Professor Martin Veidt
Professor

Martin Veidt

Email: 
Phone: 
+61 7 336 53621

Background

Dr Martin Veidt's research interests are in applied mechanics covering all aspects of through life support of materials and structures with a special focus on composites such as fibre-reinforced laminates, sandwich structures and hybrid metal fibre laminates. This includes quality assurance and quantitative non-destructive evaluation using conventional, guided wave and non-linear ultrasonics; stress analysis and damage mechanics; and experimental determination of mechanical characteristics of materials and interfaces.

He received his Dr sc techn from the Swiss Federal Institute of Technology (ETH) in Zurich in 1991 and his Dipl Masch Ing ETH from there in 1986. His current research projects are in the fields of:

  • Non-linear ultrasonics
  • Ultrasonic manipulation of microbubbles for drug delivery
  • Functional composites
  • Hybrid composite laminates
  • Light weighting

Availability

Professor Martin Veidt is:
Not available for supervision

Fields of research

Engineering Materials engineering

Qualifications

  • Bachelor of Engineering, Swiss Federal Institute of Technology ETH Zürich
  • Doctor of Philosophy, Swiss Federal Institute of Technology ETH Zürich

Research interests

  • Applied Mechanics

  • Nondestructive Evaluation, Ultrasonics, Guided Wave Ultrasonics, Non-linear Ultrasonics

  • Ultrasonic Manipulation of Microbubbles

  • Structural Health Management

  • Composite Materials

  • Light Weighting

  • Damage Modelling

Search Professor Martin Veidt’s works on UQ eSpace

216 works between 1990 and 2024
All (216) Journal Article (100) Book Chapter (5) Conference Publication (109) Other Outputs (1) Edited Outputs (1)

141 - 160 of 216 works

2007

Conference Publication

Experimental study of multiple cracks detection utilizing a probabilistic approach

Ng, C. T., Veidt, M. and Lam, H. F. (2007). Experimental study of multiple cracks detection utilizing a probabilistic approach. 5th Australasian Congress on Applied Mechanics (ACAM 2007), Brisbane, Australia, 10-12 December, 2007. Brisbane, Australia: Engineers Australia.

Experimental study of multiple cracks detection utilizing a probabilistic approach

2007

Journal Article

Test-rig has loads of potential

Belfield S. and Veidt M. (2007). Test-rig has loads of potential. Australian Mining, 99 (10), 46-47.

Test-rig has loads of potential

2007

Conference Publication

Optimization of neural network pattern recognition systems for guided waves damage identification in beams

Liew, C. K. and Veidt, M. (2007). Optimization of neural network pattern recognition systems for guided waves damage identification in beams. Review of Progress in Quantitative Nondestructive Evaluation, Oregon, United Sates, 30 July - 4 August 2006. New York,: american Institute of Physics. doi: 10.1063/1.2718029

Optimization of neural network pattern recognition systems for guided waves damage identification in beams

2007

Conference Publication

Validity of born approximation for plate wave scattering problems

Rohde, A. and Veidt, M. (2007). Validity of born approximation for plate wave scattering problems. 2007 IEE International Ultrasonics Symposium and Short Courses, New York, United States, 28-31 October 2007. United States: Ultrasonics, Ferrolectrics, and Frequency Control Society.

Validity of born approximation for plate wave scattering problems

2007

Edited Outputs

Proceedings of the Fifth Australasian Congress on Applied Mechanics

Martin Veidt, Faris Albermani, Bill Daniel, John Griffiths, Doug Hargreaves, Ross McAree, Paul Meehan and Andy Tan eds. (2007). Proceedings of the Fifth Australasian Congress on Applied Mechanics. Fifth Australasian Congress on Applied Mechanics (ACAM 2007), Brisbane, Australia, 10–12 December, 2007. Brisbane, Australia: Engineers Australia.

Proceedings of the Fifth Australasian Congress on Applied Mechanics

2007

Conference Publication

Prediction and direct measurement of scattered plate-wave fields using S0 to A0 mode conversion at non-symmetric circular inhomogeneities

Cegla, F.B. and Veidt, M. (2007). Prediction and direct measurement of scattered plate-wave fields using S0 to A0 mode conversion at non-symmetric circular inhomogeneities. Review of Progress in Quantitative Nondestructive Evaluation, Oregon, United Sates, 30 July - 4 August 2006. New York,: american Institute of Physics. doi: 10.1063/1.2717955

Prediction and direct measurement of scattered plate-wave fields using S0 to A0 mode conversion at non-symmetric circular inhomogeneities

2007

Conference Publication

An efficient measurement strategy for plate wave diffraction tomography

Rohde, A. and Veidt, M. (2007). An efficient measurement strategy for plate wave diffraction tomography. 2007 IEE International Ultrasonics Symposium and Short Courses, New York, United States, 28-31 October 2007. United States: Ultrasonics, Ferrolectrics, and Frequency Control Society.

An efficient measurement strategy for plate wave diffraction tomography

2007

Conference Publication

Metal-polymer functionally graded materials for removing guided wave reflections at beam end boundaries

Liew, C. K., Veidt, M., Chavara, D. T., Ruys, A. J., Young, C. and McCreery, M. (2007). Metal-polymer functionally graded materials for removing guided wave reflections at beam end boundaries. 5th Australasian Congress on Applied Mechanics (ACAM 2007), Brisbane, Australia, 10-12 December, 2007. Brisbane: Engineers Australia.

Metal-polymer functionally graded materials for removing guided wave reflections at beam end boundaries

2006

Journal Article

Protective Iron Carbonate Films—Part 2: Chemical Removal by Dissolution in Single-Phase Aqueous Flow

Ruzic, V., Veidt, M. and Nesic, S. (2006). Protective Iron Carbonate Films—Part 2: Chemical Removal by Dissolution in Single-Phase Aqueous Flow. Corrosion, 62 (7), 598-611. doi: 10.5006/1.3280674

Protective Iron Carbonate Films—Part 2: Chemical Removal by Dissolution in Single-Phase Aqueous Flow

2006

Journal Article

Removal of protective iron carbonate films in single phase flow accelerated corrosion of mild steel: Part 1: mechanical removal in single-phase aqueous flow

Ruzic, V., Veidt, M. and Nesic, S. (2006). Removal of protective iron carbonate films in single phase flow accelerated corrosion of mild steel: Part 1: mechanical removal in single-phase aqueous flow. Corrosion, 62 (5), 419-432. doi: 10.5006/1.3278279

Removal of protective iron carbonate films in single phase flow accelerated corrosion of mild steel: Part 1: mechanical removal in single-phase aqueous flow

2005

Conference Publication

Application of coupled vibration on detection of fatigue cracks in welded structures

Liu, D., Gurgenci, H. and Veidt, M. (2005). Application of coupled vibration on detection of fatigue cracks in welded structures.

Application of coupled vibration on detection of fatigue cracks in welded structures

2005

Journal Article

An experimental and finite element poroelastic creep response analysis of an intervertebral hydrogel disc model in axial compression

Silva, P., Crozier, S., Veidt, M. and Pearcy, M. J. (2005). An experimental and finite element poroelastic creep response analysis of an intervertebral hydrogel disc model in axial compression. Journal of Materials Science: Materials in Medicine, 16 (7), 663-669. doi: 10.1007/s10856-005-2538-0

An experimental and finite element poroelastic creep response analysis of an intervertebral hydrogel disc model in axial compression

2005

Conference Publication

Flexural wave scattering at laminar defects in thin plates

Rohde, A. and Veidt, M. (2005). Flexural wave scattering at laminar defects in thin plates. The Fourth Australasian Congress on Applied Mechanics, Melbourne, VIC, Australia, 16-18 February 2005. North Melbourne, VIC, Australia: Institute of Materials Engineering Australasia.

Flexural wave scattering at laminar defects in thin plates

2005

Conference Publication

Assessment of tongue-to-plate pressure-sensing electropalatograph system in dysarthric speech using a newly developed pressure-sensing electropalatograph system

Murdoch, Bruce E., Goozee, Justine V., Veidt, Martin, Scott, Dion H., Meyers, Ian A. and Seow, Naomi (2005). Assessment of tongue-to-plate pressure-sensing electropalatograph system in dysarthric speech using a newly developed pressure-sensing electropalatograph system. 4th International EPG Symposium, Edinburgh, 29th - 30th September, 2005.

Assessment of tongue-to-plate pressure-sensing electropalatograph system in dysarthric speech using a newly developed pressure-sensing electropalatograph system

2005

Conference Publication

Flexural wave scattering at laminar defects in plates

Rohde, A. H. and Carrick, F. N. (2005). Flexural wave scattering at laminar defects in plates. The Fourth Australasian Congress on Applied Mechanics, Melbourne, Australia, 16-18 February 2005. North Melbourne, Australia: Institute of Materials Engineering Australasia.

Flexural wave scattering at laminar defects in plates

2005

Conference Publication

Mechanisms of protective FeCO3 film removal in single-phase flow-accelerated CO2 corrosion of mild steel

Ruzic, V., Veidt, M. and Nesic, S. (2005). Mechanisms of protective FeCO3 film removal in single-phase flow-accelerated CO2 corrosion of mild steel. Corrosion and Prevention 2005, Gold Coast, Qld., 20-24 November, 2005. Mt Waverly, Vic: Australasian Corrosion Association (ACA).

Mechanisms of protective FeCO3 film removal in single-phase flow-accelerated CO2 corrosion of mild steel

2005

Conference Publication

Evaluation of Laminar Defects in Beams Using Guided Waves and Pattern Recognition Techniques

Liew, C. K. and Veidt, M. (2005). Evaluation of Laminar Defects in Beams Using Guided Waves and Pattern Recognition Techniques. 1st International Conference on Structural Condition Assessment, Monitoring and Improvement, Perth, Western Australia, 12-14 December, 2005. Singapore: CI-Premier Conference Organisation.

Evaluation of Laminar Defects in Beams Using Guided Waves and Pattern Recognition Techniques

2005

Conference Publication

Application of coupled vibration on detection of fatigue cracks in welded structures

Liu, D., Gurgenci, H. and Veidt, M. (2005). Application of coupled vibration on detection of fatigue cracks in welded structures. The Fourth Australasian Congress on Applied Mechanics, Melbourne, Australia, 16-18 February 2005. Melbourne, Australia: Institute of Materials Engineering Australasia.

Application of coupled vibration on detection of fatigue cracks in welded structures

2004

Journal Article

Introducing the pressure-sensing palatograph - the next frontier in electropalatography

Murdoch, Bruce E., Goozee, Justine V., Veidt, Martin, Scott, Dion H. and Meyers, Ian A. (2004). Introducing the pressure-sensing palatograph - the next frontier in electropalatography. Clinical Linguistics & Phonetics, 18 (6-8), 433-445. doi: 10.1080/02699200410001703628

Introducing the pressure-sensing palatograph - the next frontier in electropalatography

2004

Conference Publication

Crack detection in welded mechanical structures using coupled vibrations

Liu, D., Gurgenci, S. H. and Veidt, M. (2004). Crack detection in welded mechanical structures using coupled vibrations.

Crack detection in welded mechanical structures using coupled vibrations

Past funding

  • 2024
    Improving resistance to stress corrosion cracking (SCC) of high-performance aluminim alloys by tailoring alloying elements and microstructure
    Baosteel-Australia Joint Research and Development
    Open grant
  • 2023 - 2024
    Functional composite antenna and radio communications system integration
    Defence Materials Technology Centre
    Open grant
  • 2022 - 2024
    Designed-led advanced manufacturing of smart orthotics for remote Australia (CRC-P administered by iOrthotics)
    iOrthotics Pty Ltd
    Open grant
  • 2021 - 2024
    Industry 4.0 Technical Support (Qld)
    Defence Materials Technology Centre
    Open grant
  • 2020 - 2021
    Non-linear TOFD for the Inspection of Challenging Materials
    Innovation Connections
    Open grant
  • 2020
    Smart Enough Factory Pilot Project
    Defence Materials Technology Centre
    Open grant
  • 2020
    Blue Economy Biofouling Challenges and Possible Solutions
    Blue Economy CRC-Co Ltd
    Open grant
  • 2020
    Review and Optimisation of Dynamic Response Spectroscopy (DRS) Method
    Sonomatic Limited
    Open grant
  • 2019 - 2023
    Functional Antenna Structures
    Defence Materials Technology Centre
    Open grant
  • 2018 - 2023
    Networked FAST Collaboration
    Defence Materials Technology Centre
    Open grant
  • 2018 - 2021
    Nonlinear frequency mixing methods for materials and damage evaluation (ARC Discovery Project administered by the University of New South Wales)
    University of New South Wales
    Open grant
  • 2018 - 2019
    Product innovation project: cascade tyre handler
    Innovation Connections
    Open grant
  • 2018
    Characterisation of epoxy cure kinetics and mechanical performance
    Teakle Composites
    Open grant
  • 2018 - 2019
    The Smart Factory in a Box - IoT Capability Builder
    Defence Materials Technology Centre
    Open grant
  • 2017 - 2020
    Hybrid Composite Materials and Structures
    Defence Materials Technology Centre
    Open grant
  • 2017 - 2018
    Bridging time/size scales in strain measurements with advanced DIC facility (ARC LIEF project administered by The University of Adelaide)
    University of Adelaide
    Open grant
  • 2017 - 2019
    High power density motors incorporating advanced manufacturing methods (CRC - Project led by MagniX)
    Cooperative Research Centre Projects
    Open grant
  • 2016 - 2023
    ARC Research Hub for Advanced Manufacturing of Medical Devices
    ARC Industrial Transformation Research Hubs
    Open grant
  • 2016 - 2017
    High temperature Composite Research in support of the HiFiRE program
    Commonwealth Department of Defence Science and Technology Organisation
    Open grant
  • 2016 - 2017
    Automated fibre braiding facility for multifunctional structural materials (ARC LIEF project administered by RMIT University)
    Royal Melbourne Institute of Technology University
    Open grant
  • 2016
    Investigation of filament winding as an alternative manufacturing route for C/C SCRAM jet combustors
    Commonwealth Defence Science and Technology Group
    Open grant
  • 2016
    Millimetre Waves for Imaging and Sensing
    UQ Major Equipment and Infrastructure
    Open grant
  • 2015 - 2024
    Cross program management
    Defence Materials Technology Centre
    Open grant
  • 2015 - 2018
    Light Weight Material Solutions
    Defence Materials Technology Centre
    Open grant
  • 2015 - 2017
    Baseline-free methods for early damage diagnosis using nonlinear ultrasound (ARC Discovery Project administered by RMIT University)
    University of New South Wales
    Open grant
  • 2015
    Innovating short cycle time manufacturing process for aerospace thermoplastic composites
    UQ Collaboration and Industry Engagement Fund - Seed Research Grant
    Open grant
  • 2014
    MOC - Timothy Cullen (CRC ACS Project 1.1)
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2013 - 2015
    CRC for Advanced Composite Structures Extension Programme: Research Fellow - Dr Blanloeuil
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2013 - 2014
    Performance level structural testing facility
    ARC Linkage Infrastructure, Equipment and Facilities
    Open grant
  • 2013 - 2015
    CRC for Advanced Composite Structures Extension Program - Luigi Vandi
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2012 - 2014
    Towards Autonomous Structural Safety Prognostics: Integrating in-situ Imaging and Predictive Modelling (ARC Discovery Project administered by RMIT)
    Royal Melbourne Institute of Technology University
    Open grant
  • 2011 - 2013
    CRC for Advanced Composite Structures Extension Programme: Research Fellow - Dr Virk
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2011
    CRC for Advanced Composite Structures Extension Program
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2011
    Complete laboratory to semi-industry scale high energy milling and dispersion facility.
    UQ Major Equipment and Infrastructure
    Open grant
  • 2010 - 2011
    CRC for Advanced Composite Structures Extension Program
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2010 - 2013
    CRC for Advanced Composite Structures Extension Program: Research Fellow - Dr Edmund Liew
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2010 - 2015
    Robust Composite Repairs (P3.1)
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2010 - 2015
    Systems Development for Structural Health Monitoring (P3.3)
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2010
    Evaluation of the Flammability, Smoke and Toxicity and Heat Release performance of Castor Plant Composites for Aircraft Cabin Interiors
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2010
    Inspection and repair methods for composite helicopter fuselage structures
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2008 - 2015
    Aircraft prognostic tools to reduce corrosion impacts (DMTC)
    Defence Materials Technology Centre
    Open grant
  • 2008 - 2010
    Research services
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2008 - 2009
    Research services
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2007 - 2008
    Validating a new methodology for the characterisation of structural damage using plate-wave diffraction tomography
    Department Defence - Defence Science & Technology
    Open grant
  • 2007 - 2009
    Tomographic Imaging of Structural Damage in Plates
    ARC Discovery Projects
    Open grant
  • 2005
    Acousto-Ultrasonic Characterisation and Imaging of Structural Damage
    Department Defence - Defence Science & Technology
    Open grant
  • 2004
    Coal Blending for the Production of Metallurgical Coke of High Quality
    UQ FirstLink Scheme
    Open grant
  • 2004
    2004 Travel Scheme Cat 2_Imperial College London; 24/05/04 to 15/06/04
    UQ Travel Grants Scheme
    Open grant
  • 2004 - 2005
    Development and application of a pressure-sensing electropalatograph for the assessment and treatment of speech disorders
    NHMRC Project - Development Grant
    Open grant
  • 2004
    New Frontiers in Structural Health Monitoring
    ARC Seed Funding for Research Networks
    Open grant
  • 2003 - 2004
    Plate Wave Tomography for Reconstruction of Laminar Defects
    ARC Discovery Projects
    Open grant
  • 2002
    Collaborative research with Prof. Hung, City Univ. of Hong Kong, in the area of health monitoring of fibre-reinforced civil infrastructure repair patches.
    UQ Travel Grants Scheme
    Open grant
  • 2002
    Development and application of a pressure-sensing electropalatograph for the assessment and treatment of chron speech disorders
    University of Queensland Research Development Grants Scheme
    Open grant
  • 2002
    Investigating the fluidity of lumbar spine intervetebral discs using MRI and poroeleastic FE modelling
    University of Queensland Research Development Grants Scheme
    Open grant
  • 2001 - 2003
    Inertial response characteristics and energy absorption efficiency of aluminium foam structrual components to medium velocity impacts
    UQ FirstLink Scheme
    Open grant
  • 2000
    Ultrasonic Non-destructive Evaluation for Erosion-Corrosion Quantification.
    ARC Australian Research Council (Small grants)
    Open grant
  • 1999 - 2001
    Studies on a Sensitive Accurate and Reliable Stress Wave Factor Technique for the Assessment of Composite Structures
    ARC Australian Research Council (Large grants)
    Open grant
  • 1999
    Towards an integrated service life assessment system for drill rods
    UQ Early Career Researcher
    Open grant
  • 1999
    Travel scheme for collaborative research by Dr M Veidt at the Ultrasonics Group, Cornell University USA
    UQ Travel Grants Scheme
    Open grant
  • 1997
    Collaborative visit to the Swiss Federal Laboratories for Materials Testing & Research in Switzerland.
    UQ Travel Grants Scheme
    Open grant
  • 1997
    Dynamic behaviour of soldering tin alloys and soldered joints
    University of Queensland New Staff Research Grant
    Open grant

Availability

Professor Martin Veidt is:
Not available for supervision

Supervision history

Current supervision

  • Doctor Philosophy

    Optimisation of laminated composite tubular structures under thermomechanical loading conditions

    Principal Advisor

    Other advisors: Associate Professor Michael Bermingham

  • Doctor Philosophy

    Characterisation of Foot Biomechanics through Smart Insole and High Speed Camera

    Principal Advisor

    Other advisors: Dr Stuart McDonald

  • Doctor Philosophy

    Development of light weight design and material solutions for tubular structures under severe thermomechanical loads

    Principal Advisor

    Other advisors: Associate Professor Michael Bermingham

  • Doctor Philosophy

    Optimisation of laminated composite tubular structures under thermomechanical loading conditions

    Principal Advisor

    Other advisors: Associate Professor Michael Bermingham

  • Doctor Philosophy

    Development of Smart Orthotics for Remote Australia

    Principal Advisor

    Other advisors: Dr Stuart McDonald

  • Doctor Philosophy

    Characterisation and Optimisation of Large Composite Springs for Wave Energy Converters

    Associate Advisor

    Other advisors: Dr Milad Bazli, Dr Michael Heitzmann

  • Doctor Philosophy

    Development of an acoustofluidic ocular drug delivery platform: Preparations for clinical translation

    Associate Advisor

    Other advisors: Dr Karnaker Reddy Tupally, Dr Harendra Parekh

  • Doctor Philosophy

    Development of all-CMC joining systems

    Associate Advisor

    Other advisors: Dr Michael Heitzmann

  • Doctor Philosophy

    Development of an acoustofluidic ocular drug delivery platform: Preparations for clinical translation

    Associate Advisor

    Other advisors: Dr Karnaker Reddy Tupally, Dr Harendra Parekh

  • Doctor Philosophy

    Automation of Manufacturing Processes for Custom Made Foot Orthotics

    Associate Advisor

  • Doctor Philosophy

    Automation of Manufacturing Processes for Custom Made Foot Orthotics

    Associate Advisor

  • Doctor Philosophy

    Characterisation and optimisation of the fatigue performance of large composite springs for the usage in Wave Energy Converters.

    Associate Advisor

    Other advisors: Dr Milad Bazli, Dr Michael Heitzmann

  • Doctor Philosophy

    Damage Monitoring in Brittle Rocks with Nonlinear Ultrasonic

    Associate Advisor

    Other advisors: Dr Mitch Dunn, Dr Mehdi Serati

  • Doctor Philosophy

    Mechanical and Tribological Performances of Glass Fibre Reinforced Thermoplastics - Investigation into Material Responses, Abrasive Sensitivity and Adverse Operating Conditions

    Associate Advisor

    Other advisors: Associate Professor Karen Steel, Dr Michael Heitzmann

  • Doctor Philosophy

    Automation of Manufacturing Processes for Custom Made Foot Orthotics

    Associate Advisor

  • Doctor Philosophy

    Damage Monitoring in Brittle Rocks with Nonlinear Ultrasonic

    Associate Advisor

    Other advisors: Dr Mehdi Serati, Dr Mitch Dunn

Completed supervision

Enquiries

For media enquiries about Professor Martin Veidt's areas of expertise, story ideas and help finding experts, contact our Media team:

communications@uq.edu.au