|
2026 Journal Article New insights into the effect of heat-treatment on the machinability and tool wear in machining of additively manufactured metastable β-Ti Alloy Beta-C (Ti-3Al-8V-6Cr-4Mo-4Zr)Zafar, M. Adeel, Ng, Chi-Ho, Singh, Mandeep, Dargusch, Matthew S. and Bermingham, Michael J. (2026). New insights into the effect of heat-treatment on the machinability and tool wear in machining of additively manufactured metastable β-Ti Alloy Beta-C (Ti-3Al-8V-6Cr-4Mo-4Zr). Tribology International, 213 111033, 111033. doi: 10.1016/j.triboint.2025.111033 |
|
2025 Journal Article A compliance-based method for correcting fatigue crack growth data in the presence of residual stressesKhanna, Aditya, Vidler, James, Bermingham, Michael, Sales, Andrew, Yin, Ling and Kotousov, Andrei (2025). A compliance-based method for correcting fatigue crack growth data in the presence of residual stresses. International Journal of Fatigue, 199 109066, 1-17. doi: 10.1016/j.ijfatigue.2025.109066 |
|
2025 Journal Article Designing against ω phase embrittlement in additively manufactured Ti−13.5Mo metastable β titanium alloy through Sn additionsZhang, Jingqi, Bermingham, Michael, Otte, Joseph, Hou, Ziyong, Ng, Chi-Ho, Kent, Damon, Huang, Xiaoxu and Dargusch, Matthew (2025). Designing against ω phase embrittlement in additively manufactured Ti−13.5Mo metastable β titanium alloy through Sn additions. Additive Manufacturing, 97 104597. doi: 10.1016/j.addma.2024.104597 |
|
2025 Journal Article Quantitative analysis of the correlation between dual-deposition parameters and porosity in wire arc additive manufactured Ti-22V-4Al alloysLu, Yancen, Wang, Yuan, Ng, Chi-Ho, Bermingham, Michael and Dargusch, Matthew (2025). Quantitative analysis of the correlation between dual-deposition parameters and porosity in wire arc additive manufactured Ti-22V-4Al alloys. Smart Materials in Manufacturing, 3 100090, 100090. doi: 10.1016/j.smmf.2025.100090 |
|
2024 Journal Article Toward a standardized approach for characterizing β‐fleck defects in titanium alloysNg, Chi‐Ho, Bermingham, Michael, Collins, Peter and Dargusch, Matthew (2024). Toward a standardized approach for characterizing β‐fleck defects in titanium alloys. Advanced Engineering Materials, 26 (16) 2400594. doi: 10.1002/adem.202400594 |
|
2024 Journal Article A review of the use of cryogenic coolant during machining titanium alloysSivarupan, Tharmalingam, Bermingham, Michael, Ng, Chi-Ho, Sun, Shoujin and Dargusch, Matthew (2024). A review of the use of cryogenic coolant during machining titanium alloys. Sustainable Materials and Technologies, 40 e00946. doi: 10.1016/j.susmat.2024.e00946 |
|
2024 Journal Article Machine learning driven instance segmentation providing new porosity insights into wire arc directed energy deposited Ti-22V-4AlWang, Yuan, Ng, Chi-Ho, Bermingham, Michael and Dargusch, Matthew (2024). Machine learning driven instance segmentation providing new porosity insights into wire arc directed energy deposited Ti-22V-4Al. Additive Manufacturing, 90 104323, 104323. doi: 10.1016/j.addma.2024.104323 |
|
2024 Journal Article In-situ investigation of the time-temperature dependent lattice and microstructure of Sn-Bi alloysTan, Xin F., Hao, Qichao, Zhou, Jiye, Gu, Qinfen, McDonald, Stuart D., Sweatman, Keith, Ikeda, Masahiko, Yasuda, Kazuhiro, Bermingham, Michael J. and Nogita, Kazuhiro (2024). In-situ investigation of the time-temperature dependent lattice and microstructure of Sn-Bi alloys. Materialia, 33 101974, 1-12. doi: 10.1016/j.mtla.2023.101974 |
|
2024 Journal Article Ultrauniform, strong, and ductile 3D-printed titanium alloy through bifunctional alloy designZhang, Jingqi, Bermingham, Michael J., Otte, Joseph, Liu, Yingang, Hou, Ziyong, Yang, Nan, Yin, Yu, Bayat, Mohamad, Lin, Weikang, Huang, Xiaoxu, StJohn, David H. and Dargusch, Matthew S. (2024). Ultrauniform, strong, and ductile 3D-printed titanium alloy through bifunctional alloy design. Science, 383 (6683), 639-645. doi: 10.1126/science.adj0141 |
|
2024 Journal Article Tensile properties and microstructural evolution of 17–4 PH stainless steel fabricated by laser hybrid additive manufacturing technologyLi, Nan, Wang, Qiang, Bermingham, Michael, Niu, Wenjuan, Han, Peng, Guo, Nan and Li, Shenao (2024). Tensile properties and microstructural evolution of 17–4 PH stainless steel fabricated by laser hybrid additive manufacturing technology. International Journal of Plasticity, 173 103885, 103885. doi: 10.1016/j.ijplas.2024.103885 |
|
2024 Journal Article Controlling pore position during transient liquid phase bonding for high-temperature soldering processesRazak, N. R. Abdul, Tan, Xin F., McDonald, Stuart D., Bermingham, Michael J., Venezuela, Jeffrey, Nishimura, Tetsuro and Nogita, Kazuhiro (2024). Controlling pore position during transient liquid phase bonding for high-temperature soldering processes. Transactions of The Japan Institute of Electronics Packaging, 17 E23-009. doi: 10.5104/jiepeng.17.e23-009-1 |
|
2023 Journal Article The effects of Sb on the lattice and microstructure characteristics of hypo-eutectic Sn-Bi alloysTan, Xin F., Hao, Qichao, Gu, Qinfen, McDonald, Stuart D., Sweatman, Keith, Bermingham, Michael and Nogita, Kazuhiro (2023). The effects of Sb on the lattice and microstructure characteristics of hypo-eutectic Sn-Bi alloys. Materials Characterization, 201 112934, 1-11. doi: 10.1016/j.matchar.2023.112934 |
|
2023 Journal Article Eliminating porosity defects, promoting equiaxed grains and improving the mechanical properties of additively manufactured Ti-22V-4Al with super-transus hot isostatic pressingNg, C. H., Bermingham, M. J. and Dargusch, M. S. (2023). Eliminating porosity defects, promoting equiaxed grains and improving the mechanical properties of additively manufactured Ti-22V-4Al with super-transus hot isostatic pressing. Additive Manufacturing, 72 103630, 1-10. doi: 10.1016/j.addma.2023.103630 |
|
2023 Journal Article Towards isotropic behaviour in Ti–6Al–4V fabricated with laser powder bed fusion and super transus hot isostatic pressingZhang, Meili, Ng, Chi-Ho, Dehghan-Manshadi, Ali, Hall, Chris, Bermingham, Michael J. and Dargusch, Matthew S. (2023). Towards isotropic behaviour in Ti–6Al–4V fabricated with laser powder bed fusion and super transus hot isostatic pressing. Materials Science and Engineering: A, 874 145094, 1-7. doi: 10.1016/j.msea.2023.145094 |
|
2023 Journal Article Fabrication and properties of biodegradable akermanite-reinforced Fe35Mn alloys for temporary orthopedic implant applicationsZhang, Meili, Yang, Nan, Dehghan-Manshadi, Ali, Venezuela, Jeffrey, Bermingham, Michael J. and Dargusch, Matthew S. (2023). Fabrication and properties of biodegradable akermanite-reinforced Fe35Mn alloys for temporary orthopedic implant applications. ACS Biomaterials Science and Engineering, 9 (3), 1261-1273. doi: 10.1021/acsbiomaterials.2c01228 |
|
2023 Journal Article Fatigue behaviour of L-DED processed Ti-6Al-4V with microstructures refined by trace boron additionZhang, Kai, Liu, Ying, Tian, Xinni, Yang, Yi, Zhu, Yuman, Bermingham, Michael and Huang, Aijun (2023). Fatigue behaviour of L-DED processed Ti-6Al-4V with microstructures refined by trace boron addition. International Journal of Fatigue, 168 107454, 107454. doi: 10.1016/j.ijfatigue.2022.107454 |
|
2023 Journal Article Towards uniform and enhanced tensile ductility of additively manufactured Ti−5Al−5Mo−5V−3Cr alloy through designing gradient interlayer deposition timeZhang, Jingqi, Bermingham, Michael, Otte, Joseph, Liu, Yingang and Dargusch, Matthew (2023). Towards uniform and enhanced tensile ductility of additively manufactured Ti−5Al−5Mo−5V−3Cr alloy through designing gradient interlayer deposition time. Scripta Materialia, 223 115066, 115066. doi: 10.1016/j.scriptamat.2022.115066 |
|
2023 Journal Article Deep learning based modelling of three-dimensional magnetic fieldNguyen, Van Tai, Bollmann, Steffen, Bermingham, Michael, Nguyen, Ha Xuan and Dargusch, Matthew S. (2023). Deep learning based modelling of three-dimensional magnetic field. Progress In Electromagnetics Research B, 100, 173-189. doi: 10.2528/pierb23051402 |
|
2022 Journal Article Effect of Hot Isostatic Pressing and heat treatments on porosity of Wire Arc Additive Manufactured Al 2319Mclean, N., Bermingham, M.J., Colegrove, P., Sales, A., Soro, N., Ng, C.H. and Dargusch, M.S. (2022). Effect of Hot Isostatic Pressing and heat treatments on porosity of Wire Arc Additive Manufactured Al 2319. Journal of Materials Processing Technology, 310 117769, 1-10. doi: 10.1016/j.jmatprotec.2022.117769 |
|
2022 Journal Article Controlling grain size, morphology and texture in additively manufactured β-titanium alloy with super transus hot isostatic pressingNg, C. H., Bermingham, M. J. and Dargusch, M. S. (2022). Controlling grain size, morphology and texture in additively manufactured β-titanium alloy with super transus hot isostatic pressing. Additive Manufacturing, 59 (Part B) 103176, 1-12. doi: 10.1016/j.addma.2022.103176 |
