Skip to menu Skip to content Skip to footer

2024

Journal Article

A geometric model for the number of fibers caught by the barbed needle in the needlepunching process

Singh, Danvendra, Rawal, Amit, Shukla, Siddharth, Kudisonga, Christian, Heitzmann, Michael, Szenti, Imre and Kukovecz, Akos (2024). A geometric model for the number of fibers caught by the barbed needle in the needlepunching process. Textile Research Journal. doi: 10.1177/00405175241268611

A geometric model for the number of fibers caught by the barbed needle in the needlepunching process

2024

Journal Article

A DOPO-eugenol linear siloxane as a highly effective liquid flame retardant also imparting improved mechanical properties to an epoxy amine network

Gan, Houlei, Senanayake, Rusheni B., Nunna, Srinivas, Zhang, Juan, Basnayake, Asanka P., Heitzmann, Michael T. and Varley, Russell J. (2024). A DOPO-eugenol linear siloxane as a highly effective liquid flame retardant also imparting improved mechanical properties to an epoxy amine network. Chemical Engineering Journal, 498 155293, 155293. doi: 10.1016/j.cej.2024.155293

A DOPO-eugenol linear siloxane as a highly effective liquid flame retardant also imparting improved mechanical properties to an epoxy amine network

2024

Journal Article

Partially bio-derived phosphazene-tannic acid microspheres as fire retardant additives for an epoxy tannic acid resin system

Senanayake, Rusheni Bhagya, Gan, Houlei, Liu, Dan, Zhang, Juan, Basnayake, Asanka P., Heitzmann, Michael T. and Varley, Russell J. (2024). Partially bio-derived phosphazene-tannic acid microspheres as fire retardant additives for an epoxy tannic acid resin system. Composites Part B: Engineering, 287 111831, 111831. doi: 10.1016/j.compositesb.2024.111831

Partially bio-derived phosphazene-tannic acid microspheres as fire retardant additives for an epoxy tannic acid resin system

2024

Journal Article

Tribological and mechanical characterization of glass fiber polyamide composites under hydrothermal aging

Khakbaz, Hadis, Basnayake, Asanka Pradeep, Harikumar, Akshay Krishna Ambika, Firouzi, Mahshid, Martin, Darren and Heitzmann, Michael (2024). Tribological and mechanical characterization of glass fiber polyamide composites under hydrothermal aging. Polymer Degradation and Stability, 227 110870, 110870. doi: 10.1016/j.polymdegradstab.2024.110870

Tribological and mechanical characterization of glass fiber polyamide composites under hydrothermal aging

2024

Journal Article

Manufacture and structural performance of modular hybrid FRP–timber thin-walled beams

Cui, Weiqi, Gattas, Joseph M. and Heitzmann, Michael T. (2024). Manufacture and structural performance of modular hybrid FRP–timber thin-walled beams. Construction and Building Materials, 435 136705, 136705. doi: 10.1016/j.conbuildmat.2024.136705

Manufacture and structural performance of modular hybrid FRP–timber thin-walled beams

2024

Journal Article

Graphene/graphene oxide and melamine as synergistic additives for polyester nanocomposite coatings

Zhao, Yitian, Lin, Weikang, Edwards, Grant, Zou, Yanbin, Zhao, Xiujuan, Song, Shuning, Heitzmann, Michael, Martin, Darren, Grøndahl, Lisbeth, Lu, Mingyuan and Huang, Han (2024). Graphene/graphene oxide and melamine as synergistic additives for polyester nanocomposite coatings. Materials Chemistry and Physics, 320 129384, 129384. doi: 10.1016/j.matchemphys.2024.129384

Graphene/graphene oxide and melamine as synergistic additives for polyester nanocomposite coatings

2024

Journal Article

Mechanical properties and scratch recovery of nanoclay/polyester composite coatings for pre-coated metal (PCM) sheets

Lin, Weikang, Zhao, Yitian, Edwards, Grant, Guo, Qiang, Chen, Tianzhen, Song, Shuning, Heitzmann, Michael, Martin, Darren, Grøndahl, Lisbeth, Lu, Mingyuan and Huang, Han (2024). Mechanical properties and scratch recovery of nanoclay/polyester composite coatings for pre-coated metal (PCM) sheets. Composites Part B: Engineering, 273 111217. doi: 10.1016/j.compositesb.2024.111217

Mechanical properties and scratch recovery of nanoclay/polyester composite coatings for pre-coated metal (PCM) sheets

2024

Journal Article

Assessment of the tribological performance of glass fibre reinforced polyamide 6 under harsh abrasive environments

Zaghloul, Moustafa Mahmoud Yousry, Steel, Karen, Veidt, Martin and Heitzmann, Michael T. (2024). Assessment of the tribological performance of glass fibre reinforced polyamide 6 under harsh abrasive environments. Tribology International, 191 109059, 109059. doi: 10.1016/j.triboint.2023.109059

Assessment of the tribological performance of glass fibre reinforced polyamide 6 under harsh abrasive environments

2023

Journal Article

Towards three‐dimensional printed thermal conductive polymeric composites using a binary‐composite hybrid based on boron nitride nanoparticles and micro‐diamonds

Khakbaz, Hadis, Sayyar, Sepidar, Beirne, Stephen, Heitzmann, Michael and Innis, Peter C. (2023). Towards three‐dimensional printed thermal conductive polymeric composites using a binary‐composite hybrid based on boron nitride nanoparticles and micro‐diamonds. Macromolecular Rapid Communications, 44 (21) 2300335, e2300335. doi: 10.1002/marc.202300335

Towards three‐dimensional printed thermal conductive polymeric composites using a binary‐composite hybrid based on boron nitride nanoparticles and micro‐diamonds

2023

Conference Publication

Finite element analysis of composite mooring tensioner springs in wave energy converters

Cai, Yuanzhen and Heitzmann, Michael T. (2023). Finite element analysis of composite mooring tensioner springs in wave energy converters. 42nd International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2023), Melbourne, Australia, 11-16 June 2023. New York, NY, United States: American Society of Mechanical Engineers. doi: 10.1115/omae2023-105262

Finite element analysis of composite mooring tensioner springs in wave energy converters

2023

Journal Article

Influence of Counter-Face Grit Size and Lubricant on the Abrasive Wear Behaviour of Thermoplastic Polymers Reinforced with Glass Fibres

Zaghloul, Moustafa Mahmoud Yousry, Steel, Karen, Veidt, Martin, Martin, Darren, Firouzi, Mahshid and Heitzmann, Michael T. (2023). Influence of Counter-Face Grit Size and Lubricant on the Abrasive Wear Behaviour of Thermoplastic Polymers Reinforced with Glass Fibres. Tribology Letters, 71 (3) 102, 1-22. doi: 10.1007/s11249-023-01774-9

Influence of Counter-Face Grit Size and Lubricant on the Abrasive Wear Behaviour of Thermoplastic Polymers Reinforced with Glass Fibres

2023

Journal Article

Residual compressive strength of filament wound hybrid glass/carbon fibre reinforced polymer tubes after exposure to elevated temperature

Abolfazli, Milad, Bazli, Milad, Rajabipour, Ali, Heitzmann, Michael, Pourasiabi, Hamid, Wang, Hao and Arashpour, Mehrdad (2023). Residual compressive strength of filament wound hybrid glass/carbon fibre reinforced polymer tubes after exposure to elevated temperature. Composite Structures, 316 117050, 1-18. doi: 10.1016/j.compstruct.2023.117050

Residual compressive strength of filament wound hybrid glass/carbon fibre reinforced polymer tubes after exposure to elevated temperature

2023

Journal Article

Cure cycle optimisation of structural epoxies used in composite civil infrastructure through the use of TTT diagrams

Fernando, Shanelle, Vandi, Luigi-Jules, Heitzmann, Michael and Fernando, Dilum (2023). Cure cycle optimisation of structural epoxies used in composite civil infrastructure through the use of TTT diagrams. Construction and Building Materials, 383 131332, 1-10. doi: 10.1016/j.conbuildmat.2023.131332

Cure cycle optimisation of structural epoxies used in composite civil infrastructure through the use of TTT diagrams

2023

Journal Article

Residual compressive strength of seawater sea sand concrete filled hybrid carbon-glass fibre reinforced polymer tubes under seawater: effects of fibre type and orientation

Bazli, Milad, Benny, Benzen, Rajabipour, Ali, Pourasiabi, Hamid, Heitzmann, Michael T. and Arashpour, Mehrdad (2023). Residual compressive strength of seawater sea sand concrete filled hybrid carbon-glass fibre reinforced polymer tubes under seawater: effects of fibre type and orientation. Journal of Building Engineering, 70 106383, 1-19. doi: 10.1016/j.jobe.2023.106383

Residual compressive strength of seawater sea sand concrete filled hybrid carbon-glass fibre reinforced polymer tubes under seawater: effects of fibre type and orientation

2023

Journal Article

Mechanical and tribological performances of thermoplastic polymers reinforced with glass fibres at variable fibre volume fractions

Zaghloul, Moustafa Mahmoud Yousry, Steel, Karen, Veidt, Martin and Heitzmann, Michael T. (2023). Mechanical and tribological performances of thermoplastic polymers reinforced with glass fibres at variable fibre volume fractions. Polymers, 15 (3) 694, 1-23. doi: 10.3390/polym15030694

Mechanical and tribological performances of thermoplastic polymers reinforced with glass fibres at variable fibre volume fractions

2023

Journal Article

Residual compressive section capacity of filament wound carbon, glass, and basalt fibre-reinforced polymer tubes: Influence of elevated temperatures

Abolfazli, Milad, Bazli, Milad, Rajabipour, Ali, Heitzmann, Michael T. and Amirzadeh, Zhila (2023). Residual compressive section capacity of filament wound carbon, glass, and basalt fibre-reinforced polymer tubes: Influence of elevated temperatures. Composite Structures, 304 116490, 1-10. doi: 10.1016/j.compstruct.2022.116490

Residual compressive section capacity of filament wound carbon, glass, and basalt fibre-reinforced polymer tubes: Influence of elevated temperatures

2023

Conference Publication

Tribological performance of nylon-6/oyster shell composites

Ambika Harikumar, Akshay Krishna, Basnayake, Asanka, Khakbaz, Hadis, Martin, Darren and Heitzmann, Michael (2023). Tribological performance of nylon-6/oyster shell composites. ASME 2023 42nd International Conference on Ocean, Offshore and Arctic Engineering, Melbourne, VIC, Australia, 11 - 16 June 2023. New York, NY, United States: American Society of Mechanical Engineers (ASME). doi: 10.1115/OMAE2023-104611

Tribological performance of nylon-6/oyster shell composites

2023

Journal Article

Towards the development of a fire retardant sugar-cane bagasse ply for composite manufacture: a flammability study

Basnayake, Asanka P., Hidalgo, Juan P. and Heitzmann, Michael T (2023). Towards the development of a fire retardant sugar-cane bagasse ply for composite manufacture: a flammability study. Journal of Composite Materials, 57 (2), 297-311. doi: 10.1177/00219983221144709

Towards the development of a fire retardant sugar-cane bagasse ply for composite manufacture: a flammability study

2022

Journal Article

Composite springs for mooring tensioners: a systematic review of material selection, fatigue performance, manufacturing, and applications

Cai, Yuanzhen, Bazli, Milad, Basnayake, Asanka P., Veidt, Martin and Heitzmann, Michael T. (2022). Composite springs for mooring tensioners: a systematic review of material selection, fatigue performance, manufacturing, and applications. Journal of Marine Science and Engineering, 10 (9) 1286, 1-34. doi: 10.3390/jmse10091286

Composite springs for mooring tensioners: a systematic review of material selection, fatigue performance, manufacturing, and applications

2022

Journal Article

Durability of fibre-reinforced polymer-wood composite members: An overview

Bazli, Milad, Heitzmann, Michael and Villacorta Hernandez, Byron (2022). Durability of fibre-reinforced polymer-wood composite members: An overview. Composite Structures, 295 115827, 115827. doi: 10.1016/j.compstruct.2022.115827

Durability of fibre-reinforced polymer-wood composite members: An overview