conventional, guided wave and non-linear ultrasonics; stress analysis and damage mechanics; and experimental determination of mechanical characteristics of materials and interfaces.

He received his Dr sc techn from the Swiss Federal Institute of Technology (ETH) in Zurich in 1991 and his Dipl Masch Ing ETH from there in 1986. His current research projects are in the fields of:

  • Non-linear ultrasonics
  • Ultrasonic manipulation of microbubbles for drug delivery
  • Functional composites
  • Hybrid composite laminates
  • Light weighting

Availability

Professor Martin Veidt is:
Not available for supervision

Fields of research

Engineering Materials engineering

Qualifications

  • Bachelor of Engineering, Swiss Federal Institute of Technology ETH Zürich
  • Doctor of Philosophy, Swiss Federal Institute of Technology ETH Zürich

Research interests

  • Applied Mechanics

  • Nondestructive Evaluation, Ultrasonics, Guided Wave Ultrasonics, Non-linear Ultrasonics

  • Ultrasonic Manipulation of Microbubbles

  • Structural Health Management

  • Composite Materials

  • Light Weighting

  • Damage Modelling

Search Professor Martin Veidt’s works on UQ eSpace

216 works between 1990 and 2024
All (216) Journal Article (100) Book Chapter (5) Conference Publication (109) Other Outputs (1) Edited Outputs (1)

121 - 140 of 216 works

2009

Journal Article

Guided wave damage characterisation in beams utilising probabilistic optimisation

Ng, CT, Veidt, M and Lam, HF (2009). Guided wave damage characterisation in beams utilising probabilistic optimisation. ENGINEERING STRUCTURES, 31 (12), 2842-2850. doi: 10.1016/j.engstruct.2009.07.009

Guided wave damage characterisation in beams utilising probabilistic optimisation

2009

Journal Article

A Lamb-wave-based technique for damage detection in composite laminates

Ng, C. T. and Veidt, M. (2009). A Lamb-wave-based technique for damage detection in composite laminates. Smart Materials and Structures, 18 (7) 074006, 074006.1-074006.12. doi: 10.1088/0964-1726/18/7/074006

A Lamb-wave-based technique for damage detection in composite laminates

2009

Journal Article

Pattern recognition of guided waves for damage evaluation in bars

Liew, Chin Kian and Veidt, Martin (2009). Pattern recognition of guided waves for damage evaluation in bars. Pattern Recognition Letters, 30 (3), 321-330. doi: 10.1016/j.patrec.2008.10.001

Pattern recognition of guided waves for damage evaluation in bars

2009

Conference Publication

Integrated piezoceramic transducers for imaging damage in composite laminates

NG, C.T., Veidt, M. and Rajic, N (2009). Integrated piezoceramic transducers for imaging damage in composite laminates. 2nd International Conference on Smart Materials and Nanotechnology in Engineering, P.R. China, 8-11 July, 2009. P.R. China: SPIE. doi: 10.1117/12.840150

Integrated piezoceramic transducers for imaging damage in composite laminates

2009

Conference Publication

Wavelet analysis of ultrasound for the detection of impact damages in composite laminate structures

Liew, C.K. and Veidt, M. (2009). Wavelet analysis of ultrasound for the detection of impact damages in composite laminate structures. 13th Australian International Aerospace Congress AIAC-13, Melbourne, Australia, 9-12 March 2009.

Wavelet analysis of ultrasound for the detection of impact damages in composite laminate structures

2008

Journal Article

Guided waves damage identification in beams with test pattern dependent series neural network systems

Liew, C. K. and Veidt, M. (2008). Guided waves damage identification in beams with test pattern dependent series neural network systems. W S E A S Transactions on Signal Processing, 4 (4), 86-96.

Guided waves damage identification in beams with test pattern dependent series neural network systems

2008

Journal Article

A computer simulation study of imaging flexural inhomogeneities using plate-wave diffraction tomography

Rohde, A., Veidt, M., Rose, L. R. F. and Homer, J. (2008). A computer simulation study of imaging flexural inhomogeneities using plate-wave diffraction tomography. Ultrasonics, 48 (1), 6-15. doi: 10.1016/j.ultras.2007.09.002

A computer simulation study of imaging flexural inhomogeneities using plate-wave diffraction tomography

2008

Journal Article

Guided waves damage identification in beams with test pattern dependent series neural network systems

Liew, C. K. and Veidt, M. (2008). Guided waves damage identification in beams with test pattern dependent series neural network systems. WSEAS Transactions on Computer Research, 3 (2), 81-90.

Guided waves damage identification in beams with test pattern dependent series neural network systems

2008

Conference Publication

Guided waves damage detection in beams utilising bayesian artifical neural network model class selection

Ng, C.T., Liew, C.K. and Veidt, M. (2008). Guided waves damage detection in beams utilising bayesian artifical neural network model class selection. ICTAM 2008, Adelaide, Australia, 25-29 August 2008. Adelaide, Australia: IUTAM.

Guided waves damage detection in beams utilising bayesian artifical neural network model class selection

2008

Conference Publication

Imaging laminar damage using plate wave ultrasonics and proposed methodology for designing optimal transducer networks

Veidt, M., Rohde, A., Ng, C. T. and Hames, S. (2008). Imaging laminar damage using plate wave ultrasonics and proposed methodology for designing optimal transducer networks. 2nd Asia-Pacific Workshop on Structural Health Monitoring, Melbourne, VIC Australia, 2-4 December 2008. Melbourne, VIC Australia: Institution of Materials Engineering Australasia.

Imaging laminar damage using plate wave ultrasonics and proposed methodology for designing optimal transducer networks

2008

Journal Article

Analytical prediction and experimental measurement for mode conversion and scattering of plate waves at non-symmetric circular blind holes in isotropic plates

Cegla, F. B., Rohde, A. and Veidt, M. (2008). Analytical prediction and experimental measurement for mode conversion and scattering of plate waves at non-symmetric circular blind holes in isotropic plates. Wave Motion, 45 (3), 162-177. doi: 10.1016/j.wavemoti.2007.05.005

Analytical prediction and experimental measurement for mode conversion and scattering of plate waves at non-symmetric circular blind holes in isotropic plates

2008

Conference Publication

An experimental study of plate wave diffraction tomography

Rohde, A. and Veidt, M. (2008). An experimental study of plate wave diffraction tomography. ICTAM 2008, Adelaide, Australia, 25-29 August 2008. Adelaide, Australia: IUTAM.

An experimental study of plate wave diffraction tomography

2008

Conference Publication

Imaging laminar damage in plates using lamb wave beamforming

Veidt, M., Ng, A., Hames, S. and Wattinger, T. (2008). Imaging laminar damage in plates using lamb wave beamforming. Multi-functional Materials and Structures, Hong Kong, 28-31 July 2008. Switzerland: Trans Tech Publishers. doi: 10.4028/www.scientific.net/AMR.47-50.666

Imaging laminar damage in plates using lamb wave beamforming

2008

Conference Publication

Two inversion strategies for plate wave diffraction tomography

Rohde, A., Rose, L. R. F., Veidt, M. and Wang, C. H. (2008). Two inversion strategies for plate wave diffraction tomography. 2nd Asia-Pacific Workshop on Structural Health Monitoring, Melbourne, VIC Australia, 2-4 December 2008. Melbourne, VIC Australia: Institution of Materials Engineering Australasia.

Two inversion strategies for plate wave diffraction tomography

2007

Conference Publication

An efficient measurement strategy for plate wave diffraction tomography

Rohde, A. H. and Veidt, M. (2007). An efficient measurement strategy for plate wave diffraction tomography. doi: 10.1109/ULTSYM.2007.516

An efficient measurement strategy for plate wave diffraction tomography

2007

Conference Publication

Validity of born approximation for plate wave scattering problems

Rohde, A. H. and Veidt, M. (2007). Validity of born approximation for plate wave scattering problems. doi: 10.1109/ULTSYM.2007.285

Validity of born approximation for plate wave scattering problems

2007

Journal Article

Experimental characterization of multiple cracks in a cantilever beam utilizing transient vibration data following a probabilistic approach

Lam, H.F., Ng, C.T. and Veidt, M (2007). Experimental characterization of multiple cracks in a cantilever beam utilizing transient vibration data following a probabilistic approach. Journal of Sound And Vibration, 305 (1-2), 34-49. doi: 10.1016/j.jsv.2007.03.028

Experimental characterization of multiple cracks in a cantilever beam utilizing transient vibration data following a probabilistic approach

2007

Conference Publication

Validity of born approximation for plate wave scattering problems

Rohde, A. and Veidt, M. (2007). Validity of born approximation for plate wave scattering problems. 2007 IEE International Ultrasonics Symposium and Short Courses, New York, United States, 28-31 October 2007. United States: Ultrasonics, Ferrolectrics, and Frequency Control Society.

Validity of born approximation for plate wave scattering problems

2007

Edited Outputs

Proceedings of the Fifth Australasian Congress on Applied Mechanics

Martin Veidt, Faris Albermani, Bill Daniel, John Griffiths, Doug Hargreaves, Ross McAree, Paul Meehan and Andy Tan eds. (2007). Proceedings of the Fifth Australasian Congress on Applied Mechanics. Fifth Australasian Congress on Applied Mechanics (ACAM 2007), Brisbane, Australia, 10–12 December, 2007. Brisbane, Australia: Engineers Australia.

Proceedings of the Fifth Australasian Congress on Applied Mechanics

2007

Conference Publication

Prediction and direct measurement of scattered plate-wave fields using S0 to A0 mode conversion at non-symmetric circular inhomogeneities

Cegla, F.B. and Veidt, M. (2007). Prediction and direct measurement of scattered plate-wave fields using S0 to A0 mode conversion at non-symmetric circular inhomogeneities. Review of Progress in Quantitative Nondestructive Evaluation, Oregon, United Sates, 30 July - 4 August 2006. New York,: american Institute of Physics. doi: 10.1063/1.2717955

Prediction and direct measurement of scattered plate-wave fields using S0 to A0 mode conversion at non-symmetric circular inhomogeneities

Past funding

  • 2024
    Improving resistance to stress corrosion cracking (SCC) of high-performance aluminim alloys by tailoring alloying elements and microstructure
    Baosteel-Australia Joint Research and Development
    Open grant
  • 2023 - 2024
    Functional composite antenna and radio communications system integration
    Defence Materials Technology Centre
    Open grant
  • 2022 - 2024
    Designed-led advanced manufacturing of smart orthotics for remote Australia (CRC-P administered by iOrthotics)
    iOrthotics Pty Ltd
    Open grant
  • 2021 - 2024
    Industry 4.0 Technical Support (Qld)
    Defence Materials Technology Centre
    Open grant
  • 2020 - 2021
    Non-linear TOFD for the Inspection of Challenging Materials
    Innovation Connections
    Open grant
  • 2020
    Smart Enough Factory Pilot Project
    Defence Materials Technology Centre
    Open grant
  • 2020
    Blue Economy Biofouling Challenges and Possible Solutions
    Blue Economy CRC-Co Ltd
    Open grant
  • 2020
    Review and Optimisation of Dynamic Response Spectroscopy (DRS) Method
    Sonomatic Limited
    Open grant
  • 2019 - 2023
    Functional Antenna Structures
    Defence Materials Technology Centre
    Open grant
  • 2018 - 2023
    Networked FAST Collaboration
    Defence Materials Technology Centre
    Open grant
  • 2018 - 2021
    Nonlinear frequency mixing methods for materials and damage evaluation (ARC Discovery Project administered by the University of New South Wales)
    University of New South Wales
    Open grant
  • 2018 - 2019
    Product innovation project: cascade tyre handler
    Innovation Connections
    Open grant
  • 2018
    Characterisation of epoxy cure kinetics and mechanical performance
    Teakle Composites
    Open grant
  • 2018 - 2019
    The Smart Factory in a Box - IoT Capability Builder
    Defence Materials Technology Centre
    Open grant
  • 2017 - 2020
    Hybrid Composite Materials and Structures
    Defence Materials Technology Centre
    Open grant
  • 2017 - 2018
    Bridging time/size scales in strain measurements with advanced DIC facility (ARC LIEF project administered by The University of Adelaide)
    University of Adelaide
    Open grant
  • 2017 - 2019
    High power density motors incorporating advanced manufacturing methods (CRC - Project led by MagniX)
    Cooperative Research Centre Projects
    Open grant
  • 2016 - 2023
    ARC Research Hub for Advanced Manufacturing of Medical Devices
    ARC Industrial Transformation Research Hubs
    Open grant
  • 2016 - 2017
    High temperature Composite Research in support of the HiFiRE program
    Commonwealth Department of Defence Science and Technology Organisation
    Open grant
  • 2016 - 2017
    Automated fibre braiding facility for multifunctional structural materials (ARC LIEF project administered by RMIT University)
    Royal Melbourne Institute of Technology University
    Open grant
  • 2016
    Investigation of filament winding as an alternative manufacturing route for C/C SCRAM jet combustors
    Commonwealth Defence Science and Technology Group
    Open grant
  • 2016
    Millimetre Waves for Imaging and Sensing
    UQ Major Equipment and Infrastructure
    Open grant
  • 2015 - 2024
    Cross program management
    Defence Materials Technology Centre
    Open grant
  • 2015 - 2018
    Light Weight Material Solutions
    Defence Materials Technology Centre
    Open grant
  • 2015 - 2017
    Baseline-free methods for early damage diagnosis using nonlinear ultrasound (ARC Discovery Project administered by RMIT University)
    University of New South Wales
    Open grant
  • 2015
    Innovating short cycle time manufacturing process for aerospace thermoplastic composites
    UQ Collaboration and Industry Engagement Fund - Seed Research Grant
    Open grant
  • 2014
    MOC - Timothy Cullen (CRC ACS Project 1.1)
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2013 - 2015
    CRC for Advanced Composite Structures Extension Programme: Research Fellow - Dr Blanloeuil
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2013 - 2014
    Performance level structural testing facility
    ARC Linkage Infrastructure, Equipment and Facilities
    Open grant
  • 2013 - 2015
    CRC for Advanced Composite Structures Extension Program - Luigi Vandi
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2012 - 2014
    Towards Autonomous Structural Safety Prognostics: Integrating in-situ Imaging and Predictive Modelling (ARC Discovery Project administered by RMIT)
    Royal Melbourne Institute of Technology University
    Open grant
  • 2011 - 2013
    CRC for Advanced Composite Structures Extension Programme: Research Fellow - Dr Virk
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2011
    CRC for Advanced Composite Structures Extension Program
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2011
    Complete laboratory to semi-industry scale high energy milling and dispersion facility.
    UQ Major Equipment and Infrastructure
    Open grant
  • 2010 - 2011
    CRC for Advanced Composite Structures Extension Program
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2010 - 2013
    CRC for Advanced Composite Structures Extension Program: Research Fellow - Dr Edmund Liew
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2010 - 2015
    Robust Composite Repairs (P3.1)
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2010 - 2015
    Systems Development for Structural Health Monitoring (P3.3)
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2010
    Evaluation of the Flammability, Smoke and Toxicity and Heat Release performance of Castor Plant Composites for Aircraft Cabin Interiors
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2010
    Inspection and repair methods for composite helicopter fuselage structures
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2008 - 2015
    Aircraft prognostic tools to reduce corrosion impacts (DMTC)
    Defence Materials Technology Centre
    Open grant
  • 2008 - 2010
    Research services
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2008 - 2009
    Research services
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2007 - 2008
    Validating a new methodology for the characterisation of structural damage using plate-wave diffraction tomography
    Department Defence - Defence Science & Technology
    Open grant
  • 2007 - 2009
    Tomographic Imaging of Structural Damage in Plates
    ARC Discovery Projects
    Open grant
  • 2005
    Acousto-Ultrasonic Characterisation and Imaging of Structural Damage
    Department Defence - Defence Science & Technology
    Open grant
  • 2004
    Coal Blending for the Production of Metallurgical Coke of High Quality
    UQ FirstLink Scheme
    Open grant
  • 2004
    2004 Travel Scheme Cat 2_Imperial College London; 24/05/04 to 15/06/04
    UQ Travel Grants Scheme
    Open grant
  • 2004 - 2005
    Development and application of a pressure-sensing electropalatograph for the assessment and treatment of speech disorders
    NHMRC Project - Development Grant
    Open grant
  • 2004
    New Frontiers in Structural Health Monitoring
    ARC Seed Funding for Research Networks
    Open grant
  • 2003 - 2004
    Plate Wave Tomography for Reconstruction of Laminar Defects
    ARC Discovery Projects
    Open grant
  • 2002
    Collaborative research with Prof. Hung, City Univ. of Hong Kong, in the area of health monitoring of fibre-reinforced civil infrastructure repair patches.
    UQ Travel Grants Scheme
    Open grant
  • 2002
    Development and application of a pressure-sensing electropalatograph for the assessment and treatment of chron speech disorders
    University of Queensland Research Development Grants Scheme
    Open grant
  • 2002
    Investigating the fluidity of lumbar spine intervetebral discs using MRI and poroeleastic FE modelling
    University of Queensland Research Development Grants Scheme
    Open grant
  • 2001 - 2003
    Inertial response characteristics and energy absorption efficiency of aluminium foam structrual components to medium velocity impacts
    UQ FirstLink Scheme
    Open grant
  • 2000
    Ultrasonic Non-destructive Evaluation for Erosion-Corrosion Quantification.
    ARC Australian Research Council (Small grants)
    Open grant
  • 1999 - 2001
    Studies on a Sensitive Accurate and Reliable Stress Wave Factor Technique for the Assessment of Composite Structures
    ARC Australian Research Council (Large grants)
    Open grant
  • 1999
    Towards an integrated service life assessment system for drill rods
    UQ Early Career Researcher
    Open grant
  • 1999
    Travel scheme for collaborative research by Dr M Veidt at the Ultrasonics Group, Cornell University USA
    UQ Travel Grants Scheme
    Open grant
  • 1997
    Collaborative visit to the Swiss Federal Laboratories for Materials Testing & Research in Switzerland.
    UQ Travel Grants Scheme
    Open grant
  • 1997
    Dynamic behaviour of soldering tin alloys and soldered joints
    University of Queensland New Staff Research Grant
    Open grant

Availability

Professor Martin Veidt is:
Not available for supervision

Supervision history

Current supervision

  • Doctor Philosophy

    Development of Smart Orthotics for Remote Australia

    Principal Advisor

    Other advisors: Dr Stuart McDonald

  • Doctor Philosophy

    Optimisation of laminated composite tubular structures under thermomechanical loading conditions

    Principal Advisor

    Other advisors: Associate Professor Michael Bermingham

  • Doctor Philosophy

    Characterisation of Foot Biomechanics through Smart Insole and High Speed Camera

    Principal Advisor

    Other advisors: Dr Stuart McDonald

  • Doctor Philosophy

    Development of light weight design and material solutions for tubular structures under severe thermomechanical loads

    Principal Advisor

    Other advisors: Associate Professor Michael Bermingham

  • Doctor Philosophy

    Optimisation of laminated composite tubular structures under thermomechanical loading conditions

    Principal Advisor

    Other advisors: Associate Professor Michael Bermingham

  • Doctor Philosophy

    Development of an acoustofluidic ocular drug delivery platform: Preparations for clinical translation

    Associate Advisor

    Other advisors: Dr Karnaker Reddy Tupally, Dr Harendra Parekh

  • Doctor Philosophy

    Automation of Manufacturing Processes for Custom Made Foot Orthotics

    Associate Advisor

  • Doctor Philosophy

    Automation of Manufacturing Processes for Custom Made Foot Orthotics

    Associate Advisor

  • Doctor Philosophy

    Characterisation and optimisation of the fatigue performance of large composite springs for the usage in Wave Energy Converters.

    Associate Advisor

    Other advisors: Dr Milad Bazli, Dr Michael Heitzmann

  • Doctor Philosophy

    Damage Monitoring in Brittle Rocks with Nonlinear Ultrasonic

    Associate Advisor

    Other advisors: Dr Mitch Dunn, Dr Mehdi Serati

  • Doctor Philosophy

    Mechanical and Tribological Performances of Glass Fibre Reinforced Thermoplastics - Investigation into Material Responses, Abrasive Sensitivity and Adverse Operating Conditions

    Associate Advisor

    Other advisors: Associate Professor Karen Steel, Dr Michael Heitzmann

  • Doctor Philosophy

    Automation of Manufacturing Processes for Custom Made Foot Orthotics

    Associate Advisor

  • Doctor Philosophy

    Damage Monitoring in Brittle Rocks with Nonlinear Ultrasonic

    Associate Advisor

    Other advisors: Dr Mehdi Serati, Dr Mitch Dunn

  • Doctor Philosophy

    Characterisation and Optimisation of Large Composite Springs for Wave Energy Converters

    Associate Advisor

    Other advisors: Dr Milad Bazli, Dr Michael Heitzmann

  • Doctor Philosophy

    Development of an acoustofluidic ocular drug delivery platform: Preparations for clinical translation

    Associate Advisor

    Other advisors: Dr Karnaker Reddy Tupally, Dr Harendra Parekh

  • Doctor Philosophy

    Development of all-CMC joining systems

    Associate Advisor

    Other advisors: Dr Michael Heitzmann

Completed supervision

Enquiries

For media enquiries about Professor Martin Veidt's areas of expertise, story ideas and help finding experts, contact our Media team:

communications@uq.edu.au