Skip to menu Skip to content Skip to footer

2014

Conference Publication

An analysis of the strength of anisotropic granular assemblies via discrete methods

Galindo Torres, Sergio, Pedroso, Dorival, Williams, David and Muhlhaus, Hans (2014). An analysis of the strength of anisotropic granular assemblies via discrete methods. 1st Australasian Conference on Computational Mechanics (ACCM2013), Sydney, Australia, 3-4 October 2013. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/AMM.553.525

An analysis of the strength of anisotropic granular assemblies via discrete methods

2014

Conference Publication

Savage River rehabilitation project - 2002 to 2013

Williams, D. J., Wilson, G. W., Scott, P. A., Hutcheson, B., Kent, S. and Hughes, A. (2014). Savage River rehabilitation project - 2002 to 2013. Eighth Australian Workshop on Acid Metalliferous Drainage, Adelaide, SA, Australia, 29 April - 2 May 2014. Indooroopilly, QLD, Australia: JKTech.

Savage River rehabilitation project - 2002 to 2013

2013

Journal Article

Strength of non-spherical particles with anisotropic geometries under triaxial and shearing loading configurations

Galindo-Torres, S. A., Pedroso, D. M., Williams, D. J. and Muehlhaus, H. B. (2013). Strength of non-spherical particles with anisotropic geometries under triaxial and shearing loading configurations. Granular Matter, 15 (5), 531-542. doi: 10.1007/s10035-013-0428-6

Strength of non-spherical particles with anisotropic geometries under triaxial and shearing loading configurations

2013

Journal Article

Mixed-mode fracturing of rocks under static and cyclic loading

Eraslan, N. and Williams, D. J. (2013). Mixed-mode fracturing of rocks under static and cyclic loading. Rock Mechanics And Rock Engineering, 46 (5), 1035-1052. doi: 10.1007/s00603-012-0303-5

Mixed-mode fracturing of rocks under static and cyclic loading

2013

Journal Article

Tensile fracture strength of Brisbane tuff by static and cyclic loading tests

Erarslan, N., Alehossein, H. and Williams, D. J. (2013). Tensile fracture strength of Brisbane tuff by static and cyclic loading tests. Rock Mechanics and Rock Engineering, 47 (4), 1135-1151. doi: 10.1007/s00603-013-0469-5

Tensile fracture strength of Brisbane tuff by static and cyclic loading tests

2013

Journal Article

3D elastic solutions for laterally loaded discs: generalised Brazilian and Point Load tests

Serati, Mehdi, Alehossein, Habib and Williams, David J. (2013). 3D elastic solutions for laterally loaded discs: generalised Brazilian and Point Load tests. Rock Mechanics and Rock Engineering, 47 (4), 1087-1101. doi: 10.1007/s00603-013-0449-9

3D elastic solutions for laterally loaded discs: generalised Brazilian and Point Load tests

2013

Journal Article

A Lattice Boltzmann model for studying transient effects during imbibition-drainage cycles in unsaturated soils

Galindo-Torres, S. A., Scheuermann, A., Li, L., Pedroso, D. M. and Williams, D. J. (2013). A Lattice Boltzmann model for studying transient effects during imbibition-drainage cycles in unsaturated soils. Computer Physics Communications, 184 (4), 1086-1093. doi: 10.1016/j.cpc.2012.11.015

A Lattice Boltzmann model for studying transient effects during imbibition-drainage cycles in unsaturated soils

2013

Conference Publication

3D elastic solutions for point load and Brazilian indirect tensile strength tests

Serati, Mehdi, Alehossein, Habib, Erarslan, Nazife and Williams, David J. (2013). 3D elastic solutions for point load and Brazilian indirect tensile strength tests. Eurock 2013: ISRM International Symposium, Wrocław, Poland, 23-26 September 2013. Leiden, Netherland: CRC Press/Balkema. doi: 10.1201/b15683-152

3D elastic solutions for point load and Brazilian indirect tensile strength tests

2013

Conference Publication

Evaluation of common interpolation algorithms for site characterization

Lacey, David, Look, Burt and Williams, David (2013). Evaluation of common interpolation algorithms for site characterization. 2013 GeoCongress, San Diego, United States, March 3-7 2013. Reston, VA, United States: American Society of Civil Engineers. doi: 10.1061/9780784412763.032

Evaluation of common interpolation algorithms for site characterization

2013

Conference Publication

Settlement and shear strength of uncemented coal mine overburden materials placed loose under dry and wet conditions

Williams, D. J. and Kho, A. K. (2013). Settlement and shear strength of uncemented coal mine overburden materials placed loose under dry and wet conditions. ICSMGE 2013: 18th International Conference on Soil Mechanics and Geotechnical Engineering, Paris, France, 2-6 September, 2013. Paris, France: Presses des Ponts.

Settlement and shear strength of uncemented coal mine overburden materials placed loose under dry and wet conditions

2013

Conference Publication

Assessment of relationship between insitu modulus derived from DCP and LFWD testing

Lacey, David, Look, Burt and Williams, David (2013). Assessment of relationship between insitu modulus derived from DCP and LFWD testing. 5iYGEC’13: 5th International Young Geotechnical Engineers' Conference, Marne-la-Vallée, France, 31 August-2 September, 2013. Amsterdam, Netherlands: IOS Press. doi: 10.3233/978-1-61499-297-4-379

Assessment of relationship between insitu modulus derived from DCP and LFWD testing

2013

Conference Publication

Characterising settling and dewatering of slurries of commercial clays and clay-rich coal tailings

Williams, David J., Delport, Timothy M. A. and Whitton, M. Stuart (2013). Characterising settling and dewatering of slurries of commercial clays and clay-rich coal tailings. TMW-2013: Tailings and Mine Waste '13. The 17th International Conference on Tailings and Mine Waste 2013, Banff, AB, Canada, 3-6 November, 2013. Edmonton, AB, Canada: University of Alberta Geotechnical Center.

Characterising settling and dewatering of slurries of commercial clays and clay-rich coal tailings

2013

Conference Publication

Development of a road deterioration model incorporating flooding

Khan, Misbah, Mesbah, Mahmoud, Ferreira, Luis and Williams, David (2013). Development of a road deterioration model incorporating flooding. 36th Australasian Transport Research Forum (2013 ATRF), Brisbane, Australia, 2-4 October 2013.

Development of a road deterioration model incorporating flooding

2013

Journal Article

Laboratory geotechnical characterisation of scalped coalmine spoil

Williams, D. J. and Kho, A. K. (2013). Laboratory geotechnical characterisation of scalped coalmine spoil. Australian Geomechanics Journal, 48 (1), 101-110.

Laboratory geotechnical characterisation of scalped coalmine spoil

2013

Conference Publication

Hydraulic conductivity of compacted clay liners moisture-conditioned and permeated with saline coal seam gas water

Indrawan, I. G. B., Williams, D. J. and Scheuermann, A. (2013). Hydraulic conductivity of compacted clay liners moisture-conditioned and permeated with saline coal seam gas water. ICSMGE 2013: 18th International Conference on Soil Mechanics and Geotechnical Engineering, Paris, France, 2-6 September, 2013. Paris, France: Presses des Ponts.

Hydraulic conductivity of compacted clay liners moisture-conditioned and permeated with saline coal seam gas water

2013

Conference Publication

Stress and displacement monitoring of auger displacement piles

Larisch, M. D., Arnold, M., Uhlig, M., Schwiteilo, E., Williams, D. J. and Scheuermann, A. (2013). Stress and displacement monitoring of auger displacement piles. PILE 2013: International Conference on State of the Art of Pile Foundation and Pile Case Histories, Bandung, West Java, Indonesia, 2-4 June, 2013. Bandung, West Java, Indonesia: Universitas Katolik Parahyangan.

Stress and displacement monitoring of auger displacement piles

2013

Book Chapter

Mine waste rock management

Topal, E. and Williams, D. J. (2013). Mine waste rock management. Australasian mining and metallurgical operating practices. (pp. 76-77) edited by W. J. Rankin. Carlton, VIC, Australia: Australasian Institute of Mining and Metallurgy.

Mine waste rock management

2013

Journal Article

Waste rock dumping optimisation using mixed integer programming (MIP)

Li, Yu, Topal, Erkan and Williams, David (2013). Waste rock dumping optimisation using mixed integer programming (MIP). International Journal of Mining, Reclamation and Environment, 27 (6), 425-436. doi: 10.1080/17480930.2013.794513

Waste rock dumping optimisation using mixed integer programming (MIP)

2013

Conference Publication

Shear strength parameters for assessing geotechnical slope stability of open pit coal mine spoil based on laboratory tests

Kho, A. K., Williams, D. J., Kaneko, N. and Smith, N. J. W. (2013). Shear strength parameters for assessing geotechnical slope stability of open pit coal mine spoil based on laboratory tests. Slope Stability 2013, Brisbane, QLD, Australia, 25-27 September, 2013. Nedlands, WA, Australia: Australian Centre for Geomechanics.

Shear strength parameters for assessing geotechnical slope stability of open pit coal mine spoil based on laboratory tests

2013

Conference Publication

Tensile fracturing of anisotropic Brisbane phyllite

Erarslan, N., Williams, D. J. and Shokouhi, A. (2013). Tensile fracturing of anisotropic Brisbane phyllite. Eurock 2013: ISRM International Symposium, Wrocław, Poland, 23-26 September, 2013. Leiden, Netherland: CRC Press/Balkema. doi: 10.1201/b15683-44

Tensile fracturing of anisotropic Brisbane phyllite