Professor Martin Veidt
Professor

Martin Veidt

Email: 
Phone: 
+61 7 336 53621

Background

Dr Martin Veidt's research interests are in applied mechanics covering all aspects of through life support of materials and structures with a special focus on composites such as fibre-reinforced laminates, sandwich structures and hybrid metal fibre laminates. This includes quality assurance and quantitative non-destructive evaluation using conventional, guided wave and non-linear ultrasonics; stress analysis and damage mechanics; and experimental determination of mechanical characteristics of materials and interfaces.

He received his Dr sc techn from the Swiss Federal Institute of Technology (ETH) in Zurich in 1991 and his Dipl Masch Ing ETH from there in 1986. His current research projects are in the fields of:

  • Non-linear ultrasonics
  • Ultrasonic manipulation of microbubbles for drug delivery
  • Functional composites
  • Hybrid composite laminates
  • Light weighting

Availability

Professor Martin Veidt is:
Not available for supervision

Fields of research

Engineering Materials engineering

Qualifications

  • Bachelor of Engineering, Swiss Federal Institute of Technology ETH Zürich
  • Doctor of Philosophy, Swiss Federal Institute of Technology ETH Zürich

Research interests

  • Applied Mechanics

  • Nondestructive Evaluation, Ultrasonics, Guided Wave Ultrasonics, Non-linear Ultrasonics

  • Ultrasonic Manipulation of Microbubbles

  • Structural Health Management

  • Composite Materials

  • Light Weighting

  • Damage Modelling

Search Professor Martin Veidt’s works on UQ eSpace

216 works between 1990 and 2024
All (216) Journal Article (100) Book Chapter (5) Conference Publication (109) Other Outputs (1) Edited Outputs (1)

161 - 180 of 216 works

2004

Journal Article

Crack detection in welded mechanical structures using coupled vibrations

Liu, D., Gurgenci, H. and Veidt, M. (2004). Crack detection in welded mechanical structures using coupled vibrations. Acoustics Australia, 32 (2004), 1-13.

Crack detection in welded mechanical structures using coupled vibrations

2004

Conference Publication

A bayesian artificial neural network method to characterise laminar defects using dynamic measurements

Lam, H. F., Veidt, M. and Kitipornchai, S. (2004). A bayesian artificial neural network method to characterise laminar defects using dynamic measurements. Composites Technologies for 2020, Sydney, Australia, 6-9 July, 2004. Australia: The Asian-Australasian Association for Composite Materials, University of Sydney. doi: 10.1016/B978-1-85573-831-7.50164-4

A bayesian artificial neural network method to characterise laminar defects using dynamic measurements

2004

Conference Publication

Detection of fatigue cracks in boom structures using coupled response measurements

Liu, D., Gurgenci, H. and Veidt, M. (2004). Detection of fatigue cracks in boom structures using coupled response measurements. CRCMining Conference, Noosa Head, Queensland, Australia, 15-16 June 2004. Kenmore East, Australia: CRCMining.

Detection of fatigue cracks in boom structures using coupled response measurements

2004

Journal Article

Transient bending of a piezoelectric circular plate

Zhang, XZ, Veidt, M and Kitipornchai, S (2004). Transient bending of a piezoelectric circular plate. International Journal of Mechanical Sciences, 46 (2004), 1845-1859. doi: 10.1016/j.ijmecsci.2004.10.002

Transient bending of a piezoelectric circular plate

2004

Conference Publication

Characterisation of laminar defects using dynamic measurements and an artificial neural network method

Lam, H. F., Veidt, M. and Kitipornchai, S. (2004). Characterisation of laminar defects using dynamic measurements and an artificial neural network method. Proceedings of 2nd Australasian Workshop of Structural Health Monitoring, Melbourne, Australia, 16-17 December ,2004. Australia: 2nd Australasian Workshop on Structural Health Monitoring.

Characterisation of laminar defects using dynamic measurements and an artificial neural network method

2004

Conference Publication

Assessment of structural integrity through coupled vibration

Liu, D., Gurgenci, H. and Veidt, M. (2004). Assessment of structural integrity through coupled vibration. Structural Integrity and Fracture International Conference (SIF'04), Brisbane, Australia, 26-29 September, 2004. Australia: Australian Fracture Group.

Assessment of structural integrity through coupled vibration

2004

Conference Publication

A new instrument for recording tongue-to-palate pressures during speech

Goozee, J. V., Murdoch, B. E., Veidt, M., Scott, D., Meyers, I. A. and Kerle, S. (2004). A new instrument for recording tongue-to-palate pressures during speech. 26th World Congress of the International Association of Logopedics and Phoniatrics, Brisbane, 29 August - 2 September, 2004.

A new instrument for recording tongue-to-palate pressures during speech

2004

Conference Publication

Design And Application Of A Drill Pipe Fatigue Test Facility

Veidt, M. and Berezovski, A. (2004). Design And Application Of A Drill Pipe Fatigue Test Facility. Structural integrity and fracture 2004, Brisbane, Australia, 26-29 September, 2004.

Design And Application Of A Drill Pipe Fatigue Test Facility

2004

Journal Article

In situ damage detection in frame structures through coupled response measurements

Liu, D., Gurgenci, H. and Veidt, M. (2004). In situ damage detection in frame structures through coupled response measurements. Mechanical Systems and Signal Processing, 18 (3), 573-585. doi: 10.1016/S0888-3270(03)00083-9

In situ damage detection in frame structures through coupled response measurements

2003

Journal Article

Pseudoelastic behaviour of cast magnesium AZ91 alloy under cyclic loading-unloading

Cáceres , C. H., Sumitomo, T. and Veidt, M. (2003). Pseudoelastic behaviour of cast magnesium AZ91 alloy under cyclic loading-unloading. Acta Materialia, 51 (20), 6211-6218. doi: 10.1016/S1359-6454(03)00444-0

Pseudoelastic behaviour of cast magnesium AZ91 alloy under cyclic loading-unloading

2003

Journal Article

Reflection of structural waves at a solid/liquid interface

Chiffoleau, Gwenael J.A., Steinberg, Theodore A. and Veidt, Martin (2003). Reflection of structural waves at a solid/liquid interface. Ultrasonics, 41 (5), 347-356. doi: 10.1016/S0041-624X(03)00122-7

Reflection of structural waves at a solid/liquid interface

2003

Conference Publication

Erosion of Protective FeCO3 Filmes in Single-Phase Flow Accelerated Corrosion of Mild Steel

Ruzic, V. and Veidt, M. (2003). Erosion of Protective FeCO3 Filmes in Single-Phase Flow Accelerated Corrosion of Mild Steel. EUROCORR 2003 The European Corrosion Congress, Hungary, 28 September - 2 October 2003. Budapest, Hungary: European Federation of Corrosion.

Erosion of Protective FeCO3 Filmes in Single-Phase Flow Accelerated Corrosion of Mild Steel

2003

Conference Publication

Ultrasonic measurement technique of burning metals in normal and reduced gravity

Chiffoleau, Gwenael J. A., Steinberg, Theordore A. and Veidt, Martin (2003). Ultrasonic measurement technique of burning metals in normal and reduced gravity. Tenth International Symposium on Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres, Brisbane, Australia, November 2003. New Jersey, USA: American Society for Testing and Materials International (ASTM). doi: 10.1520/STP11581S

Ultrasonic measurement technique of burning metals in normal and reduced gravity

2003

Conference Publication

Modelling of pseudoelastic behaviour in fine grain magnesium

Sumitomo, T., Cáceres, C. H. and Veidt, M. (2003). Modelling of pseudoelastic behaviour in fine grain magnesium. 1st International Light Metals Technology Conference 2003, Brisbane, Australia, 18-20 September 2003. Australia: The Cooperative Research Centre (CRC) for CAST Metals Manufacturing.

Modelling of pseudoelastic behaviour in fine grain magnesium

2003

Journal Article

Crack detection in hollow section structures through coupled response measurements

Liu, D., Gurgenci, H. and Veidt, M. (2003). Crack detection in hollow section structures through coupled response measurements. Journal of Sound and Vibration, 261 (1), 17-29. doi: 10.1016/S0022-460X(02)00922-7

Crack detection in hollow section structures through coupled response measurements

2003

Journal Article

Modelling the input-output behaviour of piezoelectric structural health monitoring systems for composite plates

Liu, TR, Veidt, M and Kitipornchai, S (2003). Modelling the input-output behaviour of piezoelectric structural health monitoring systems for composite plates. Smart Materials & Structures, 12 (5), 836-844. doi: 10.1088/0964-1726/12/5/021

Modelling the input-output behaviour of piezoelectric structural health monitoring systems for composite plates

2003

Journal Article

Reflection of structural waves at a solid/liquid interface

Chiffoleau, Gwenael.J. A., Steinberg, Theodore A. and Veidt, Martin (2003). Reflection of structural waves at a solid/liquid interface. Ultrasonics, 41 (5), 347-356. doi: 10.1016/S0041-642X(03)00122-7

Reflection of structural waves at a solid/liquid interface

2003

Conference Publication

Finite element and MRI model investigations of fluid re-distribution in intervertebral discs under compressive loading

Silva, P., Drew, S., Crozier, S., Veidt, M. and Pearcy, M. (2003). Finite element and MRI model investigations of fluid re-distribution in intervertebral discs under compressive loading. World Congress on Medical Physics & Biomedical Engineering, Sydney Convention & Exhibition Centre, Australia, 24-29 August 2003. Sydney: International Federation for Medical and Biological Engineering.

Finite element and MRI model investigations of fluid re-distribution in intervertebral discs under compressive loading

2003

Conference Publication

Crack detection in welded mechanical structures using coupled vibrations

Liu, D., Gurgenci, H. and Veidt, M. (2003). Crack detection in welded mechanical structures using coupled vibrations. Asia-Pacific Vibration Conference, Gold Coast, Australia, 12-14 November 2003. Brisbane: Queensland University of Technology.

Crack detection in welded mechanical structures using coupled vibrations

2003

Conference Publication

Nonlinear vibration of inhomogeneous FGM plates on elastic foundations

Yang, J., Liew, K. M., Kitipornchai, S. and Veidt, M. (2003). Nonlinear vibration of inhomogeneous FGM plates on elastic foundations. 10th Asia-Pacific Vibration Conference, Royal Pines Resort, Gold Coast, Qld., 12-14 November 2003. Brisbane, Qld.: Queensland University of Technology.

Nonlinear vibration of inhomogeneous FGM plates on elastic foundations

Past funding

  • 2024
    Improving resistance to stress corrosion cracking (SCC) of high-performance aluminim alloys by tailoring alloying elements and microstructure
    Baosteel-Australia Joint Research and Development
    Open grant
  • 2023 - 2024
    Functional composite antenna and radio communications system integration
    Defence Materials Technology Centre
    Open grant
  • 2022 - 2024
    Designed-led advanced manufacturing of smart orthotics for remote Australia (CRC-P administered by iOrthotics)
    iOrthotics Pty Ltd
    Open grant
  • 2021 - 2024
    Industry 4.0 Technical Support (Qld)
    Defence Materials Technology Centre
    Open grant
  • 2020 - 2021
    Non-linear TOFD for the Inspection of Challenging Materials
    Innovation Connections
    Open grant
  • 2020
    Smart Enough Factory Pilot Project
    Defence Materials Technology Centre
    Open grant
  • 2020
    Blue Economy Biofouling Challenges and Possible Solutions
    Blue Economy CRC-Co Ltd
    Open grant
  • 2020
    Review and Optimisation of Dynamic Response Spectroscopy (DRS) Method
    Sonomatic Limited
    Open grant
  • 2019 - 2023
    Functional Antenna Structures
    Defence Materials Technology Centre
    Open grant
  • 2018 - 2023
    Networked FAST Collaboration
    Defence Materials Technology Centre
    Open grant
  • 2018 - 2021
    Nonlinear frequency mixing methods for materials and damage evaluation (ARC Discovery Project administered by the University of New South Wales)
    University of New South Wales
    Open grant
  • 2018 - 2019
    Product innovation project: cascade tyre handler
    Innovation Connections
    Open grant
  • 2018
    Characterisation of epoxy cure kinetics and mechanical performance
    Teakle Composites
    Open grant
  • 2018 - 2019
    The Smart Factory in a Box - IoT Capability Builder
    Defence Materials Technology Centre
    Open grant
  • 2017 - 2020
    Hybrid Composite Materials and Structures
    Defence Materials Technology Centre
    Open grant
  • 2017 - 2018
    Bridging time/size scales in strain measurements with advanced DIC facility (ARC LIEF project administered by The University of Adelaide)
    University of Adelaide
    Open grant
  • 2017 - 2019
    High power density motors incorporating advanced manufacturing methods (CRC - Project led by MagniX)
    Cooperative Research Centre Projects
    Open grant
  • 2016 - 2023
    ARC Research Hub for Advanced Manufacturing of Medical Devices
    ARC Industrial Transformation Research Hubs
    Open grant
  • 2016 - 2017
    High temperature Composite Research in support of the HiFiRE program
    Commonwealth Department of Defence Science and Technology Organisation
    Open grant
  • 2016 - 2017
    Automated fibre braiding facility for multifunctional structural materials (ARC LIEF project administered by RMIT University)
    Royal Melbourne Institute of Technology University
    Open grant
  • 2016
    Investigation of filament winding as an alternative manufacturing route for C/C SCRAM jet combustors
    Commonwealth Defence Science and Technology Group
    Open grant
  • 2016
    Millimetre Waves for Imaging and Sensing
    UQ Major Equipment and Infrastructure
    Open grant
  • 2015 - 2024
    Cross program management
    Defence Materials Technology Centre
    Open grant
  • 2015 - 2018
    Light Weight Material Solutions
    Defence Materials Technology Centre
    Open grant
  • 2015 - 2017
    Baseline-free methods for early damage diagnosis using nonlinear ultrasound (ARC Discovery Project administered by RMIT University)
    University of New South Wales
    Open grant
  • 2015
    Innovating short cycle time manufacturing process for aerospace thermoplastic composites
    UQ Collaboration and Industry Engagement Fund - Seed Research Grant
    Open grant
  • 2014
    MOC - Timothy Cullen (CRC ACS Project 1.1)
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2013 - 2015
    CRC for Advanced Composite Structures Extension Programme: Research Fellow - Dr Blanloeuil
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2013 - 2014
    Performance level structural testing facility
    ARC Linkage Infrastructure, Equipment and Facilities
    Open grant
  • 2013 - 2015
    CRC for Advanced Composite Structures Extension Program - Luigi Vandi
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2012 - 2014
    Towards Autonomous Structural Safety Prognostics: Integrating in-situ Imaging and Predictive Modelling (ARC Discovery Project administered by RMIT)
    Royal Melbourne Institute of Technology University
    Open grant
  • 2011 - 2013
    CRC for Advanced Composite Structures Extension Programme: Research Fellow - Dr Virk
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2011
    CRC for Advanced Composite Structures Extension Program
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2011
    Complete laboratory to semi-industry scale high energy milling and dispersion facility.
    UQ Major Equipment and Infrastructure
    Open grant
  • 2010 - 2011
    CRC for Advanced Composite Structures Extension Program
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2010 - 2013
    CRC for Advanced Composite Structures Extension Program: Research Fellow - Dr Edmund Liew
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2010 - 2015
    Robust Composite Repairs (P3.1)
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2010 - 2015
    Systems Development for Structural Health Monitoring (P3.3)
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2010
    Evaluation of the Flammability, Smoke and Toxicity and Heat Release performance of Castor Plant Composites for Aircraft Cabin Interiors
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2010
    Inspection and repair methods for composite helicopter fuselage structures
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2008 - 2015
    Aircraft prognostic tools to reduce corrosion impacts (DMTC)
    Defence Materials Technology Centre
    Open grant
  • 2008 - 2010
    Research services
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2008 - 2009
    Research services
    Cooperative Research Centre for Advance Composite Structures Ltd
    Open grant
  • 2007 - 2008
    Validating a new methodology for the characterisation of structural damage using plate-wave diffraction tomography
    Department Defence - Defence Science & Technology
    Open grant
  • 2007 - 2009
    Tomographic Imaging of Structural Damage in Plates
    ARC Discovery Projects
    Open grant
  • 2005
    Acousto-Ultrasonic Characterisation and Imaging of Structural Damage
    Department Defence - Defence Science & Technology
    Open grant
  • 2004
    Coal Blending for the Production of Metallurgical Coke of High Quality
    UQ FirstLink Scheme
    Open grant
  • 2004
    2004 Travel Scheme Cat 2_Imperial College London; 24/05/04 to 15/06/04
    UQ Travel Grants Scheme
    Open grant
  • 2004 - 2005
    Development and application of a pressure-sensing electropalatograph for the assessment and treatment of speech disorders
    NHMRC Project - Development Grant
    Open grant
  • 2004
    New Frontiers in Structural Health Monitoring
    ARC Seed Funding for Research Networks
    Open grant
  • 2003 - 2004
    Plate Wave Tomography for Reconstruction of Laminar Defects
    ARC Discovery Projects
    Open grant
  • 2002
    Collaborative research with Prof. Hung, City Univ. of Hong Kong, in the area of health monitoring of fibre-reinforced civil infrastructure repair patches.
    UQ Travel Grants Scheme
    Open grant
  • 2002
    Development and application of a pressure-sensing electropalatograph for the assessment and treatment of chron speech disorders
    University of Queensland Research Development Grants Scheme
    Open grant
  • 2002
    Investigating the fluidity of lumbar spine intervetebral discs using MRI and poroeleastic FE modelling
    University of Queensland Research Development Grants Scheme
    Open grant
  • 2001 - 2003
    Inertial response characteristics and energy absorption efficiency of aluminium foam structrual components to medium velocity impacts
    UQ FirstLink Scheme
    Open grant
  • 2000
    Ultrasonic Non-destructive Evaluation for Erosion-Corrosion Quantification.
    ARC Australian Research Council (Small grants)
    Open grant
  • 1999 - 2001
    Studies on a Sensitive Accurate and Reliable Stress Wave Factor Technique for the Assessment of Composite Structures
    ARC Australian Research Council (Large grants)
    Open grant
  • 1999
    Towards an integrated service life assessment system for drill rods
    UQ Early Career Researcher
    Open grant
  • 1999
    Travel scheme for collaborative research by Dr M Veidt at the Ultrasonics Group, Cornell University USA
    UQ Travel Grants Scheme
    Open grant
  • 1997
    Collaborative visit to the Swiss Federal Laboratories for Materials Testing & Research in Switzerland.
    UQ Travel Grants Scheme
    Open grant
  • 1997
    Dynamic behaviour of soldering tin alloys and soldered joints
    University of Queensland New Staff Research Grant
    Open grant

Availability

Professor Martin Veidt is:
Not available for supervision

Supervision history

Current supervision

  • Doctor Philosophy

    Development of light weight design and material solutions for tubular structures under severe thermomechanical loads

    Principal Advisor

    Other advisors: Associate Professor Michael Bermingham

  • Doctor Philosophy

    Optimisation of laminated composite tubular structures under thermomechanical loading conditions

    Principal Advisor

    Other advisors: Associate Professor Michael Bermingham

  • Doctor Philosophy

    Development of Smart Orthotics for Remote Australia

    Principal Advisor

    Other advisors: Dr Stuart McDonald

  • Doctor Philosophy

    Optimisation of laminated composite tubular structures under thermomechanical loading conditions

    Principal Advisor

    Other advisors: Associate Professor Michael Bermingham

  • Doctor Philosophy

    Characterisation of Foot Biomechanics through Smart Insole and High Speed Camera

    Principal Advisor

    Other advisors: Dr Stuart McDonald

  • Doctor Philosophy

    Automation of Manufacturing Processes for Custom Made Foot Orthotics

    Associate Advisor

  • Doctor Philosophy

    Damage Monitoring in Brittle Rocks with Nonlinear Ultrasonic

    Associate Advisor

    Other advisors: Dr Mehdi Serati, Dr Mitch Dunn

  • Doctor Philosophy

    Characterisation and Optimisation of Large Composite Springs for Wave Energy Converters

    Associate Advisor

    Other advisors: Dr Milad Bazli, Dr Michael Heitzmann

  • Doctor Philosophy

    Development of an acoustofluidic ocular drug delivery platform: Preparations for clinical translation

    Associate Advisor

    Other advisors: Dr Karnaker Reddy Tupally, Dr Harendra Parekh

  • Doctor Philosophy

    Development of all-CMC joining systems

    Associate Advisor

    Other advisors: Dr Michael Heitzmann

  • Doctor Philosophy

    Development of an acoustofluidic ocular drug delivery platform: Preparations for clinical translation

    Associate Advisor

    Other advisors: Dr Karnaker Reddy Tupally, Dr Harendra Parekh

  • Doctor Philosophy

    Automation of Manufacturing Processes for Custom Made Foot Orthotics

    Associate Advisor

  • Doctor Philosophy

    Automation of Manufacturing Processes for Custom Made Foot Orthotics

    Associate Advisor

  • Doctor Philosophy

    Characterisation and optimisation of the fatigue performance of large composite springs for the usage in Wave Energy Converters.

    Associate Advisor

    Other advisors: Dr Milad Bazli, Dr Michael Heitzmann

  • Doctor Philosophy

    Damage Monitoring in Brittle Rocks with Nonlinear Ultrasonic

    Associate Advisor

    Other advisors: Dr Mitch Dunn, Dr Mehdi Serati

  • Doctor Philosophy

    Mechanical and Tribological Performances of Glass Fibre Reinforced Thermoplastics - Investigation into Material Responses, Abrasive Sensitivity and Adverse Operating Conditions

    Associate Advisor

    Other advisors: Associate Professor Karen Steel, Dr Michael Heitzmann

Completed supervision

Enquiries

For media enquiries about Professor Martin Veidt's areas of expertise, story ideas and help finding experts, contact our Media team:

communications@uq.edu.au