|
2004 Journal Article Microstructure and mechanical properties of high pressure die cast magnesium alloy AE42 with 1% strontiumDargusch, MS, Pettersen, K, Bakke, P, Nogita, K, Bowles, AL and Dunlop, GL (2004). Microstructure and mechanical properties of high pressure die cast magnesium alloy AE42 with 1% strontium. International Journal of Cast Metals Research, 17 (3), 170-173. doi: 10.1179/136404604225017555 |
|
2003 Conference Publication Development of a non intrusive heat transfer coefficient gauge and its application to high pressure die castingDour, G., Dargusch, M. S., Davidson, C. J., Nef, A. and St John, D. H. (2003). Development of a non intrusive heat transfer coefficient gauge and its application to high pressure die casting. Light Metals Technology Conference 2003, Brisbane, Australia, 18-20 September 2003. Brisbane: CRC for Cast Metals Manufacturing (CAST). |
|
2003 Conference Publication Squeeze pin implementation in a high pressue die castingBinney, M. N., Dargusch, M. S., Nave, M.D. and McKinney, P. (2003). Squeeze pin implementation in a high pressue die casting. Light Metals Technology Conference 2003, Brisbane, Australia, 18-20 September 2003. Brisbane: CRC for Cast Metals Manufacturing (CAST). |
|
2003 Conference Publication Manufacture of telecommunications components using high pressure die casting - a case studyDargusch, M. S., Wang, G., Schauer, N. and Christodoulou, P. (2003). Manufacture of telecommunications components using high pressure die casting - a case study. Light Metals Technology Conference 2003, Brisbane, Australia, 18-20 September 2003. Brisbane: CRC for Cast Metals Manufacturing (CAST). |
|
2003 Conference Publication Porosity reduction in a high pressure die casting through the use of squeeze pinsBinney, M. N., Dargusch, M. S., Nave, M. and McKinney, P. (2003). Porosity reduction in a high pressure die casting through the use of squeeze pins. Die Casting in the Heartland, Indianapolis, USA, 15-18 September 2003. USA: North American Die Casting Association. |
|
2000 Book Chapter Creep and bolt-load retention of sand cast elektron MEZBettles, C. J. and Dargusch, M. S. (2000). Creep and bolt-load retention of sand cast elektron MEZ. Magnesium Alloys and their Applications. (pp. 705-710) edited by K. U. Kainer. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA. doi: 10.1002/3527607552.ch111 |
|
1999 Journal Article Influence of microstructure on the corrosion of diecast AZ91DSong, Guangling, Atrens, Andrej and Dargusch, Matthew (1999). Influence of microstructure on the corrosion of diecast AZ91D. Corrosion Science, 41 (2), 249-273. doi: 10.1016/S0010-938X(98)00121-8 |
|
1998 Other Outputs The role of microstructure in the creep of die cast magnesium alloysDargusch, Matthew (1998). The role of microstructure in the creep of die cast magnesium alloys. PhD Thesis, School of Engineering, The University of Queensland. doi: 10.14264/aa6a931 |
|
1997 Conference Publication Elevated temperature deformation of die cast Mg alloy AZ91DDargusch, M., Hisa, M., Caceres, C. H. and Dunlop, G. L. (1997). Elevated temperature deformation of die cast Mg alloy AZ91D. 3rd International Magnesium Conference, Manchester, United Kingdom, 10-12 April 1996. London, United Kingdom: Institute of Materials. |
