|
2015 Other Outputs A process for integrating thermoset and thermoplastic polymersVandi, Luigi-Jules, Heitzmann, Michael and Paton, Rowan (2015). A process for integrating thermoset and thermoplastic polymers. |
|
2015 Conference Publication Generation of a short fibre biocomposite representative volume elementThomas, Kelli L., Bryce, Holly C. A. and Heitzmann, Michael T. (2015). Generation of a short fibre biocomposite representative volume element. International Conference on Performance-based and Life-cycle Structural Engineering, Brisbane, QLD, Australia, 9-11 December 2015. Brisbane, QLD, Australia: School of Civil Engineering, The University of Queensland. doi: 10.14264/uql.2016.500 |
|
2015 Conference Publication A practical toolbox to overcome the multiple challenges of biocomposites extrusionLegras, Angelica, Truss, Rowan W., Chaleat, Celine M. and Heitzmann, Michael T. (2015). A practical toolbox to overcome the multiple challenges of biocomposites extrusion. 2015 Australasian Composites Conference (ASC 2015), Gold Coast, QLD, Australia, 21-23 April 2015. |
|
2015 Conference Publication Hemp hurd flour as an alternative low cost filler in wood plastic compositesHeitzmann, Michael T., Ali, Afifah Md, Legras, Angelica, Vandi, Luigi J. and Milne, John (2015). Hemp hurd flour as an alternative low cost filler in wood plastic composites. International Conference on Performance-based and Life-cycle Structural Engineering, Brisbane, QLD, Australia, 9-11 December 2015. Brisbane, QLD, Australia: School of Civil Engineering, The University of Queensland. doi: 10.14264/uql.2016.419 |
|
2015 Conference Publication Composites Training through Development of a Formula SAE Race CarFarmer, N., Lederhose,, Olszewski, G., Jahn, I. and Heitzmann, M. (2015). Composites Training through Development of a Formula SAE Race Car. Australasian Composites Conference, Sanctuary Cove, QLD Australia, 21-23 April, 2015. |
|
2015 Conference Publication Comparison of experimental and calculated tensile properties of flax fibresSoatthiyanon, Niphaphun, Crosky, Alan and Heitzmann, Michael T. (2015). Comparison of experimental and calculated tensile properties of flax fibres. International Conference on Performance-based and Life-cycle Structural Engineering, Brisbane, QLD, Australia, 9-11 December 2015. Brisbane, QLD, Australia: School of Civil Engineering, The University of Queensland. doi: 10.14264/uql.2016.423 |
|
2015 Conference Publication GFRP-to-timber bonded joints: Adhesive selectionMiao, Chuang, Fernando, Dilum, Bailleres, Henri and Heitzmann, Michael (2015). GFRP-to-timber bonded joints: Adhesive selection. International Institute for FRP in Construction (IIFC). |
|
2015 Conference Publication Probabilistic design: a new approach to look at composite designHeitzmann, Michael Tobias, Torres, Juan Pablo, Vandi, Luigi-Jules and Schaber, Sarah (2015). Probabilistic design: a new approach to look at composite design. Composites Australia and CRC-ACS Composites Conference and Trade Show 2015, Gold Coast, Australia, 21-23 April 2015. |
|
2015 Conference Publication Hybrid thin-walled members made of FRP and timberFernando, Dilum, Gattas, Joseph, Teng, J. G. and Heitzmann, Michael (2015). Hybrid thin-walled members made of FRP and timber. International Institute for FRP in Construction (IIFC). |
|
2015 Conference Publication Low-tech recycling strategy for the production of building materials for developing nationsWhite, Claire A., Wood, Jessica C., Milne, John and Heitzmann, Michael T. (2015). Low-tech recycling strategy for the production of building materials for developing nations. International Conference on Performance-based and Life-cycle Structural Engineering, Brisbane Australia, 9-11 December 2015. Brisbane, QLD, Australia: School of Civil Engineering, The University of Queensland. doi: 10.14264/uql.2016.418 |
|
2014 Conference Publication Modelling squeeze flow of viscous polymer meltsShelley, Tristan J., Liu, Xiaolin, Veidt, Martin, Heitzmann, Michael and Paton, Rowan (2014). Modelling squeeze flow of viscous polymer melts. ECFD VI: 6th European Conference on Computational Fluid Dynamics 2014, Barcelona, Spain, 20-25 July, 2014. Barcelona, Spain: International Center for Numerical Methods in Engineering (CIMNE). |
|
2014 Conference Publication Optimisation of the twin-screw compounding process for short fibre biocompositesLegras, A., Truss, R., Rao, S., Bhattacharyya, D., Soatthiyanon, N., Crosky, A. and Heitzmann, M. (2014). Optimisation of the twin-screw compounding process for short fibre biocomposites. Composites Australia and CRC-ACS Conference, Newcastle, NSW, Australia, 7-9 April 2014. Hawthorn, VIC, Australia: Composites Australia. |
|
2013 Journal Article Fluorine mobility during SEM-EDX analysis: A challenge for characterizing epoxy/fluoropolymer interfacesVandi, Luigi-Jules, Truss, Rowan, Veidt, Martin, Rasch, Ronald, Heitzmann, Michael T. and Paton, Rowan (2013). Fluorine mobility during SEM-EDX analysis: A challenge for characterizing epoxy/fluoropolymer interfaces. Journal of Physical Chemistry C, 117 (33), 16933-16941. doi: 10.1021/jp403314t |
|
2013 Journal Article Single-plant biocomposite from Ricinus Communis: preparation, properties and environmental performanceHeitzmann, M., Veidt, M., Ng, C. T., Lindenberger. B., Hou, M., Truss, R. and Liew, C. K. (2013). Single-plant biocomposite from Ricinus Communis: preparation, properties and environmental performance. Journal of Polymers and the Environment, 21 (2), 366-374. doi: 10.1007/s10924-012-0517-3 |
|
2012 Other Outputs In-mould priming of fibre reinforced plastic helicopter components using thermoplastic polymers: Process integration, material selection and interface characterisationHeitzmann, Michael (2012). In-mould priming of fibre reinforced plastic helicopter components using thermoplastic polymers: Process integration, material selection and interface characterisation. PhD Thesis, School of Mechanical and Mining Engineering, The University of Queensland. |
|
2012 Journal Article Morphology of an interface between polyetherimide and epoxy prepregHeitzmann, Michael T., Hou, Meng, Veidt, Martin, Vandi, Luigi-Jules and Paton, Rowan (2012). Morphology of an interface between polyetherimide and epoxy prepreg. Advanced Materials Research, 393-395, 184-188. doi: 10.4028/www.scientific.net/AMR.393-395.184 |
|
2012 Conference Publication Interface diffusion and morphology of aerospace grade epoxy co-cured with thermoplastic polymersVandi, Luigi-Jules, Hou, Meng, Veidt, Martin, Truss, Rowan W., Heitzmann, M. and Paton, R. (2012). Interface diffusion and morphology of aerospace grade epoxy co-cured with thermoplastic polymers. 28th International Congress of the Aeronautical Sciences (ICAS 2012), Brisbane, Australia, 23-28 September 2012. [London], U.K.: International Council of the Aeronautical Sciences (ICAS). |
|
2012 Conference Publication Bond surface analysis using Fourier Transform Infrared Spectroscopy (FTIR) and X-Ray Photoelectron Spectroscopy (XPS)Virk, Amandeep, Vandi, Luigi-Jules, Meeuwissen, Marieke and Heitzmann, Michael (2012). Bond surface analysis using Fourier Transform Infrared Spectroscopy (FTIR) and X-Ray Photoelectron Spectroscopy (XPS). Diversity in Composites 2012 Conference, Blue Mountains, NSW, Australia, 15-16 March 2012. Hawthorn, VIC, Australia: Composites Australia. |
|
2011 Journal Article Influence of nonlinearities on the accuracy of the analytical solution for the shaft loaded blister testHeitzmann, M.T., Hou, M., Veidt, M. and Falzon, P. (2011). Influence of nonlinearities on the accuracy of the analytical solution for the shaft loaded blister test. International Journal of Solids and Structures, 48 (10), 1424-1435. doi: 10.1016/j.ijsolstr.2011.01.024 |
|
2011 Journal Article Microanalysis techniques for the investigation of interphases formed between thermoset and thermoplastic polymers: Scanning electron microscopy and energy dispersive x-ray analysisHeitzmann, Michael T., Hou, Meng, Veidt, Martin, Paton, Rowan and Rasch, Ron (2011). Microanalysis techniques for the investigation of interphases formed between thermoset and thermoplastic polymers: Scanning electron microscopy and energy dispersive x-ray analysis. Key Engineering Materials, 471-472, 309-314. doi: 10.4028/www.scientific.net/KEM.471-472.309 |
