|
2017 Journal Article Improvement of interfacial bonding between plasma-sprayed cast iron splat and aluminum substrate through preheating substrateXing, Ya-Zhe, Liu, Zhang, Wang, Gui, Li, Xing-Hang, Jiang, Chao-Ping, Chen, Yong-Nan, Zhang, Yong, Song, Xu-Ding and Dargusch, Matthew (2017). Improvement of interfacial bonding between plasma-sprayed cast iron splat and aluminum substrate through preheating substrate. Surface and Coatings Technology, 316, 190-198. doi: 10.1016/j.surfcoat.2017.03.032 |
|
2017 Journal Article Effects of spray parameters on the adhesion between plasma-sprayed cast iron splat and aluminium substrateXing, Ya-Zhe, Liu, Zhang, Wang, Gui, Li, Xing-Hang, Xing, Ya-Long, Jiang, Chao-Ping, Chen, Yong-Nan, Song, Xu-Ding and Dargusch, Matthew (2017). Effects of spray parameters on the adhesion between plasma-sprayed cast iron splat and aluminium substrate. Surface and Coatings Technology, 315, 1-8. doi: 10.1016/j.surfcoat.2017.02.019 |
|
2017 Journal Article Gasification of diosgenin solid waste for hydrogen production in supercritical waterCao, Wen, Cao, Changqing, Guo, Liejin, Jin, Hui, Dargusch, Matthew, Bernhardt, Debra and Yao, Xiangdong (2017). Gasification of diosgenin solid waste for hydrogen production in supercritical water. International Journal of Hydrogen Energy, 42 (15), 9448-9457. doi: 10.1016/j.ijhydene.2017.03.115 |
|
2017 Journal Article Improvements in microstructure and wear resistance of plasma-sprayed Fe-based amorphous coating by laser-remeltingJiang, Chaoping, Chen, Hong, Wang, Gui, Chen, Yongnan, Xing, Yazhe, Zhang, Chunhua and Dargusch, Matthew (2017). Improvements in microstructure and wear resistance of plasma-sprayed Fe-based amorphous coating by laser-remelting. Journal of Thermal Spray Technology, 26 (4), 778-786. doi: 10.1007/s11666-017-0546-5 |
|
2017 Journal Article Development in plasma surface diffusion techniques of Ti-6Al-4V alloy: a reviewXing, Ya-Zhe, Wang, Gui, Zhang, Yong, Chen, Yong-Nan and Dargusch, Matthew (2017). Development in plasma surface diffusion techniques of Ti-6Al-4V alloy: a review. International Journal of Advanced Manufacturing Technology, 92 (5-8), 1-12. doi: 10.1007/s00170-017-0302-5 |
|
2017 Journal Article Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser meltingAttar, H., Ehtemam-Haghighi, S., Kent, D., Okulov, I. V., Wendrock, H., Bӧnisch, M., Volegov, A. S., Calin, M., Eckert, J. and Dargusch, M. S. (2017). Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser melting. Materials Science and Engineering: A, 688, 20-26. doi: 10.1016/j.msea.2017.01.096 |
|
2017 Journal Article Grain refinement of wire arc additively manufactured titanium by the addition of siliconMereddy, S., Bermingham, M. J., StJohn, D. H. and Dargusch, M. S. (2017). Grain refinement of wire arc additively manufactured titanium by the addition of silicon. Journal of Alloys and Compounds, 695, 2097-2103. doi: 10.1016/j.jallcom.2016.11.049 |
|
2017 Journal Article Switched photocurrent on tin sulfide-based nanoplate photoelectrodesChen, Hongjun, Lyu, Miaoqiang, Zhang, Meng, Feron, Krishna, Searles, Debra J., Dargusch, Matthew, Yao, Xiangdong and Wang, Lianzhou (2017). Switched photocurrent on tin sulfide-based nanoplate photoelectrodes. ChemSusChem, 10 (4), 670-674. doi: 10.1002/cssc.201601603 |
|
2017 Conference Publication Influence of flash treatment on pseudoelastic behaviour of biomedical Ti-25Nb-3Zr-3Mo-2Sn alloyZhu, Suming, Zhu, Yuman, Dargusch, Matthew and Nie, Jian-Feng (2017). Influence of flash treatment on pseudoelastic behaviour of biomedical Ti-25Nb-3Zr-3Mo-2Sn alloy. 9th International Conference on Processing and Manufacturing of Advanced Materials, THERMEC 2016, Graz Austria, 29 May - 3 June 2016. Pfaffikon, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.879.1375 |
|
2017 Book Chapter Understanding the corrosion of Mg and Mg alloysAtrens, A., Song, G.-L., Shi, Z., Soltan, A., Johnston, S. and Dargusch, M. S. (2017). Understanding the corrosion of Mg and Mg alloys. Reference module in chemistry, molecular sciences and chemical engineering. (pp. 1-20) edited by Jan Reedijk, Hideaki Kakeya, Koop Lammertsma, Roberto Marquardt, Massimo Morbidelli, Hiromi Nakai, Giovanni Natile, Colin Poole, Martin Quack, Kari Rissanen and Klaus Wandelt. Amsterdam, Netherlands: Elsevier. doi: 10.1016/B978-0-12-409547-2.13426-2 |
|
2017 Journal Article N-type Bi-doped PbTe nanocubes with enhanced thermoelectric performanceYang, Lei, Chen, Zhi-Gang, Hong, Min, Wang, Lihua, Kong, Deli, Huang, Liqing, Han, Guang, Zou, Yichao, Dargusch, Matthew and Zou, Jin (2017). N-type Bi-doped PbTe nanocubes with enhanced thermoelectric performance. Nano Energy, 31, 105-112. doi: 10.1016/j.nanoen.2016.11.027 |
|
2016 Journal Article Hydrogen production from supercritical water gasification of chicken manureCao, Wen, Cao, Changqing, Guo, Liejin, Jin, Hui, Dargusch, Matthew, Bernhardt, Debra and Yao, Xiangdong (2016). Hydrogen production from supercritical water gasification of chicken manure. International Journal of Hydrogen Energy, 41 (48), 22722-22731. doi: 10.1016/j.ijhydene.2016.09.031 |
|
2016 Journal Article Effects of chip conditions on the solid state recycling of Ti-6Al-4V machining chipsLui, E. W., Palanisamy, S., Dargusch, M. S. and Xia, K. (2016). Effects of chip conditions on the solid state recycling of Ti-6Al-4V machining chips. Journal of Materials Processing Technology, 238, 297-304. doi: 10.1016/j.jmatprotec.2016.07.028 |
|
2016 Journal Article The effect of droplet size on the localized corrosion of high-strength aluminum alloysKnight, S. P., Sudholz, A. D., Butler, A., Palanisamy, S., Dargusch, M. S. and Trueman, A. R. (2016). The effect of droplet size on the localized corrosion of high-strength aluminum alloys. Materials and Corrosion, 67 (12), 1294-1307. doi: 10.1002/maco.201609045 |
|
2016 Journal Article Constitutive equation for the hot deformation behavior of Csf/AZ91D composites and its validity for numerical simulationWang, Zhenjun, Qi, Lehua, Wang, Gui, Li, Hejun and Dargusch, Matthew S. (2016). Constitutive equation for the hot deformation behavior of Csf/AZ91D composites and its validity for numerical simulation. Mechanics of Materials, 102, 90-96. doi: 10.1016/j.mechmat.2016.08.011 |
|
2016 Journal Article Functionally graded porous scaffolds made of Ti-based agglomeratesNazari, Keivan A., Hilditch, Tim, Dargusch, Matthew S. and Nouri, Alireza (2016). Functionally graded porous scaffolds made of Ti-based agglomerates. Journal of the Mechanical Behavior of Biomedical Materials, 63, 157-163. doi: 10.1016/j.jmbbm.2016.06.016 |
|
2016 Journal Article Atomic size and local order effects on the high temperature strength of binary Mg alloysAbaspour, Saeideh, Zambelli, Victor, Dargusch, Matthew and Caceres, Carlos H. (2016). Atomic size and local order effects on the high temperature strength of binary Mg alloys. Materials Science and Engineering: A, 673, 114-121. doi: 10.1016/j.msea.2016.07.019 |
|
2016 Journal Article Influence of surface condition on the corrosion of ultra-high-purity Mg alloy wireJohnston, Sean, Shi, Zhiming, Dargusch, Matthew S. and Atrens, Andrej (2016). Influence of surface condition on the corrosion of ultra-high-purity Mg alloy wire. Corrosion Science, 108, 66-75. doi: 10.1016/j.corsci.2016.03.007 |
|
2016 Journal Article The role of ω in the precipitation of α in near-β Ti alloysLi, Tong, Kent, Damon, Sha, Gang, Cairney, Julie M. and Dargusch, Matthew S. (2016). The role of ω in the precipitation of α in near-β Ti alloys. Scripta Materialia, 117, 92-95. doi: 10.1016/j.scriptamat.2016.02.026 |
|
2016 Journal Article Application of augmented finite element and cohesive zone modelling to predict damage evolution in metal matrix composites and aircraft coatingsHan, Bing, Veidt, Martin, Reiner, Johannes and Dargusch, Matthew S. (2016). Application of augmented finite element and cohesive zone modelling to predict damage evolution in metal matrix composites and aircraft coatings. Journal of Mechanical Engineering Research, 8 (1), 1-17. doi: 10.5897/JMER2015.0377 |
