|
2024 Journal Article A geometric model for the number of fibers caught by the barbed needle in the needlepunching processSingh, Danvendra, Rawal, Amit, Shukla, Siddharth, Kudisonga, Christian, Heitzmann, Michael, Szenti, Imre and Kukovecz, Akos (2024). A geometric model for the number of fibers caught by the barbed needle in the needlepunching process. Textile Research Journal. doi: 10.1177/00405175241268611 |
|
2024 Journal Article Tribological and mechanical characterization of glass fiber polyamide composites under hydrothermal agingKhakbaz, Hadis, Basnayake, Asanka Pradeep, Harikumar, Akshay Krishna Ambika, Firouzi, Mahshid, Martin, Darren and Heitzmann, Michael (2024). Tribological and mechanical characterization of glass fiber polyamide composites under hydrothermal aging. Polymer Degradation and Stability, 227 110870, 110870. doi: 10.1016/j.polymdegradstab.2024.110870 |
|
2024 Journal Article A DOPO-eugenol linear siloxane as a highly effective liquid flame retardant also imparting improved mechanical properties to an epoxy amine networkGan, Houlei, Senanayake, Rusheni B., Nunna, Srinivas, Zhang, Juan, Basnayake, Asanka P., Heitzmann, Michael T. and Varley, Russell J. (2024). A DOPO-eugenol linear siloxane as a highly effective liquid flame retardant also imparting improved mechanical properties to an epoxy amine network. Chemical Engineering Journal, 498 155293, 155293. doi: 10.1016/j.cej.2024.155293 |
|
2024 Journal Article Partially bio-derived phosphazene-tannic acid microspheres as fire retardant additives for an epoxy tannic acid resin systemSenanayake, Rusheni Bhagya, Gan, Houlei, Liu, Dan, Zhang, Juan, Basnayake, Asanka P., Heitzmann, Michael T. and Varley, Russell J. (2024). Partially bio-derived phosphazene-tannic acid microspheres as fire retardant additives for an epoxy tannic acid resin system. Composites Part B: Engineering, 287 111831, 111831. doi: 10.1016/j.compositesb.2024.111831 |
|
2024 Journal Article Manufacture and structural performance of modular hybrid FRP–timber thin-walled beamsCui, Weiqi, Gattas, Joseph M. and Heitzmann, Michael T. (2024). Manufacture and structural performance of modular hybrid FRP–timber thin-walled beams. Construction and Building Materials, 435 136705, 136705. doi: 10.1016/j.conbuildmat.2024.136705 |
|
2024 Journal Article Graphene/graphene oxide and melamine as synergistic additives for polyester nanocomposite coatingsZhao, Yitian, Lin, Weikang, Edwards, Grant, Zou, Yanbin, Zhao, Xiujuan, Song, Shuning, Heitzmann, Michael, Martin, Darren, Grøndahl, Lisbeth, Lu, Mingyuan and Huang, Han (2024). Graphene/graphene oxide and melamine as synergistic additives for polyester nanocomposite coatings. Materials Chemistry and Physics, 320 129384, 129384. doi: 10.1016/j.matchemphys.2024.129384 |
|
2024 Journal Article Mechanical properties and scratch recovery of nanoclay/polyester composite coatings for pre-coated metal (PCM) sheetsLin, Weikang, Zhao, Yitian, Edwards, Grant, Guo, Qiang, Chen, Tianzhen, Song, Shuning, Heitzmann, Michael, Martin, Darren, Grøndahl, Lisbeth, Lu, Mingyuan and Huang, Han (2024). Mechanical properties and scratch recovery of nanoclay/polyester composite coatings for pre-coated metal (PCM) sheets. Composites Part B: Engineering, 273 111217. doi: 10.1016/j.compositesb.2024.111217 |
|
2024 Journal Article Assessment of the tribological performance of glass fibre reinforced polyamide 6 under harsh abrasive environmentsZaghloul, Moustafa Mahmoud Yousry, Steel, Karen, Veidt, Martin and Heitzmann, Michael T. (2024). Assessment of the tribological performance of glass fibre reinforced polyamide 6 under harsh abrasive environments. Tribology International, 191 109059, 109059. doi: 10.1016/j.triboint.2023.109059 |
|
2023 Journal Article Towards three‐dimensional printed thermal conductive polymeric composites using a binary‐composite hybrid based on boron nitride nanoparticles and micro‐diamondsKhakbaz, Hadis, Sayyar, Sepidar, Beirne, Stephen, Heitzmann, Michael and Innis, Peter C. (2023). Towards three‐dimensional printed thermal conductive polymeric composites using a binary‐composite hybrid based on boron nitride nanoparticles and micro‐diamonds. Macromolecular Rapid Communications, 44 (21) 2300335, e2300335. doi: 10.1002/marc.202300335 |
|
2023 Journal Article Influence of Counter-Face Grit Size and Lubricant on the Abrasive Wear Behaviour of Thermoplastic Polymers Reinforced with Glass FibresZaghloul, Moustafa Mahmoud Yousry, Steel, Karen, Veidt, Martin, Martin, Darren, Firouzi, Mahshid and Heitzmann, Michael T. (2023). Influence of Counter-Face Grit Size and Lubricant on the Abrasive Wear Behaviour of Thermoplastic Polymers Reinforced with Glass Fibres. Tribology Letters, 71 (3) 102, 1-22. doi: 10.1007/s11249-023-01774-9 |
|
2023 Journal Article Residual compressive strength of filament wound hybrid glass/carbon fibre reinforced polymer tubes after exposure to elevated temperatureAbolfazli, Milad, Bazli, Milad, Rajabipour, Ali, Heitzmann, Michael, Pourasiabi, Hamid, Wang, Hao and Arashpour, Mehrdad (2023). Residual compressive strength of filament wound hybrid glass/carbon fibre reinforced polymer tubes after exposure to elevated temperature. Composite Structures, 316 117050, 1-18. doi: 10.1016/j.compstruct.2023.117050 |
|
2023 Journal Article Cure cycle optimisation of structural epoxies used in composite civil infrastructure through the use of TTT diagramsFernando, Shanelle, Vandi, Luigi-Jules, Heitzmann, Michael and Fernando, Dilum (2023). Cure cycle optimisation of structural epoxies used in composite civil infrastructure through the use of TTT diagrams. Construction and Building Materials, 383 131332, 1-10. doi: 10.1016/j.conbuildmat.2023.131332 |
|
2023 Journal Article Residual compressive strength of seawater sea sand concrete filled hybrid carbon-glass fibre reinforced polymer tubes under seawater: effects of fibre type and orientationBazli, Milad, Benny, Benzen, Rajabipour, Ali, Pourasiabi, Hamid, Heitzmann, Michael T. and Arashpour, Mehrdad (2023). Residual compressive strength of seawater sea sand concrete filled hybrid carbon-glass fibre reinforced polymer tubes under seawater: effects of fibre type and orientation. Journal of Building Engineering, 70 106383, 1-19. doi: 10.1016/j.jobe.2023.106383 |
|
2023 Journal Article Mechanical and tribological performances of thermoplastic polymers reinforced with glass fibres at variable fibre volume fractionsZaghloul, Moustafa Mahmoud Yousry, Steel, Karen, Veidt, Martin and Heitzmann, Michael T. (2023). Mechanical and tribological performances of thermoplastic polymers reinforced with glass fibres at variable fibre volume fractions. Polymers, 15 (3) 694, 1-23. doi: 10.3390/polym15030694 |
|
2023 Journal Article Residual compressive section capacity of filament wound carbon, glass, and basalt fibre-reinforced polymer tubes: Influence of elevated temperaturesAbolfazli, Milad, Bazli, Milad, Rajabipour, Ali, Heitzmann, Michael T. and Amirzadeh, Zhila (2023). Residual compressive section capacity of filament wound carbon, glass, and basalt fibre-reinforced polymer tubes: Influence of elevated temperatures. Composite Structures, 304 116490, 1-10. doi: 10.1016/j.compstruct.2022.116490 |
|
2023 Journal Article Towards the development of a fire retardant sugar-cane bagasse ply for composite manufacture: a flammability studyBasnayake, Asanka P., Hidalgo, Juan P. and Heitzmann, Michael T (2023). Towards the development of a fire retardant sugar-cane bagasse ply for composite manufacture: a flammability study. Journal of Composite Materials, 57 (2), 297-311. doi: 10.1177/00219983221144709 |
|
2022 Journal Article Composite springs for mooring tensioners: a systematic review of material selection, fatigue performance, manufacturing, and applicationsCai, Yuanzhen, Bazli, Milad, Basnayake, Asanka P., Veidt, Martin and Heitzmann, Michael T. (2022). Composite springs for mooring tensioners: a systematic review of material selection, fatigue performance, manufacturing, and applications. Journal of Marine Science and Engineering, 10 (9) 1286, 1-34. doi: 10.3390/jmse10091286 |
|
2022 Journal Article Durability of fibre-reinforced polymer-wood composite members: An overviewBazli, Milad, Heitzmann, Michael and Villacorta Hernandez, Byron (2022). Durability of fibre-reinforced polymer-wood composite members: An overview. Composite Structures, 295 115827, 115827. doi: 10.1016/j.compstruct.2022.115827 |
|
2022 Journal Article Long-span timber flooring systems: A systematic review from structural performance and design considerations to constructability and sustainability aspectsBazli, Milad, Heitzmann, Michael and Ashrafi, Hamed (2022). Long-span timber flooring systems: A systematic review from structural performance and design considerations to constructability and sustainability aspects. Journal of Building Engineering, 48 103981, 103981. doi: 10.1016/j.jobe.2021.103981 |
|
2022 Journal Article Behaviour of hybrid glass fibre-reinforced polymer and timber composite laminates under shear loading: importance of fibre rotationMiao, Chuang, Fernando, Dilum, Zhou, Hao, Wilson, Peter and Heitzmann, Michael (2022). Behaviour of hybrid glass fibre-reinforced polymer and timber composite laminates under shear loading: importance of fibre rotation. Composite Structures, 287 115304, 1-12. doi: 10.1016/j.compstruct.2022.115304 |
