Skip to menu Skip to content Skip to footer

2016

Journal Article

Hydrogen concentration in dual-phase (DP) and quenched and partitioned (Q&P) advanced high-strength steels (AHSS) under simulated service conditions compared with cathodic charging conditions

Liu, Qinglong, Zhou, Qingjun, Venezuela, Jeffrey, Zhang, Mingxing and Atrens, Andrej (2016). Hydrogen concentration in dual-phase (DP) and quenched and partitioned (Q&P) advanced high-strength steels (AHSS) under simulated service conditions compared with cathodic charging conditions. Advanced Engineering Materials, 18 (9), 1588-1599. doi: 10.1002/adem.201600217

Hydrogen concentration in dual-phase (DP) and quenched and partitioned (Q&P) advanced high-strength steels (AHSS) under simulated service conditions compared with cathodic charging conditions

2016

Journal Article

Solidification of Mg-Zn-Y alloys at 6 GPa pressure: nanostructure, phases formed, and their stability

Zhou, Haitao, Liu, Keming, Zhang, Li, Atrens, Andrej, Yu, Jiuming and Li, Xiaolong (2016). Solidification of Mg-Zn-Y alloys at 6 GPa pressure: nanostructure, phases formed, and their stability. Journal of Materials Engineering and Performance, 25 (9), 3830-3837. doi: 10.1007/s11665-016-2182-5

Solidification of Mg-Zn-Y alloys at 6 GPa pressure: nanostructure, phases formed, and their stability

2016

Journal Article

A review on hot tearing of magnesium alloys

Song, Jiangfeng, Pan, Fusheng, Jiang, Bin, Atrens, Andrej, Zhang, Mining-X. and Lu, Yun (2016). A review on hot tearing of magnesium alloys. Journal of Magnesium and Alloys, 4 (3), 151-172. doi: 10.1016/j.jma.2016.08.003

A review on hot tearing of magnesium alloys

2016

Journal Article

Influence of surface condition on the corrosion of ultra-high-purity Mg alloy wire

Johnston, Sean, Shi, Zhiming, Dargusch, Matthew S. and Atrens, Andrej (2016). Influence of surface condition on the corrosion of ultra-high-purity Mg alloy wire. Corrosion Science, 108, 66-75. doi: 10.1016/j.corsci.2016.03.007

Influence of surface condition on the corrosion of ultra-high-purity Mg alloy wire

2016

Journal Article

A review of hydrogen embrittlement of martensitic advanced high-strength steels

Venezuela, Jeffrey, Liu, Qinglong, Zhang, Mingxing, Zhou, Qingjun and Atrens, Andrej (2016). A review of hydrogen embrittlement of martensitic advanced high-strength steels. Corrosion Reviews, 34 (3), 153-186. doi: 10.1515/corrrev-2016-0006

A review of hydrogen embrittlement of martensitic advanced high-strength steels

2016

Journal Article

A review of the influence of hydrogen on the mechanical properties of DP, TRIP, and TWIP advanced high-strength steels for auto construction

Liu, Qinglong, Zhou, Qingjun, Venezuela, Jeffrey, Zhang, Mingxing, Wang, Jianqiu and Atrens, Andrej (2016). A review of the influence of hydrogen on the mechanical properties of DP, TRIP, and TWIP advanced high-strength steels for auto construction. Corrosion Reviews, 34 (3), 127-152. doi: 10.1515/corrrev-2015-0083

A review of the influence of hydrogen on the mechanical properties of DP, TRIP, and TWIP advanced high-strength steels for auto construction

2016

Journal Article

Influence of high pressure during solidification on the microstructure and strength of Mg-Zn-Y alloys

Zhou, Haitao, Liu, Keming, Zhang, Li, Lu, Lei, Atrens, Andrej and Lu, Deping (2016). Influence of high pressure during solidification on the microstructure and strength of Mg-Zn-Y alloys. Journal of Rare Earths, 34 (4), 435-440. doi: 10.1016/S1002-0721(16)60045-5

Influence of high pressure during solidification on the microstructure and strength of Mg-Zn-Y alloys

2016

Journal Article

Oxidation resistance of Mg-9Al-1Zn alloys micro-alloyed with Be

Tan, Qiyang, Mo, Ning, Jiang, Bin, Pan, Fusheng, Atrens, Andrej and Zhang, Ming-Xing (2016). Oxidation resistance of Mg-9Al-1Zn alloys micro-alloyed with Be. Scripta Materialia, 115, 38-41. doi: 10.1016/j.scriptamat.2015.12.022

Oxidation resistance of Mg-9Al-1Zn alloys micro-alloyed with Be

2016

Book Chapter

An hydrogen evolution method for the estimation of the corrosion rate of magnesium alloys

Song, Guangling, Atrens, Andrej and St John, David (2016). An hydrogen evolution method for the estimation of the corrosion rate of magnesium alloys. Essential readings in magnesium technology. (pp. 565-572) edited by Suveen N. Mathaudhu, Alan A. Luo, Neale R. Neelameggham, Eric A. Nyberg and Wim H. Sillekens. Cham, Switzerland: Springer. doi: 10.1007/978-3-319-48099-2_90

An hydrogen evolution method for the estimation of the corrosion rate of magnesium alloys

2016

Conference Publication

Assessing hydrogen embrittlement susceptibility of automotive MS-AHSS using the linearly increasing stress test

Venezuela, J., Liu, Q., Zhang, M., Zhou, Q. and Atrens, A. (2016). Assessing hydrogen embrittlement susceptibility of automotive MS-AHSS using the linearly increasing stress test. Annual ACA Conference on Corrosion and Prevention 2016, Auckland, New Zealand, 13 - 16 November 2016. Kerrimuir VIC Australia: Australasian Corrosion Association.

Assessing hydrogen embrittlement susceptibility of automotive MS-AHSS using the linearly increasing stress test

2016

Conference Publication

Hydrogen permeation in dual phase (DP) and quenched and partitioned (Q&P) advanced high strength steels (AHSS) under cathodic charging and simulated service conditions

Liu, Qinglong, Venezuela, Jeffrey, Zhang, Mingxing, Zhou, Qingjun and Atrens, Andrej (2016). Hydrogen permeation in dual phase (DP) and quenched and partitioned (Q&P) advanced high strength steels (AHSS) under cathodic charging and simulated service conditions. EUROCORR 2016, Montpellier, France, 11 - 15 September 2016. Cefracor.

Hydrogen permeation in dual phase (DP) and quenched and partitioned (Q&P) advanced high strength steels (AHSS) under cathodic charging and simulated service conditions

2016

Journal Article

Effect of H3BO3 on corrosion in 0.01 M NaCl solution of the interface between low alloy steel A508 and alloy 52 M

Wang, Siyan, Ming, Hongliang, Ding, Jie, Zhang, Zhiming, Wang, Jianqiu, Han, En-Hou and Atrens, Andrej (2016). Effect of H3BO3 on corrosion in 0.01 M NaCl solution of the interface between low alloy steel A508 and alloy 52 M. Corrosion Science, 102, 469-483. doi: 10.1016/j.corsci.2015.10.040

Effect of H3BO3 on corrosion in 0.01 M NaCl solution of the interface between low alloy steel A508 and alloy 52 M

2015

Journal Article

The influence of pH on the corrosion rate of high-purity Mg, AZ91 and ZE41 in bicarbonate buffered Hanks' solution

Johnston, Sean, Shi, Zhiming and Atrens, Andrej (2015). The influence of pH on the corrosion rate of high-purity Mg, AZ91 and ZE41 in bicarbonate buffered Hanks' solution. Corrosion Science, 101, 182-192. doi: 10.1016/j.corsci.2015.09.018

The influence of pH on the corrosion rate of high-purity Mg, AZ91 and ZE41 in bicarbonate buffered Hanks' solution

2015

Journal Article

Stress corrosion cracking of high-strength AZ31 processed by high-ratio differential speed rolling

Shi, Zhiming, Kim, W. J., Cao, Fuyong, Dargusch, Matthew S. and Atrens, Andrej (2015). Stress corrosion cracking of high-strength AZ31 processed by high-ratio differential speed rolling. Journal of Magnesium and Alloys, 3 (4), 271-282. doi: 10.1016/j.jma.2015.11.006

Stress corrosion cracking of high-strength AZ31 processed by high-ratio differential speed rolling

2015

Journal Article

Effect of Heat Treatment on the Microstructure and Properties of Deformation-Processed Cu-7Cr In Situ Composites

Liu, Keming, Jiang, Zhengyi, Zhou, Haitao, Lu, Deping, Atrens, Andrej and Yang, Yanling (2015). Effect of Heat Treatment on the Microstructure and Properties of Deformation-Processed Cu-7Cr In Situ Composites. Journal of Materials Engineering and Performance, 24 (11), 4340-4345. doi: 10.1007/s11665-015-1747-z

Effect of Heat Treatment on the Microstructure and Properties of Deformation-Processed Cu-7Cr In Situ Composites

2015

Journal Article

Strain rate dependence in the nanoindentation-induced deformation of Mg-Al intermetallic compounds produced by packed powder diffusion coating

Chang, Haiwei, Lu, Mingyuan, Zhang, Mingxing, Atrens, Andrej and Huang, Han (2015). Strain rate dependence in the nanoindentation-induced deformation of Mg-Al intermetallic compounds produced by packed powder diffusion coating. Metals and Materials International, 21 (5), 793-798. doi: 10.1007/s12540-015-5055-9

Strain rate dependence in the nanoindentation-induced deformation of Mg-Al intermetallic compounds produced by packed powder diffusion coating

2015

Journal Article

Reversible hydrogen trapping in a 3.5NiCrMoV medium strength steel

Liu, Qian and Atrens, Andrej (2015). Reversible hydrogen trapping in a 3.5NiCrMoV medium strength steel. Corrosion Science, 96, 112-120. doi: 10.1016/j.corsci.2015.04.011

Reversible hydrogen trapping in a 3.5NiCrMoV medium strength steel

2015

Journal Article

Creation of bimodal porous copper materials by an annealing-electrochemical dealloying approach

Song, T, Yan, M, Shi, Z, Atrens, A and Qian, M (2015). Creation of bimodal porous copper materials by an annealing-electrochemical dealloying approach. Electrochimica Acta, 164, 288-296. doi: 10.1016/j.electacta.2015.02.217

Creation of bimodal porous copper materials by an annealing-electrochemical dealloying approach

2015

Journal Article

Influence of casting porosity on the corrosion behaviour of Mg0.1Si

Cao, Fuyong, Shi, Zhiming, Song, Guang-Ling, Liu, Ming, Dargusch, Matthew S. and Atrens, Andrej (2015). Influence of casting porosity on the corrosion behaviour of Mg0.1Si. Corrosion Science, 94, 255-269. doi: 10.1016/j.corsci.2015.02.002

Influence of casting porosity on the corrosion behaviour of Mg0.1Si

2015

Journal Article

Optimisation of the high velocity oxygen fuel (HVOF) parameters to produce effective corrosion control coatings on AZ91 magnesium alloy

Taltavull, C., Lopez, A. J., Torres, B., Atrens, A. and Rams, J. (2015). Optimisation of the high velocity oxygen fuel (HVOF) parameters to produce effective corrosion control coatings on AZ91 magnesium alloy. Materials and Corrosion, 66 (5), 423-433. doi: 10.1002/maco.201407982

Optimisation of the high velocity oxygen fuel (HVOF) parameters to produce effective corrosion control coatings on AZ91 magnesium alloy