|
2016 Conference Publication Progressive matrix cracking induced delamination: A comparison of finite element modelling techniquesReiner, J., Veidt, M., Dargusch, M. and Gross, L. (2016). Progressive matrix cracking induced delamination: A comparison of finite element modelling techniques. 17th European Conference on Composite Materials, ECCM 2016, Munich, Germany, 26 - 30 June 2016. Munich, Germany: European Conference on Composite Materials, ECCM. |
|
2015 Journal Article Stress corrosion cracking of high-strength AZ31 processed by high-ratio differential speed rollingShi, Zhiming, Kim, W. J., Cao, Fuyong, Dargusch, Matthew S. and Atrens, Andrej (2015). Stress corrosion cracking of high-strength AZ31 processed by high-ratio differential speed rolling. Journal of Magnesium and Alloys, 3 (4), 271-282. doi: 10.1016/j.jma.2015.11.006 |
|
2015 Journal Article An investigation of the mechanical behaviour of fine tubes fabricated from a Ti-25Nb-3Mo-3Zr-2Sn alloyZhang, Yaowu, Kent, Damon, Wang, Gui, St John, David and Dargusch, Matthew (2015). An investigation of the mechanical behaviour of fine tubes fabricated from a Ti-25Nb-3Mo-3Zr-2Sn alloy. Materials and Design, 85, 256-265. doi: 10.1016/j.matdes.2015.06.127 |
|
2015 Journal Article The Dependence of Isothermal ω Precipitation on the Quenching Rate in a Metastable β-Ti AlloyChen, Jing, Xiao, Wenlong, Dargusch, Matthew Simon and Ma, Chaoli (2015). The Dependence of Isothermal ω Precipitation on the Quenching Rate in a Metastable β-Ti Alloy. Scientific Reports, 5 (Art No.: 14632) 14632, 14632. doi: 10.1038/srep14632 |
|
2015 Journal Article On the deformation mechanisms and strain rate sensitivity of a metastable β Ti-Nb alloyZhan, Hongyi, Zeng, Weidong, Wang, Gui, Kent, Damon and Dargusch, Matthew (2015). On the deformation mechanisms and strain rate sensitivity of a metastable β Ti-Nb alloy. Scripta Materialia, 107, 34-37. doi: 10.1016/j.scriptamat.2015.05.014 |
|
2015 Journal Article Stress corrosion cracking of several hot-rolled binary Mg-X alloysCao, Fuyong, Shi, Zhiming, Song, Guang-Ling, Liu, Ming, Dargusch, Matthew S. and Atrens, Andrej (2015). Stress corrosion cracking of several hot-rolled binary Mg-X alloys. Corrosion Science, 98, 6-19. doi: 10.1016/j.corsci.2015.04.023 |
|
2015 Journal Article Tool wear mechanisms involved in crater formation on uncoated carbide tool when machining Ti6Al4V alloyRahman Rashid, R. A., Palanisamy, S., Sun, S. and Dargusch, M. S. (2015). Tool wear mechanisms involved in crater formation on uncoated carbide tool when machining Ti6Al4V alloy. International Journal of Advanced Manufacturing Technology, 83 (9-12), 1-9. doi: 10.1007/s00170-015-7668-z |
|
2015 Journal Article Cutting force, chip formation, and tool wear during the laser-assisted machining a near-alpha titanium alloy BTi-6431SGao, Yanfeng, Wang, Gui, Bermingham, Michael J. and Dargusch, Matthew S. (2015). Cutting force, chip formation, and tool wear during the laser-assisted machining a near-alpha titanium alloy BTi-6431S. International Journal of Advanced Manufacturing Technology, 79 (9-12), 1949-1960. doi: 10.1007/s00170-015-6917-5 |
|
2015 Journal Article Evaluation of magnesium die-casting alloys for elevated temperature applications: microstructure, tensile properties, and creep resistanceZhu, Suming, Easton, Mark A., Abbott, Trevor B., Nie, Jian-Feng, Dargusch, Matthew S., Hort, Norbert and Gibson, Mark A. (2015). Evaluation of magnesium die-casting alloys for elevated temperature applications: microstructure, tensile properties, and creep resistance. Metallurgical and Materials Transactions A, 46 (8), 3543-3554. doi: 10.1007/s11661-015-2946-9 |
|
2015 Journal Article Effect of cryogenic compressed air on the evolution of cutting force and tool wear during machining of Ti-6Al-4V alloySun, Shoujin, Brandt, Milan, Palanisamy, Suresh and Dargusch, Matthew S (2015). Effect of cryogenic compressed air on the evolution of cutting force and tool wear during machining of Ti-6Al-4V alloy. Journal of Materials Processing Technology, 221 (9), 243-254. doi: 10.1016/j.jmatprotec.2015.02.017 |
|
2015 Journal Article HAADF-STEM study of phase separation and the subsequent α phase precipitation in a β-Ti alloyZhu, Y. M., Zhu, S. M., Dargusch, M. S. and Nie, J. F. (2015). HAADF-STEM study of phase separation and the subsequent α phase precipitation in a β-Ti alloy. Scripta Materialia, 112, 46-49. doi: 10.1016/j.scriptamat.2015.09.007 |
|
2015 Journal Article Controlling the microstructure and properties of wire arc additive manufactured Ti–6Al–4V with trace boron additionsBermingham, M. J., Kent, D., Zhan, H., StJohn, D. H. and Dargusch, M. S. (2015). Controlling the microstructure and properties of wire arc additive manufactured Ti–6Al–4V with trace boron additions. Acta Materialia, 91, 289-303. doi: 10.1016/j.actamat.2015.03.035 |
|
2015 Journal Article Influence of casting porosity on the corrosion behaviour of Mg0.1SiCao, Fuyong, Shi, Zhiming, Song, Guang-Ling, Liu, Ming, Dargusch, Matthew S. and Atrens, Andrej (2015). Influence of casting porosity on the corrosion behaviour of Mg0.1Si. Corrosion Science, 94, 255-269. doi: 10.1016/j.corsci.2015.02.002 |
|
2015 Journal Article A new understanding of the wear processes during laser assisted milling 17-4 precipitation hardened stainless steelBermingham, M. J., Kent, D. and Dargusch, M. S. (2015). A new understanding of the wear processes during laser assisted milling 17-4 precipitation hardened stainless steel. Wear, 328-329, 518-530. doi: 10.1016/j.wear.2015.03.025 |
|
2015 Journal Article Microstructural characteristics of adiabatic shear localization in a metastable beta titanium alloy deformed at high strain rate and elevated temperaturesZhan, Hongyi, Zeng, Weidong, Wang, Gui, Kent, Damon and Dargusch, Matthew (2015). Microstructural characteristics of adiabatic shear localization in a metastable beta titanium alloy deformed at high strain rate and elevated temperatures. Materials Characterization, 102 7820, 103-113. doi: 10.1016/j.matchar.2015.02.017 |
|
2015 Journal Article Review of recent developments in the field of magnesium corrosionAtrens, Andrej, Song, Guang-Ling, Liu, Ming, Shi, Zhiming, Cao, Fuyong and Dargusch, Matthew S. (2015). Review of recent developments in the field of magnesium corrosion. Advanced Engineering Materials, 17 (4), 400-453. doi: 10.1002/adem.201400434 |
|
2015 Journal Article Corrosion and stress corrosion cracking of ultra-high-purity Mg5ZnShi, Zhiming, Hofstetter, Joelle, Cao, Fuyong, Uggowitzer, Peter J., Dargusch, Matthew S. and Atrens, Andrej (2015). Corrosion and stress corrosion cracking of ultra-high-purity Mg5Zn. Corrosion Science, 93, 330-335. doi: 10.1016/j.corsci.2015.01.032 |
|
2015 Journal Article The mechanism of ω-assisted α phase formation in near β-Ti alloysLi, Tong, Kent, Damon, Sha, Gang, Dargusch, Matthew S. and Cairney, Julie M. (2015). The mechanism of ω-assisted α phase formation in near β-Ti alloys. Scripta Materialia, 104, 75-78. doi: 10.1016/j.scriptamat.2015.04.007 |
|
2015 Journal Article Evolution of the microstructure and mechanical properties during fabrication of mini-tubes from a biomedical beta-titanium alloyZhang, Yaowu, Kent, Damon, Wang, Gui, St John, David and Dargusch, Matthew (2015). Evolution of the microstructure and mechanical properties during fabrication of mini-tubes from a biomedical beta-titanium alloy. Journal of the Mechanical Behavior of Biomedical Materials, 42, 207-218. doi: 10.1016/j.jmbbm.2014.11.013 |
|
2015 Journal Article Tool life and wear mechanisms in laser assisted milling Ti-6Al-4VBermingham, M. J., Sim, W. M., Kent, D., Gardiner, S. and Dargusch, M. S. (2015). Tool life and wear mechanisms in laser assisted milling Ti-6Al-4V. Wear, 322-323, 151-163. doi: 10.1016/j.wear.2014.11.001 |
