|
2022 Journal Article Enhancing specific energy absorption of additively manufactured titanium lattice structures through simultaneous manipulation of architecture and constituent materialZhang, Jingqi, Liu, Yingang, Babamiri, Behzad Bahrami, Zhou, Ying, Dargusch, Matthew, Hazeli, Kavan and Zhang, Ming-Xing (2022). Enhancing specific energy absorption of additively manufactured titanium lattice structures through simultaneous manipulation of architecture and constituent material. Additive Manufacturing, 55 102887, 1-16. doi: 10.1016/j.addma.2022.102887 |
|
2022 Journal Article TiB reinforced lattice structures produced by laser powder bed fusion with high elastic admissible strainOtte, Joseph A., Soro, Nicolas, Yang, Nan, Zou, Jin and Dargusch, Matthew S. (2022). TiB reinforced lattice structures produced by laser powder bed fusion with high elastic admissible strain. Materials Science and Engineering A, 845 143249, 1-15. doi: 10.1016/j.msea.2022.143249 |
|
2022 Journal Article In vivo performance of a rare earth free Mg–Zn–Ca alloy manufactured using twin roll casting for potential applications in the cranial and maxillofacial fixation devicesDargusch, Matthew S., Balasubramani, Nagasivamuni, Yang, Nan, Johnston, Sean, Ali, Yahia, Wang, Gui, Venezuela, Jeffrey, Carluccio, Jiwon, Lau, Cora, Allavena, Rachel, Liang, Daniel, Mardon, Karine and Ye, Qingsong (2022). In vivo performance of a rare earth free Mg–Zn–Ca alloy manufactured using twin roll casting for potential applications in the cranial and maxillofacial fixation devices. Bioactive Materials, 12, 85-96. doi: 10.1016/j.bioactmat.2021.10.026 |
|
2022 Journal Article Additive manufacturing of biomimetic titanium-tantalum lattices for biomedical implant applicationsSoro, Nicolas, Brodie, Erin G., Abdal-hay, Abdalla, Alali, Aya Q., Kent, Damon and Dargusch, Matthew S. (2022). Additive manufacturing of biomimetic titanium-tantalum lattices for biomedical implant applications. Materials and Design, 218 110688, 1-14. doi: 10.1016/j.matdes.2022.110688 |
|
2022 Journal Article Surface modification of pure zinc by acid etching: accelerating the corrosion rate and enhancing biocompatibility and antibacterial characteristicsXiang, Enmao, Gómez-Cerezo, Maria Natividad, Ali, Yahia, Ramachandra, Srinivas Sulugodu, Yang, Nan, Dargusch, Matthew, Moran, Corey S., Ivanovski, Saso and Abdal-hay, Abdalla (2022). Surface modification of pure zinc by acid etching: accelerating the corrosion rate and enhancing biocompatibility and antibacterial characteristics. ACS Applied Materials and Interfaces, 14 (19), 22554-22569. doi: 10.1021/acsami.2c00918 |
|
2022 Journal Article The influence of the protein bovine serum albumin (BSA) on the corrosion of Mg, Zn, and Fe in Zahrina's simulated interstitial fluidMardina, Zahrina, Venezuela, Jeffrey, Dargusch, Matthew S., Shi, Zhiming and Atrens, Andrej (2022). The influence of the protein bovine serum albumin (BSA) on the corrosion of Mg, Zn, and Fe in Zahrina's simulated interstitial fluid. Corrosion Science, 199 110160, 1-19. doi: 10.1016/j.corsci.2022.110160 |
|
2022 Journal Article Understanding the grain refinement mechanisms in aluminium 2319 alloy produced by wire arc additive manufacturingMclean, N., Bermingham, M. J., Colegrove, P., Sales, A. and Dargusch, M. S. (2022). Understanding the grain refinement mechanisms in aluminium 2319 alloy produced by wire arc additive manufacturing. Science and Technology of Welding and Joining, 27 (6), 479-489. doi: 10.1080/13621718.2022.2064704 |
|
2022 Journal Article Design, mechanical and degradation requirements of biodegradable metal mesh for pelvic floor reconstructionMardina, Zahrina, Venezuela, Jeffrey, Maher, Christopher, Shi, Zhiming, Dargusch, Matthew S. and Atrens, Andrej (2022). Design, mechanical and degradation requirements of biodegradable metal mesh for pelvic floor reconstruction. Biomaterials Science, 10 (13), 3371-3392. doi: 10.1039/d2bm00179a |
|
2022 Journal Article Mechanical properties and deformation mechanisms of martensitic Ti6Al4V alloy processed by laser powder bed fusion and water quenchingSun, Shoujin, Zhang, Duyao, Palanisamy, Suresh, Liu, Qianchu and Dargusch, Matthew S. (2022). Mechanical properties and deformation mechanisms of martensitic Ti6Al4V alloy processed by laser powder bed fusion and water quenching. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 839 142817, 1. doi: 10.1016/j.msea.2022.142817 |
|
2022 Journal Article Microstructure evolution, mechanical properties and corrosion behavior of biodegradable Zn-2Cu-0.8Li alloy during room temperature drawingGao, Zhiqiang, Zhang, Xiyuan, Huang, Hua, Chen, Chun, Jiang, Jimiao, Niu, Jialin, Dargusch, Matthew and Yuan, Guangyin (2022). Microstructure evolution, mechanical properties and corrosion behavior of biodegradable Zn-2Cu-0.8Li alloy during room temperature drawing. Materials Characterization, 185 111722, 111722. doi: 10.1016/j.matchar.2022.111722 |
|
2022 Journal Article Metastable Ti-Fe-Ge alloys with high elastic admissible strainSjafrizal, Teddy, Kent, Damon, Dehghan-Manshadi, Ali, Xiao, Wenlong and Dargusch, Matthew S. (2022). Metastable Ti-Fe-Ge alloys with high elastic admissible strain. Materialia, 21 101304, 101304. doi: 10.1016/j.mtla.2021.101304 |
|
2022 Journal Article Surface modification of biomedical Ti and Ti alloys: a review on current advancesXu, Jingyuan, Zhang, Jiawen, Shi, Yangfan, Tang, Jincheng, Huang, Danni, Yan, Ming and Dargusch, Matthew S. (2022). Surface modification of biomedical Ti and Ti alloys: a review on current advances. Materials, 15 (5) 1749, 1749. doi: 10.3390/ma15051749 |
|
2022 Journal Article Towards β-fleck defect free additively manufactured titanium alloys by promoting the columnar to equiaxed transition and grain refinementNg, C. H., Bermingham, M. J., Yuan, L. and Dargusch, M. S. (2022). Towards β-fleck defect free additively manufactured titanium alloys by promoting the columnar to equiaxed transition and grain refinement. Acta Materialia, 224 117511, 117511. doi: 10.1016/j.actamat.2021.117511 |
|
2022 Journal Article Effect of Mg on dynamic recrystallization of Zn–Mg alloys during room-temperature compressionLiu, Shiyang, Zhan, Hongyi, Kent, Damon, Tan, Qiyang, Yin, Yu, Doan, Nghiem, Wang, Chang, Dargusch, Matthew and Wang, Gui (2022). Effect of Mg on dynamic recrystallization of Zn–Mg alloys during room-temperature compression. Materials Science and Engineering: A, 830 142243, 142243. doi: 10.1016/j.msea.2021.142243 |
|
2021 Journal Article Ultrasonic treatment for the refinement of brittle CaZn13 phases in a biomedical Zn-Cu-Ca alloyBalasubramani, Nagasivamuni, Yang, Nan, Venezuela, Jeffrey and Dargusch, Matthew (2021). Ultrasonic treatment for the refinement of brittle CaZn13 phases in a biomedical Zn-Cu-Ca alloy. Materials Letters, 305 130754, 130754. doi: 10.1016/j.matlet.2021.130754 |
|
2021 Journal Article Biodegradable shape memory alloys: progress and prospectsWang, Yuan, Venezuela, Jeffrey and Dargusch, Matthew (2021). Biodegradable shape memory alloys: progress and prospects. Biomaterials, 279 121215, 1-28. doi: 10.1016/j.biomaterials.2021.121215 |
|
2021 Journal Article Two-dimensional flexible thermoelectric devices: Using modeling to deliver optimal capabilityXu, Shengduo, Hong, Min, Li, Meng, Sun, Qiang, Yin, Yu, Liu, Weidi, Shi, Xiaolei, Dargusch, Matthew, Zou, Jin and Chen, Zhi-Gang (2021). Two-dimensional flexible thermoelectric devices: Using modeling to deliver optimal capability. Applied Physics Reviews, 8 (4) 041404, 1-8. doi: 10.1063/5.0067930 |
|
2021 Journal Article Zinc-nutrient element based alloys for absorbable wound closure devices fabrication: current status, challenges, and future prospectsYang, Nan, Venezuela, Jeffrey, Almathami, Sharifah and Dargusch, Matthew (2021). Zinc-nutrient element based alloys for absorbable wound closure devices fabrication: current status, challenges, and future prospects. Biomaterials, 280 121301, 121301. doi: 10.1016/j.biomaterials.2021.121301 |
|
2021 Journal Article Electrochemical stability and biofouling behavior of differently polarized Ti surfaces in simulated and natural seawaterDai, Zhaoxia, Wang, Zi Ming, Zheng, Dajiang, Song, Guang-Ling, Feng, Danqing, Dargusch, Matthew, Chang, Hui and Zhou, Lian (2021). Electrochemical stability and biofouling behavior of differently polarized Ti surfaces in simulated and natural seawater. Journal of Materials Engineering and Performance, 31 (4), 2823-2836. doi: 10.1007/s11665-021-06425-5 |
|
2021 Other Outputs Enhancing the corrodibility of biodegradable iron and zinc using poly(lactic) acid (PLA) coatingWang, Anguo, Dargusch, Matthew and Venezuela, Jeffrey (2021). Enhancing the corrodibility of biodegradable iron and zinc using poly(lactic) acid (PLA) coating. The University of Queensland. (Dataset) doi: 10.48610/5716f87 |
