Skip to menu Skip to content Skip to footer
Professor Amin Abbosh
Professor

Amin Abbosh

Email: 
Phone: 
+61 7 334 67936

Overview

Background

Prof. Amin Abbosh specializes in Medical Microwave Imaging and Microwave and Millimeter-wave Engineering. His work focuses on designing and developing advanced imaging and sensing systems using electromagnetic techniques at radio-wave frequencies.

Prof. Abbosh’s significant contributions include the creation of innovative imaging systems that leverage his expertise in applied electromagnetics and microwave engineering. He has developed comprehensive analytical and computational frameworks, incorporating signal-processing techniques for detection and AI for classification. This approach has led to a new modality for detection and imaging, combining physics-guided and data-driven methods. His work is protected by over 16 patents.

In Communication Technologies, Prof. Abbosh's work focuses on designing flat-panel, low-cost reconfigurable antennas. These antennas form ground satellite terminals that communicate with low-earth-orbit (LEO) satellites, providing reliable broadband access to remote and regional communities. This technology supports e-health services, distance education, and business productivity, and can be used in various on-the-move environments.

Availability

Professor Amin Abbosh is:
Available for supervision
Media expert

Fields of research

Qualifications

  • Bachelor of Science, University of Mosul
  • Masters (Coursework) of Science, University of Mosul
  • Doctor of Philosophy, University of Mosul
  • Postgraduate Diploma in Higher Education, The University of Queensland
  • Doctor of Philosophy, The University of Queensland

Research interests

  • Electromagnetic Medical Imaging

    Electromagnetic Medical Imaging Systems including hardware (microwave devices and antennas), applied electromagnetic, computational electromagnetic, signal processing, and artificial intelligence

  • Microwave Engineering

    Antennas, microwave devices

  • Engineering Electromagnetics

    Applied Electromagnetics in Electrical and Biomedical Engineering

  • Artificial Intelligence

    AI in Electromagnetics and Microwave Engineering

Works

Search Professor Amin Abbosh’s works on UQ eSpace

628 works between 1985 and 2025

161 - 180 of 628 works

2019

Conference Publication

Pattern reconfigurable resonance based reflector antenna for thorax imaging

Rezaeieh, Sasan Ahdi and Abbosh, Amin M. (2019). Pattern reconfigurable resonance based reflector antenna for thorax imaging. 13th European Conference on Antennas and Propagation (EuCAP 2019), Krakow, Poland, 31 March - 5 April 2019. New York, NY, United States: Institute of Electrical and Electronics Engineers (IEEE).

Pattern reconfigurable resonance based reflector antenna for thorax imaging

2019

Conference Publication

Wearable electromagnetic head imaging using magnetic-based antenna arrays

Alqadami, Abdulrahman S. M., Stancombe, Anthony E., Nguyen-Trong, Nghia, Bialkowski, Konstanty and Abbosh, Amin (2019). Wearable electromagnetic head imaging using magnetic-based antenna arrays. 2019 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, Atlanta, GA, United States, 7 - 12 July 2019. Piscataway, NJ, United States: Institute of Electrical and Electronics Engineers. doi: 10.1109/APUSNCURSINRSM.2019.8889119

Wearable electromagnetic head imaging using magnetic-based antenna arrays

2019

Conference Publication

Patch antenna array with continuous frequency and polarization tuning for 5G mid-band communications

Ikram, Muhammad, Nguyen-Trong, Nghia and Abbosh, Amin (2019). Patch antenna array with continuous frequency and polarization tuning for 5G mid-band communications. 2019 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, Atlanta, GA USA, 7-12 July 2019. Piscataway, NJ USA: Institute of Electrical and Electronics Engineers. doi: 10.1109/APUSNCURSINRSM.2019.8888876

Patch antenna array with continuous frequency and polarization tuning for 5G mid-band communications

2019

Journal Article

Polarization-reconfigurable antenna array for millimeter-wave 5G

Al Abbas, Emad, Nguyen-Trong, Nghia, Mobashsher, Ahmed Toaha and Abbosh, Amin M. (2019). Polarization-reconfigurable antenna array for millimeter-wave 5G. IEEE Access, 7 8826264, 131214-131220. doi: 10.1109/access.2019.2939815

Polarization-reconfigurable antenna array for millimeter-wave 5G

2019

Journal Article

Compact unidirectional conformal antenna based on flexible high permittivity custom-made substrate for wearable wideband electromagnetic head imaging system

Alqadami, Abdulrahman S. M., Nguyen-Trong, Nghia, Mohammed, Beadaa, Stancombe, Anthony E., Heitzmann, Michael Tobias and Abbosh, Amin (2019). Compact unidirectional conformal antenna based on flexible high permittivity custom-made substrate for wearable wideband electromagnetic head imaging system. IEEE Transactions on Antennas and Propagation, 68 (1) 8827578, 183-194. doi: 10.1109/tap.2019.2938849

Compact unidirectional conformal antenna based on flexible high permittivity custom-made substrate for wearable wideband electromagnetic head imaging system

2019

Conference Publication

Electromagnetic based fatty liver detection using machine learning

Brankovic, Aida, Zamani, Ali and Abbosh, Amin (2019). Electromagnetic based fatty liver detection using machine learning. European Conference on Antennas and Propagation , Krakow, Poland, 31 March-5 April 2019. New York, NY, United States: Institute of Electrical and Electronics Engineers.

Electromagnetic based fatty liver detection using machine learning

2019

Conference Publication

Dual functional MIMO antenna system for mm-wave 5G and 2 GHz 4G communications

Abbas, Emad Al, Ikram, Muhammad and Abbosh, Amin (2019). Dual functional MIMO antenna system for mm-wave 5G and 2 GHz 4G communications. IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, Atlanta, GA United States, 7-12 July 2019. Piscataway, NJ, United States: Institute of Electrical and Electronics Engineers. doi: 10.1109/APUSNCURSINRSM.2019.8888970

Dual functional MIMO antenna system for mm-wave 5G and 2 GHz 4G communications

2019

Conference Publication

Wideband and compact magneto-electric dipole antenna for electromagnetic medical imaging systems

Darvazehban, Amin, Rezaeieh, Sasan Ahdi and Abbosh, Amin (2019). Wideband and compact magneto-electric dipole antenna for electromagnetic medical imaging systems. 13th European Conference on Antennas and Propagation (EuCAP 2019), Krakow, Poland, 31 March - 5 April 2019. New York, NY, United States: Institute of Electrical and Electronics Engineers (IEEE).

Wideband and compact magneto-electric dipole antenna for electromagnetic medical imaging systems

2019

Journal Article

Two-Dimensional Pattern-Reconfigurable Cross-slot Antenna with Inductive Reflector for Electromagnetic Torso Imaging

Darvazehban, Amin, Rezaeieh, Sasan Ahdi, Manoochehri, Omid and Abbosh, Amin (2019). Two-Dimensional Pattern-Reconfigurable Cross-slot Antenna with Inductive Reflector for Electromagnetic Torso Imaging. IEEE Transactions on Antennas and Propagation, 68 (2) 8839710, 1-1. doi: 10.1109/tap.2019.2940617

Two-Dimensional Pattern-Reconfigurable Cross-slot Antenna with Inductive Reflector for Electromagnetic Torso Imaging

2019

Journal Article

Pattern reconfigurable magneto-electric antenna utilizing asymmetrical dipole arms

Ahdi Rezaeieh, Sasan and Abbosh, Amin M. (2019). Pattern reconfigurable magneto-electric antenna utilizing asymmetrical dipole arms. IEEE Antennas and Wireless Propagation Letters, 18 (4) 8651301, 1-1. doi: 10.1109/lawp.2019.2901264

Pattern reconfigurable magneto-electric antenna utilizing asymmetrical dipole arms

2019

Conference Publication

Three-dimensional electromagnetic torso imaging using reconfigurable antennas

Zamani, Ali, Darvazehban, Amin, Ahdi Rezaeieh, Sasan and Abbosh, Amin (2019). Three-dimensional electromagnetic torso imaging using reconfigurable antennas. European Conference on Antennas and Propagation (EuCAP), Krakow, Poland, 31 March-5 April 2019. New York, NY, United States: Institute of Electrical and Electronics Engineers.

Three-dimensional electromagnetic torso imaging using reconfigurable antennas

2019

Conference Publication

Mutual coupling reduction in wideband electromagnetic medical imaging antenna array using compact electromagnetic band gap

Alqadami, Abdulrahman S. M., Nguyen-Trong, Nghia, Bialkowski, Konstanty and Abbosh, Amin (2019). Mutual coupling reduction in wideband electromagnetic medical imaging antenna array using compact electromagnetic band gap. 2019 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, Atlanta, GA, United States, 7 - 12 July 2019. Piscataway, NJ, United States: Institute of Electrical and Electronics Engineers. doi: 10.1109/APUSNCURSINRSM.2019.8889175

Mutual coupling reduction in wideband electromagnetic medical imaging antenna array using compact electromagnetic band gap

2019

Journal Article

Pattern Reconfigurable Metasurface Antenna for Electromagnetic Torso Imaging

Darvazehban, Amin, Rezaeieh, Sasan Ahdi, Zamani, Ali and Abbosh, Amin M. (2019). Pattern Reconfigurable Metasurface Antenna for Electromagnetic Torso Imaging. IEEE Transactions on Antennas and Propagation, 67 (8) 8718481, 1-1. doi: 10.1109/tap.2019.2916576

Pattern Reconfigurable Metasurface Antenna for Electromagnetic Torso Imaging

2019

Conference Publication

Design of a millimeter-wave near-field probe for early-stage skin cancer detection

Mansutti, Giulia, Mobashsher, Ahmed Toaha and Abbosh, Amin (2019). Design of a millimeter-wave near-field probe for early-stage skin cancer detection. 13th European Conference on Antennas and Propagation (EuCAP 2019), Krakow, Poland, 31 March - 5 April 2019. New York, NY, United States: Institute of Electrical and Electronics Engineers (IEEE).

Design of a millimeter-wave near-field probe for early-stage skin cancer detection

2019

Journal Article

MIMO antenna system for multi-band millimeter-wave 5G and wideband 4G mobile communications

Al Abbas, Emad, Ikram, Muhammad, Mobashsher, Ahmed Toaha and Abbosh, Amin (2019). MIMO antenna system for multi-band millimeter-wave 5G and wideband 4G mobile communications. IEEE Access, 7 8930543, 181916-181923. doi: 10.1109/access.2019.2958897

MIMO antenna system for multi-band millimeter-wave 5G and wideband 4G mobile communications

2018

Journal Article

Pattern reconfigurable wideband loop antenna for thorax imaging

Rezaeieh, Sasan Ahdi, Zamani, Ali and Abbosh, Amin M. (2018). Pattern reconfigurable wideband loop antenna for thorax imaging. IEEE Transactions on Antennas and Propagation, 67 (8) 8585052, 5104-5114. doi: 10.1109/TAP.2018.2889164

Pattern reconfigurable wideband loop antenna for thorax imaging

2018

Journal Article

Simple design procedure of a broadband circularly polarized slot monopole antenna assisted by characteristic mode analysis

Tran, Huy Hung, Nguyen-Trong, Nghia and Abbosh, Amin M. (2018). Simple design procedure of a broadband circularly polarized slot monopole antenna assisted by characteristic mode analysis. IEEE Access, 6 8565847, 78386-78393. doi: 10.1109/ACCESS.2018.2885015

Simple design procedure of a broadband circularly polarized slot monopole antenna assisted by characteristic mode analysis

2018

Journal Article

Improved communications in underground mines using reconfigurable antennas

Kunsei, Herman, Bialkowski, Konstanty S., Alam, Md Shahidul and Abbosh, Amin M. (2018). Improved communications in underground mines using reconfigurable antennas. IEEE Transactions on Antennas and Propagation, 66 (12) 8457314, 7505-7510. doi: 10.1109/TAP.2018.2869250

Improved communications in underground mines using reconfigurable antennas

2018

Journal Article

Hyperwideband microwave crossover using bridged suspended substrate line configuration

Wang, Yifan, Oliver, Erin, Nguyen-Trong, Nghia, Ness, John and Abbosh, Amin M. (2018). Hyperwideband microwave crossover using bridged suspended substrate line configuration. IEEE Microwave and Wireless Components Letters, 28 (12) 8501553, 1083-1085. doi: 10.1109/lmwc.2018.2874503

Hyperwideband microwave crossover using bridged suspended substrate line configuration

2018

Journal Article

Wearable electromagnetic head imaging system using flexible wideband antenna array based on polymer technology for brain stroke diagnosis

Alqadami, Abdulrahman S. M., Bialkowski, Konstanty S., Mobashsher, Ahmed Toaha and Abbosh, Amin M. (2018). Wearable electromagnetic head imaging system using flexible wideband antenna array based on polymer technology for brain stroke diagnosis. IEEE Transactions on Biomedical Circuits and Systems, 13 (1) 8509204, 124-134. doi: 10.1109/TBCAS.2018.2878057

Wearable electromagnetic head imaging system using flexible wideband antenna array based on polymer technology for brain stroke diagnosis

Funding

Current funding

  • 2025 - 2029
    Realtime Three-Dimensional Near-Field Microwave Imaging System
    ARC Discovery Projects
    Open grant
  • 2025 - 2029
    Minimally-Invasive Electromagnetic Haemoglobin Sensing
    NHMRC IDEAS Grants
    Open grant
  • 2025 - 2027
    Portable Electromagnetic Torso Scanner
    NHMRC IDEAS Grants
    Open grant
  • 2024 - 2027
    Next-Generation Solvers for Complex Microwave Engineering Problems
    ARC Discovery Projects
    Open grant
  • 2020 - 2028
    Microwave and Photonic Engineering and Applied Electromagnetics
    EM Solutions Pty Ltd
    Open grant

Past funding

  • 2021 - 2022
    Electromagnetic Scanner for Hepatic Steatosis Detection, Classification and Monitoring
    EMvision Medical Devices Ltd
    Open grant
  • 2020 - 2024
    Compact Millimeter-Wave Terminal for LEO Satellite Communications
    ARC Linkage Projects
    Open grant
  • 2019 - 2022
    Microwave Detection of Structural Degradations in Maritime Industry
    ARC Linkage Projects
    Open grant
  • 2019 - 2020
    Development Dielectric Sensor System on Intelligent Amphirols for Mud Farming Tailings Facilities
    Innovation Connections
    Open grant
  • 2018 - 2022
    High Quality and Robust Energy Conversion Systems for Distribution Networks
    ARC Linkage Projects
    Open grant
  • 2018 - 2019
    Broadband human tissue measurements enabled by a new triaxial near field probe
    Keysight Technologies Inc
    Open grant
  • 2018 - 2021
    Engineering the next generation of portable microwave scanners
    ARC Discovery Projects
    Open grant
  • 2018
    Imaging in the nano-scale age: terahertz and millimetre wave microanalysis
    UQ Major Equipment and Infrastructure
    Open grant
  • 2018 - 2022
    Portable brain scanner for early stroke detection and monitoring (CRC-P administered by EMVisions Medical Devices Ltd)
    EMvision Medical Devices Ltd
    Open grant
  • 2017 - 2018
    Portable microwave brain scanner
    UniQuest Pty Ltd
    Open grant
  • 2017 - 2020
    Positive Vehicle Identification with the use of smart sensors, a Transport and Population Research Network project
    UQ Vice-Chancellor's Strategic Initiatives
    Open grant
  • 2017 - 2018
    Development of millimetre-wave non-destructive testing system for marine infrastructure
    Innovation Connections
    Open grant
  • 2017 - 2018
    RFID Licence Plate Antenna
    Innovation Connections
    Open grant
  • 2017
    Advanced Pulsed Power: an emerging technology for science and engineering systems
    UQ Major Equipment and Infrastructure
    Open grant
  • 2016 - 2019
    In-Road Microwave System for Traffic Monitoring and Vehicle Identification
    ARC Linkage Projects
    Open grant
  • 2016 - 2019
    Reconfigurable Antennas for Satellite On-The-Move Communications
    ARC Linkage Projects
    Open grant
  • 2016 - 2017
    Road Curtain Intelligent Sensor
    Research Connections
    Open grant
  • 2016
    Millimetre Waves for Imaging and Sensing
    UQ Major Equipment and Infrastructure
    Open grant
  • 2015 - 2017
    Microwave Head Monitor Using Compressed Sensing and Differential Techniques
    ARC Discovery Projects
    Open grant
  • 2015 - 2017
    Portable Microwave Imaging Technology Using Reconfigurable Radar
    ARC Discovery Projects
    Open grant
  • 2014 - 2015
    Road Curtain Radar
    LicenSys Pty Ltd
    Open grant
  • 2014
    Portable Microwave System for Head Imaging and Stroke Detection
    Agilent Technologies Inc
    Open grant
  • 2014 - 2015
    Reconfigurable reflectarray for satellite on-the-move communication terminals
    UQ Collaboration and Industry Engagement Fund - Seed Research Grant
    Open grant
  • 2013 - 2014
    Road Curtain Antenna (Researchers in Business grant with LicenSys Pty Ltd)
    LicenSys Pty Ltd
    Open grant
  • 2012 - 2014
    Portable Microwave Systems for Imaging and Monitoring of the Human Body
    ARC Discovery Projects
    Open grant
  • 2010 - 2013
    Hybrid Imaging System for Breast Cancer Detection
    ARC Future Fellowships
    Open grant
  • 2010 - 2012
    Microwave System for Early Breast Cancer Detection Employing Ultra Wideband Conformal Array Antenna
    ARC Discovery Projects
    Open grant
  • 2009 - 2011
    Design of Planar Microwave Components and Sub-systems for Wideband Applications
    ARC Discovery Projects
    Open grant
  • 2007 - 2008
    Investigations into Multi-Antenna Wideband Systems for Future Wireless Communications
    UQ Early Career Researcher
    Open grant
  • 2007 - 2009
    Microwave Imaging System for Breast Cancer Detection Using Ultra Wideband Technology
    UQ Postdoctoral Research Fellowship
    Open grant

Supervision

Availability

Professor Amin Abbosh is:
Available for supervision

Before you email them, read our advice on how to contact a supervisor.

Available projects

  • Multi-channel, multi-frequency measurements systems for medical electromagnetic imaging

    Advances in signal processing platforms and microwave signal capture have allowed for new architectures of sensors to be developed. Specifically, both the ability to capture higher bandwidth and higher dynamic range as well as the associated processing hardware being capable of more calculations per second.

    Harnessing these new capabilities requires a combination of hardware and software processing, and will enable the development of more and lower-cost medical electromagnetic imaging systems.

    A working knowledge of signal processing and electromagnetics is necessary

  • Wideband Medical Electromagnetic Sensors

    Medical Electromagnetic imaging techniques have the potential to be used in the diagnosis and monitoring of different diseases. To that end, electromagnetic sensors that operate efficiently at their near-field and within the frequency of interest should be properly designed to generate and receive utilized electromagnetic waves. This project will aim at designing compact EM sensors, using different techniques such as open-ended coaxial cables or waveguides, substrate-integrated waveguides, or any suitable near-field antenna. Those sensors should have wideband performance and thus the potential to be used as a portable medical probe or scanner.

    The successful candidate should have a strong background in (a) electromagnetic radiation, and (b) microwave engineering

  • Computationally efficient electromagnetic solver using AI

    With the fast progress in forming more complex electromagnetic (EM) structures with many design parameters and large demand for real-time solutions to complex EM problems in embedded devices, the need for a new EM-solving approach that can keep pace with the computational requirements has become more imminent. This project aims at developing a novel computationally efficient EM solver which is implementable on systems with limited resources using a physics-informed sparse deep neural network that solves partial differential forms of Maxwell’s equations without relying on other computational EM solver solutions. The successful candidate will specifically develop signal processing and machine learning algorithms for a real-time electromagnetic solver.

    The successful candidate should have a strong background in Artificial Intelligence & a working knowledge of electromagnetics and signal analysis

  • Reconfigurable Microwave Devices using Smart Materials

    This project aims at utilizing the electrodynamic properties of artificial materials in designing reconfigurable, or tunable, electromagnetic devices at the microwave frequency band, such as antennas, filters, couplers, etc. The reconfigurability might aim at controlling the center operating frequency, bandwidth, radiation pattern or direction, etc. The selected candidate will investigate the effect of different properties of those materials on the electromagnetic reconfigurability of microwave devices.

    The successful candidate should have a strong background in (a) electromagnetics and microwave engineering, and (b) measurement techniques of dielectric properties of materials

  • Electromagnetic Techniques for Brain Function Monitoring

    If you require a scholarship from me to do your PhD with my team, I will only support your application if you (1) have a high GPA and sound research record (published papers in decent journals, such as IEEE, IET etc), and (2) graduated from a good university. Please note that at UQ, we do not accept a research record of papers in unaccredited journals.

    If you are interested, please send me an email that includes: Your GPA, publication record (published and accepted papers in only ISI-accredited journals), patents, and awards (with documented proof of those). If you do not include all that information, we will not respond to your email.

  • Tunable microwave devices (filters, power dividers, couplers, etc)

    If you require a scholarship from me to do your PhD with my team, I will only support your application if you (1) have a high GPA and sound research record (published papers in decent journals, such as IEEE, IET etc), and (2) graduated from a good university. Please note that at UQ, we do not accept a research record of papers in unaccredited journals.

    If you are interested, please send me an email that includes: Your GPA, publication record (published and accepted papers in only ISI accredited journals), patents and awards (with documented proof of those). If you do not include all that information, we will not respond to your email.

  • Microwave Microscopy for Medical Applications

    If you require a scholarship from me to do your PhD with my team, I will only support your application if you (1) have a high GPA and sound research record (published papers in decent journals, such as IEEE, IET etc), and (2) graduated from a good university. Please note that at UQ, we do not accept a research record of papers in unaccredited journals.

    If you are interested, please send me an email that includes: Your GPA, publication record (published and accepted papers in only ISI accredited journals), patents and awards (with documented proof of those). If you do not include all that information, we will not respond to your email.

  • Reconfigurable Antennas

    If you require a scholarship from me to do your PhD with my team, I will only support your application if you (1) have a high GPA and sound research record (published papers in decent journals, such as IEEE, IET etc), and (2) graduated from a good university. Please note that at UQ, we do not accept a research record of papers in unaccredited journals.

    If you are interested, please send me an email that includes: Your GPA, publication record (published and accepted papers in only ISI accredited journals), patents and awards (with documented proof of those). If you do not include all that information, we will not respond to your email.

  • Millimeter-Wave Techniques for Skin Cancer Detection

    If you require a scholarship from me to do your PhD with my team, I will only support your application if you (1) have a high GPA and sound research record (published papers in decent journals, such as IEEE, IET etc), and (2) graduated from a good university. Please note that at UQ, we do not accept a research record of papers in unaccredited journals.

    If you are interested, please send me an email that includes: Your GPA, publication record (published and accepted papers in only ISI accredited journals), patents and awards (with documented proof of those). If you do not include all that information, we will not respond to your email.

  • Contactless Head Monitor for Newborn Babies

    If you require a scholarship from me to do your PhD with my team, I will only support your application if you (1) have a high GPA and sound research record (published papers in decent journals, such as IEEE, IET etc), and (2) graduated from a good university. Please note that at UQ, we do not accept a research record of papers in unaccredited journals.

    If you are interested, please send me an email that includes: Your GPA, publication record (published and accepted papers in only ISI accredited journals), patents and awards (with documented proof of those). If you do not include all that information, we will not respond to your email.

  • Antenna beamforming for 5G/6G mobile communication

    If you require a scholarship from me to do your PhD with my team, I will only support your application if you (1) have a high GPA and sound research record (published papers in decent journals, such as IEEE, IET etc), and (2) graduated from a good university. Please note that at UQ, we do not accept a research record of papers in unaccredited journals.

    If you are interested, please send me an email that includes: Your GPA, publication record (published and accepted papers in only ISI accredited journals), patents and awards (with documented proof of those). If you do not include all that information, we will not respond to your email.

  • Multi-channel, multi-frequency measurements systems for medical electromagnetic imaging

    Advances in signal processing platforms and microwave signal capture have allowed for new architectures of sensors to be developed. Specifically, both the ability to capture higher bandwidth and higher dynamic range as well as the associated processing hardware being capable of more calculations per second.

    Harnessing these new capabilities requires a combination of hardware and software processing, and will enable the development of more and lower-cost medical electromagnetic imaging systems.

    A working knowledge of signal processing and electromagnetics is necessary

  • Wideband Medical Electromagnetic Sensors

    Medical Electromagnetic imaging techniques have the potential to be used in the diagnosis and monitoring of different diseases. To that end, electromagnetic sensors that operate efficiently at their near-field and within the frequency of interest should be properly designed to generate and receive utilized electromagnetic waves. This project will aim at designing compact EM sensors, using different techniques such as open-ended coaxial cables or waveguides, substrate-integrated waveguides, or any suitable near-field antenna. Those sensors should have wideband performance and thus the potential to be used as a portable medical probe or scanner.

    The successful candidate should have a strong background in (a) electromagnetic radiation, and (b) microwave engineering

  • Computationally efficient electromagnetic solver using AI

    With the fast progress in forming more complex electromagnetic (EM) structures with many design parameters and large demand for real-time solutions to complex EM problems in embedded devices, the need for a new EM-solving approach that can keep pace with the computational requirements has become more imminent. This project aims at developing a novel computationally efficient EM solver which is implementable on systems with limited resources using a physics-informed sparse deep neural network that solves partial differential forms of Maxwell’s equations without relying on other computational EM solver solutions. The successful candidate will specifically develop signal processing and machine learning algorithms for a real-time electromagnetic solver.

    The successful candidate should have a strong background in Artificial Intelligence & a working knowledge of electromagnetics and signal analysis

  • Reconfigurable Microwave Devices using Smart Materials

    This project aims at utilizing the electrodynamic properties of artificial materials in designing reconfigurable, or tunable, electromagnetic devices at the microwave frequency band, such as antennas, filters, couplers, etc. The reconfigurability might aim at controlling the center operating frequency, bandwidth, radiation pattern or direction, etc. The selected candidate will investigate the effect of different properties of those materials on the electromagnetic reconfigurability of microwave devices.

    The successful candidate should have a strong background in (a) electromagnetics and microwave engineering, and (b) measurement techniques of dielectric properties of materials

  • Millimeter-Wave Techniques for Skin Cancer Detection

    If you require a scholarship from me to do your PhD with my team, I will only support your application if you (1) have a high GPA and sound research record (published papers in decent journals, such as IEEE, IET etc), and (2) graduated from a good university. Please note that at UQ, we do not accept a research record of papers in unaccredited journals.

    If you are interested, please send me an email that includes: Your GPA, publication record (published and accepted papers in only ISI accredited journals), patents and awards (with documented proof of those). If you do not include all that information, we will not respond to your email.

  • Electromagnetic Techniques for Brain Function Monitoring

    If you require a scholarship from me to do your PhD with my team, I will only support your application if you (1) have a high GPA and sound research record (published papers in decent journals, such as IEEE, IET etc), and (2) graduated from a good university. Please note that at UQ, we do not accept a research record of papers in unaccredited journals.

    If you are interested, please send me an email that includes: Your GPA, publication record (published and accepted papers in only ISI-accredited journals), patents, and awards (with documented proof of those). If you do not include all that information, we will not respond to your email.

  • Tunable microwave devices (filters, power dividers, couplers, etc)

    If you require a scholarship from me to do your PhD with my team, I will only support your application if you (1) have a high GPA and sound research record (published papers in decent journals, such as IEEE, IET etc), and (2) graduated from a good university. Please note that at UQ, we do not accept a research record of papers in unaccredited journals.

    If you are interested, please send me an email that includes: Your GPA, publication record (published and accepted papers in only ISI accredited journals), patents and awards (with documented proof of those). If you do not include all that information, we will not respond to your email.

  • Microwave Microscopy for Medical Applications

    If you require a scholarship from me to do your PhD with my team, I will only support your application if you (1) have a high GPA and sound research record (published papers in decent journals, such as IEEE, IET etc), and (2) graduated from a good university. Please note that at UQ, we do not accept a research record of papers in unaccredited journals.

    If you are interested, please send me an email that includes: Your GPA, publication record (published and accepted papers in only ISI accredited journals), patents and awards (with documented proof of those). If you do not include all that information, we will not respond to your email.

  • Reconfigurable Antennas

    If you require a scholarship from me to do your PhD with my team, I will only support your application if you (1) have a high GPA and sound research record (published papers in decent journals, such as IEEE, IET etc), and (2) graduated from a good university. Please note that at UQ, we do not accept a research record of papers in unaccredited journals.

    If you are interested, please send me an email that includes: Your GPA, publication record (published and accepted papers in only ISI accredited journals), patents and awards (with documented proof of those). If you do not include all that information, we will not respond to your email.

  • Contactless Head Monitor for Newborn Babies

    If you require a scholarship from me to do your PhD with my team, I will only support your application if you (1) have a high GPA and sound research record (published papers in decent journals, such as IEEE, IET etc), and (2) graduated from a good university. Please note that at UQ, we do not accept a research record of papers in unaccredited journals.

    If you are interested, please send me an email that includes: Your GPA, publication record (published and accepted papers in only ISI accredited journals), patents and awards (with documented proof of those). If you do not include all that information, we will not respond to your email.

  • Antenna beamforming for 5G/6G mobile communication

    If you require a scholarship from me to do your PhD with my team, I will only support your application if you (1) have a high GPA and sound research record (published papers in decent journals, such as IEEE, IET etc), and (2) graduated from a good university. Please note that at UQ, we do not accept a research record of papers in unaccredited journals.

    If you are interested, please send me an email that includes: Your GPA, publication record (published and accepted papers in only ISI accredited journals), patents and awards (with documented proof of those). If you do not include all that information, we will not respond to your email.

  • Electromagnetic Solver Using Physics - Guided Deep Neural Network

    This project aims to develop a physics-guided, data-driven method for solving complex electromagnetic problems efficiently. The focus of this project will be on medical microwave imaging.

Supervision history

Current supervision

Completed supervision

Media

Enquiries

Contact Professor Amin Abbosh directly for media enquiries about:

  • Antennas
  • Microwave Medical Imaging
  • Microwave Passive Devices
  • Telecommunications

Need help?

For help with finding experts, story ideas and media enquiries, contact our Media team:

communications@uq.edu.au