|
2023 Conference Publication Enhancing biocompatibility, antibacterial characteristics and corrosion rate of pure zinc by surface acid etchingXiang, Enmao, Cerezo, Maria Natividad Gomez, Ali, Yahia, Ramachandra, Srinivas Sulugodu, Yang, Nan, Dargusch, Matthew, Moran, Corey, Ivanovskii, Saso and Hay, Abdalla Abdal (2023). Enhancing biocompatibility, antibacterial characteristics and corrosion rate of pure zinc by surface acid etching. European Chapter of the Tissue Engineering and Regenerative Medicine International Society (TERMIS), Manchester, United Kingdom, 28 - 31 March 2023. New Rochelle, NY, United States: Mary Ann Liebert. doi: 10.1089/ten.tea.2023.29043.abstract |
|
2020 Conference Publication Fabrication of highly porous titanium scaffolds using metal injection moulding and space holderDehghan-Manshadi, A., StJohn, D. H., Dargusch, M. S. and Qian, M. (2020). Fabrication of highly porous titanium scaffolds using metal injection moulding and space holder. European Powder Metallurgy Congress and Exhibition (Euro PM 2018), Bilbao, Spain, 14-18 October 2018. Brussels, Belgium: European Powder Metallurgy Association (EPMA). |
|
2020 Conference Publication Revealing the mechanisms of grain nucleation and formation during additive manufacturingBermingham, Michael, StJohn, David, Easton, Mark, Yuan, Lang and Dargusch, Matthew (2020). Revealing the mechanisms of grain nucleation and formation during additive manufacturing. 2nd Asia-Pacific International Conference on Additive Manufacturing (APICAM 2019), Melbourne, VIC Australia, 1 - 3 July 2019. New York, NY, United States: Springer. doi: 10.1007/s11837-020-04019-5 |
|
2019 Conference Publication Cellular automation finite element modeling of the evolution of the as-cast microstructure of an ultrasonically treated al-2cu alloyWang, Gui, Croaker, Paul, Dargusch, Matthew, McGuckin, Damian and StJohn, David (2019). Cellular automation finite element modeling of the evolution of the as-cast microstructure of an ultrasonically treated al-2cu alloy. Light Metals Symposium held at the TMS Annual Meeting and Exhibition, 2019, San Antonio, TX, March 10, 2019-March 14, 2019. CHAM: Springer International Publishing. doi: 10.1007/978-3-030-05864-7_205 |
|
2019 Conference Publication Mechanisms of grain formation during ultrasonic solidification of commercial purity magnesiumNagasivamuni, B., Wang, Gui, St John, David H. and Dargusch, Matthew S. (2019). Mechanisms of grain formation during ultrasonic solidification of commercial purity magnesium. Light Metals Symposium, TMS Annual Meeting and Exhibition, San Antonio, TX, United States, 10-14 March 2019. Cham, Switzerland: Springer International. doi: 10.1007/978-3-030-05864-7_200 |
|
2018 Conference Publication Material perspectives of the dental implants: A reviewWang, Gui, Dargusch, Matthew and Doan, Nghiem (2018). Material perspectives of the dental implants: A review. 6th International Conference on the Development of Biomedical Engineering in Vietnam, BME 2016, Ho Chi Minh, Vietnam, 27-29 June 2016. Singapore, Singapore: Springer Verlag. doi: 10.1007/978-981-10-4361-1_76 |
|
2018 Conference Publication The challenges associated with the formation of equiaxed grains during additive manufacturing of titanium alloysStJohn, David H., McDonald, Stuart D., Bermingham, Michael J., Mereddy, Sri, Prasad, Arvind and Dargusch, Matthew (2018). The challenges associated with the formation of equiaxed grains during additive manufacturing of titanium alloys. 4th International Conference on Powder Metallurgy of Titanium, PMTi 2017, Xian, China, 8-10 September 2017. Trans Tech Publications Ltd. doi: 10.4028/www.scientific.net/KEM.770.155 |
|
2017 Conference Publication Influence of flash treatment on pseudoelastic behaviour of biomedical Ti-25Nb-3Zr-3Mo-2Sn alloyZhu, Suming, Zhu, Yuman, Dargusch, Matthew and Nie, Jian-Feng (2017). Influence of flash treatment on pseudoelastic behaviour of biomedical Ti-25Nb-3Zr-3Mo-2Sn alloy. 9th International Conference on Processing and Manufacturing of Advanced Materials, THERMEC 2016, Graz Austria, 29 May - 3 June 2016. Pfaffikon, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.879.1375 |
|
2016 Conference Publication Grain Refinement of an Al-2 wt%Cu Alloy by Al3Ti1B Master Alloy and Ultrasonic TreatmentWang, E. Q., Wang, G., Dargusch, M. S., Qian, M., Eskin, D. G. and StJohn, D. H. (2016). Grain Refinement of an Al-2 wt%Cu Alloy by Al3Ti1B Master Alloy and Ultrasonic Treatment. 4th International Conference on Advances in Solidification Processes, ICASP 2014, Windsor, United Kingdom, 8 - 11 July 2014. Bristol, United Kingdom: Institute of Physics Publishing. doi: 10.1088/1757-899X/117/1/012050 |
|
2016 Conference Publication Effect of Ultrasonic Treatment on The As-Cast Grain Structure during The Solidification of An Al-2Cu AlloyWang, Gui, Dargusch, Matthew S. and St John, David H. (2016). Effect of Ultrasonic Treatment on The As-Cast Grain Structure during The Solidification of An Al-2Cu Alloy. The Ninth Pacific Rim International Conference on Advanced Materials and Processing, Kyoto, Japan, 1-5 August 2016. |
|
2016 Conference Publication Grain refinement of Al-Si hypoeutectic alloys by Al3Ti1B master alloy and ultrasonic treatmentWang, Gui, Wang, Eric Qiang, Prasad, Arvind, Dargusch, Matthew and StJohn, David H. (2016). Grain refinement of Al-Si hypoeutectic alloys by Al3Ti1B master alloy and ultrasonic treatment. Shape Casting: 6th International Symposium, Nashville, Tennessee, United States, 14-18 February 2016. Hoboken, NJ, United States: John Wiley & Sons. doi: 10.1002/9781119274865.ch18 |
|
2016 Conference Publication Progressive matrix cracking induced delamination: A comparison of finite element modelling techniquesReiner, J., Veidt, M., Dargusch, M. and Gross, L. (2016). Progressive matrix cracking induced delamination: A comparison of finite element modelling techniques. 17th European Conference on Composite Materials, ECCM 2016, Munich, Germany, 26 - 30 June 2016. Munich, Germany: European Conference on Composite Materials, ECCM. |
|
2015 Conference Publication Selection of densification strain to predict dynamic crushing stress at high impact velocity of ALPORAS aluminium foamYahaya, M. A., Ruan, R., Lu, G., Dargusch, M. S. and Yu, T. X. (2015). Selection of densification strain to predict dynamic crushing stress at high impact velocity of ALPORAS aluminium foam. 12th Asia-Pacific Conference on Engineering Plasticity and Its Application, AEPA 2014, Kaohsiung, Taiwan, 1-5 September 2014. Pfaffikon, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/KEM.626.383 |
|
2014 Conference Publication Comparison of endmill tool coating performance during machining of Ti6Al4V alloyPalanisamy, S., Rahman Rashid, R. A., Brandt, M., Sun, S. and Dargusch, M. S. (2014). Comparison of endmill tool coating performance during machining of Ti6Al4V alloy. 5th International Conference on Material and Manufacturing Technology (ICMMT 2014), Kuala Lumpur, Malaysia, 8-9 May 2014. Pfaffikon, Switzerland: Scientific.Net. doi: 10.4028/www.scientific.net/AMR.974.126 |
|
2014 Conference Publication Laser assisted machining of Ti10V2Fe3Al and Ti6Cr5Mo5V4Al β titanium alloysRahman Rashid, R. A., Sun, S., Palanisamy, S. and Dargusch, M. S. (2014). Laser assisted machining of Ti10V2Fe3Al and Ti6Cr5Mo5V4Al β titanium alloys. 5th International Conference on Material and Manufacturing Technology (ICMMT 2014), Kuala Lumpur, Malaysia, 8-9 May 2014. Pfaffikon, Switzerland: Scientific.Net. doi: 10.4028/www.scientific.net/AMR.974.121 |
|
2014 Conference Publication A computational investigation of failure modes in fibre metal laminatesReiner, Johannes, Veidt, Martin, Dargusch, Matthew and Gross, Lutz (2014). A computational investigation of failure modes in fibre metal laminates. ACAM 8: 8th Australasian Congress on Applied Mechanics, Melbourne, VIC, Australia, 23-26 November, 2014. Barton, ACT, Australia: Engineers Australia. |
|
2014 Conference Publication Tool life study of coated/uncoated carbide inserts during turning of Ti6Al4VPalanisamy, S., Rahman Rashid, R. A., Brandt, M. and Dargusch, M. S. (2014). Tool life study of coated/uncoated carbide inserts during turning of Ti6Al4V. 5th International Conference on Material and Manufacturing Technology (ICMMT 2014), Kuala Lumpur, Malaysia, 8-9 May 2014. Pfaffikon, Switzerland: Scientific.Net. doi: 10.4028/www.scientific.net/AMR.974.136 |
|
2013 Conference Publication FEA modelling of cutting force and chip formation in thermally assisted machining of Ti6Al4V alloyXi, Yao, Bermingham, Michael, Wang, Gui and Dargusch, Matthew (2013). FEA modelling of cutting force and chip formation in thermally assisted machining of Ti6Al4V alloy. LMT 2013: 6th International Light Metals Technology Conference, Old Windsor, UK, 24-26 July, 2013. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.765.343 |
|
2013 Conference Publication Comparison of phantom node and extended finite element method for damage evaluation in composite laminatesJohannes Reiner, Veidt, Martin, Dargusch, Matthew S. and Gross, L. (2013). Comparison of phantom node and extended finite element method for damage evaluation in composite laminates. 5th Asia Pacific Congress on Computational Mechanics (APCOM V) and the 4th International Symposium on Computational Mechanics (ISCM VI), Singapore, 11-13 December 2013. Barcelona, Spain: International Association for Computational Mechanics. |
|
2013 Conference Publication Experimental investigation of various chip parameters during machining of the Ti25nb3mo3zr2sn beta titanium alloyRashid, Raham Rashid Rahman, Sun, C., Wang, Gui and Dargusch, Matthew S. (2013). Experimental investigation of various chip parameters during machining of the Ti25nb3mo3zr2sn beta titanium alloy. Stafa-Zurich, 8712 Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/AMR.622-623.366 |
