|
2017 Journal Article Preparation of 2.5D woven fabric C-f/Al composite and its tensile deformation behavior in warp/weft directionZhenjun, Wang, Jingtao, Dong, Wang, Gui, Huan, Yu, Zhifeng, Xu and Dargusch, Matthew S. (2017). Preparation of 2.5D woven fabric C-f/Al composite and its tensile deformation behavior in warp/weft direction. Rare Metal Materials and Engineering, 46 (12), 3744-3752. |
|
2017 Journal Article A case-study on the mechanism of flank wear during laser-assisted machining of a titanium alloyRahman Rashid, R. A., Palanisamy, Suresh, Sun, Shoujin and Dargusch, M. S. (2017). A case-study on the mechanism of flank wear during laser-assisted machining of a titanium alloy. International Journal of Machining and Machinability of Materials, 19 (6), 538-553. doi: 10.1504/IJMMM.2017.088895 |
|
2017 Journal Article Oxide Dissolution and Oxygen Diffusion in Solid-State Recycled Ti-6Al-4V: Numerical Modeling, Verification by Nanoindentation, and Effects on Grain Growth and RecrystallizationLui, E. W., Palanisamy, S., Dargusch, M. S. and Xia, K. (2017). Oxide Dissolution and Oxygen Diffusion in Solid-State Recycled Ti-6Al-4V: Numerical Modeling, Verification by Nanoindentation, and Effects on Grain Growth and Recrystallization. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 48A (12), 5978-5989. doi: 10.1007/s11661-017-4358-5 |
|
2017 Journal Article The influence of two common sterilization techniques on the corrosion of Mg and its alloys for biomedical applicationsJohnston, Sean, Shi, Zhiming, Hoe, Cherilyn, Uggowitzer, Peter J., Cihova, Martina, Loffler, Jorg F., Dargusch, Matthew S. and Atrens, Andrejs (2017). The influence of two common sterilization techniques on the corrosion of Mg and its alloys for biomedical applications. Journal of Biomedical Materials Research - Part B Applied Biomaterials, 106 (5), 1907-1917. doi: 10.1002/jbm.b.34004 |
|
2017 Journal Article Effect of tool wear on chip formation during dry machining of Ti-6Al-4V alloy, part 1: Effect of gradual tool wear evolutionSun, Shoujin, Brandt, Milan and Dargusch, Matthew S. (2017). Effect of tool wear on chip formation during dry machining of Ti-6Al-4V alloy, part 1: Effect of gradual tool wear evolution. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 231 (9), 1559-1574. doi: 10.1177/0954405415599956 |
|
2017 Journal Article Effect of Artificial Seawater on Passivation of TiYan, Shaokun, Song, Guang-Ling, Zheng, Dajiang, Dargusch, Matthew and Zhou, Lian (2017). Effect of Artificial Seawater on Passivation of Ti. ECS Meeting Abstracts, MA2017-02 (10), 738-738. doi: 10.1149/ma2017-02/10/738 |
|
2017 Journal Article Comparative study of commercially pure titanium produced by laser engineered net shaping, selective laser melting and casting processesAttar, Hooyar, Dargusch, Matthew S., Ehtemam-Haghighi, Shima, Kent, Damon and Wu, Xinhua (2017). Comparative study of commercially pure titanium produced by laser engineered net shaping, selective laser melting and casting processes. Materials Science and Engineering: A, 705, 385-393. doi: 10.1016/j.msea.2017.08.103 |
|
2017 Journal Article Metal injection moulding of titanium and titanium alloys: challenges and recent developmentDehghan-Manshadi, A., Bermingham, M. J., Dargusch, M. S., StJohn, D. H. and Qian, M. (2017). Metal injection moulding of titanium and titanium alloys: challenges and recent development. Powder Technology, 319, 289-301. doi: 10.1016/j.powtec.2017.06.053 |
|
2017 Journal Article Role of ultrasonic treatment, inoculation and solute in the grain refinement of commercial purity aluminiumWang, G., Wang, Q., Easton, M. A., Dargusch, M. S., Qian, M., Eskin, D. G. and StJohn, D. H. (2017). Role of ultrasonic treatment, inoculation and solute in the grain refinement of commercial purity aluminium. Scientific Reports, 7 (1) 9729, 9729. doi: 10.1038/s41598-017-10354-6 |
|
2017 Journal Article Metallurgical and geometrical characterisation of the 316L stainless steel clad deposited on a mild steel substrateRashid, R. A. Rahman, Abaspour, S., Palanisamy, S., Matthews, N. and Dargusch, M. S. (2017). Metallurgical and geometrical characterisation of the 316L stainless steel clad deposited on a mild steel substrate. Surface & Coatings Technology, 327, 174-184. doi: 10.1016/j.surfcoat.2017.08.013 |
|
2017 Journal Article A progressive analysis of matrix cracking-induced delamination in composite laminates using an advanced phantom node methodReiner, Johannes, Veidt, Martin, Dargusch, Matthew and Gross, Lutz (2017). A progressive analysis of matrix cracking-induced delamination in composite laminates using an advanced phantom node method. Journal of Composite Materials, 51 (20), 2933-2947. doi: 10.1177/0021998316684203 |
|
2017 Journal Article Identifying the stages during ultrasonic processing that reduce the grain size of aluminum with added Al3Ti1B master alloyWang, Gui, Dargusch, Matthew S., Eskin, Dmitry G. and StJohn, David H. (2017). Identifying the stages during ultrasonic processing that reduce the grain size of aluminum with added Al3Ti1B master alloy. Advanced Engineering Materials, 19 (8) 1700264, 1700264. doi: 10.1002/adem.201700264 |
|
2017 Journal Article Mechanical properties and biocompatibility of porous titanium scaffolds for bone tissue engineeringChen, Yunhui, Frith, Jessica Ellen, Dehghan-Manshadi, Ali, Attar, Hooyar, Kent, Damon, Soro, Nicolas Dominique Mathieu, Bermingham, Michael J. and Dargusch, Matthew S. (2017). Mechanical properties and biocompatibility of porous titanium scaffolds for bone tissue engineering. Journal of the Mechanical Behavior of Biomedical Materials, 75, 169-174. doi: 10.1016/j.jmbbm.2017.07.015 |
|
2017 Journal Article Deformation behaviour and mechanisms during hot compression at supertransus temperatures in Ti-10V-2Fe-3AlZhao, Juan, Zhong, Jie, Yan, Fei, Chai, Fang and Dargusch, Matthew (2017). Deformation behaviour and mechanisms during hot compression at supertransus temperatures in Ti-10V-2Fe-3Al. Journal of Alloys and Compounds, 710, 616-627. doi: 10.1016/j.jallcom.2017.03.219 |
|
2017 Journal Article Manufacturing of graded titanium scaffolds using a novel space holder techniqueChen, Yunhui , Kent, Damon , Bermingham, Michael , Dehghan-Manshadi, Ali , Wang, Gui , Wen, Cuie and Dargusch, Matthew (2017). Manufacturing of graded titanium scaffolds using a novel space holder technique. Bioactive Materials, 2 (4), 248-252. doi: 10.1016/j.bioactmat.2017.07.001 |
|
2017 Journal Article Effect of tool wear on chip formation during dry machining of Ti-6Al-4V alloy, part 2: effect of tool failure modesSun, Shoujin, Brandt, Milan and Dargusch, Matthew S. (2017). Effect of tool wear on chip formation during dry machining of Ti-6Al-4V alloy, part 2: effect of tool failure modes. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 231 (9), 1575-1586. doi: 10.1177/0954405415600011 |
|
2017 Journal Article Modeling of the dynamic recrystallization behavior of Csf/AZ91D magnesium matrix composites during hot compression processWang, Zhenjun, Huang, Biao, Qi, Lehua, Wang, Gui and Dargusch, Matthew S. (2017). Modeling of the dynamic recrystallization behavior of Csf/AZ91D magnesium matrix composites during hot compression process. Journal of Alloys and Compounds, 708, 328-336. doi: 10.1016/j.jallcom.2017.03.010 |
|
2017 Journal Article Simulation of convective flow and thermal conditions during ultrasonic treatment of an Al-2Cu alloyWang, Gui, Croaker, Paul, Dargusch, Matthew, McGuckin, Damian and StJohn, David (2017). Simulation of convective flow and thermal conditions during ultrasonic treatment of an Al-2Cu alloy. Computational Materials Science, 134, 116-125. doi: 10.1016/j.commatsci.2017.03.041 |
|
2017 Journal Article Manufacturing of biocompatible porous titanium scaffolds using a novel spherical sugar pellet space holderChen, Yunhui, Kent, Damon, Bermingham, Michael, Dehghan-Manshadi, Ali and Dargusch, Matthew (2017). Manufacturing of biocompatible porous titanium scaffolds using a novel spherical sugar pellet space holder. Materials Letters, 195, 92-95. doi: 10.1016/j.matlet.2017.02.092 |
|
2017 Journal Article The corrosion behaviours of plasma-sprayed Fe-based amorphous coatingsJiang, Chaoping, Liu, Wangqiang, Wang, Gui, Chen, Yongnan, Xing, Yazhe, Zhang, Chunhua and Dargusch, Matthew (2017). The corrosion behaviours of plasma-sprayed Fe-based amorphous coatings. Surface Engineering, 34 (8), 1-6. doi: 10.1080/02670844.2017.1319647 |
