Emeritus Professor Andrej Atrens
Emeritus Professor

Andrej Atrens

Email: 
Phone: 
+61 7 336 53748

Background

Prof Andrej Atrens's research interests are in: the service performance of engineering materials and alloy development.

He received a PhD from the University of Adelaide in 1976, a DEng from the University of Queensland in 1997, and became FHEA in 2018.

His current research projects are in the fields of:

  • Mg Corrosion
  • SCC
  • Hydrogen embrittlement

Availability

Emeritus Professor Andrej Atrens is:
Available for supervision
Media expert

Fields of research

Materials engineering

Qualifications

  • Bachelor (Honours) of Science (Advanced), University of Adelaide
  • Doctor of Philosophy, University of Adelaide
  • Postgraduate Diploma in Education, The University of Queensland
  • Doctoral Diploma of Engineering, The University of Queensland
  • Australian Institute of Physics, Australian Institute of Physics
  • Engineers Australia, Engineers Australia
  • Fellow, Higher Education Academy, Higher Education Academy

Research interests

  • Mg Corrosion

  • Hydrogen Embrittlenent

  • Stress Corrosion cracking

Research impacts

Atrens has made significant contributions to the understanding of the service performance of engineering materials. This includes:

  • Related electrochemical hydrogen charging to equivalent hydrogen fugacity.
  • Demonstrated that there is little risk in auto service of HE for the advanced high-strength steels currently used in automobile light-weighting,
  • Elucidated corrosion mechanisms of magnesium alloys, stainless steels and copper alloys,
  • Developed a model for the patination of copper, and a procedure for an artificial patination process,
  • Developed an improved understanding of passivity in stainless steels and binary alloys such as Fe-Cr, Ni-Cr, Co-Cr, Fe-Ti, and Fe-Si.
  • Characterised the corrosion reactions, types of corrosion and the corrosion morphologies for Mg alloys and related these to alloy chemistry, metallurgy and microstructure.
  • Help to provide an understanding of the biocorrosion of Mg.
  • Produced a comprehensive explanation of the strange electrochemical behaviour of the negative difference effect, which underlies the corrosion behaviour of magnesium and its alloys.

Search Professor Andrej Atrens’s works on UQ eSpace

540 works between 1974 and 2025
All (540) Journal Article (454) Book Chapter (17) Conference Publication (62) Book (1) Other Outputs (6)

321 - 340 of 540 works

2011

Conference Publication

Corrosion mechanism applicable to biodegradable magnesium implants

Atrens, Andrej, Liu, Ming and Zainal Abidin, Nor Ishida (2011). Corrosion mechanism applicable to biodegradable magnesium implants. 2nd Symposium on Biodegradable Metals, Maratea, Italy, 31 August –3 September 2010. Lausanne, Switzerland: Elsevier. doi: 10.1016/j.mseb.2010.12.017

Corrosion mechanism applicable to biodegradable magnesium implants

2011

Book Chapter

Corrosion of magnesium (Mg) alloys and metallurgical influence

Atrens, A., Liu, M., Zainal Abidin, N. I. and Song, G. -L. (2011). Corrosion of magnesium (Mg) alloys and metallurgical influence. Corrosion of magnesium alloys. (pp. 117-165) edited by Guang-Ling Song. Cambridge, United Kingdom: Woodhead Publishing.

Corrosion of magnesium (Mg) alloys and metallurgical influence

2011

Conference Publication

Magnesium corrosion in different solutions

Abidin, Nor Ishida Zainal, Martin, Darren and Atrens, Andrejs (2011). Magnesium corrosion in different solutions. 5th International Conference on Light Metals Technology, Luneburg, Germany, 19-22 July 2011. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.690.369

Magnesium corrosion in different solutions

2011

Book Chapter

Numerical modelling of galvanic corrosion of magnesium (Mg) alloys

Atrens, A., Shi, Z. and Song, G. -L. (2011). Numerical modelling of galvanic corrosion of magnesium (Mg) alloys. Corrosion of magnesium alloys. (pp. 455-483) edited by Guang-Ling Song. Cambridge, United Kingdom: Woodhead Publishing. doi: 10.1533/9780857091413.3.455

Numerical modelling of galvanic corrosion of magnesium (Mg) alloys

2011

Book Chapter

Stress corrosion cracking (SCC) of magnesium alloys

Atrens, A., Dietzel, W., Bala Srinivasan, P., Winzer, N. and Bobby Kannan, M. (2011). Stress corrosion cracking (SCC) of magnesium alloys. Stress corrosion cracking: Theory and practice. (pp. 341-380) edited by Raja, V. S. and Shoji, T.. Cambridge, United Kingdom: Woodhead Publishing. doi: 10.1533/9780857093769.3.341

Stress corrosion cracking (SCC) of magnesium alloys

2010

Conference Publication

Overview of stress corrosion cracking of magnesium alloys

Atrens, Andrej, Winzer, Nicholas and Dietzel, Wolfgang (2010). Overview of stress corrosion cracking of magnesium alloys.

Overview of stress corrosion cracking of magnesium alloys

2010

Conference Publication

Corrosion of magnesium-yttrium alloys

Liu, Ming, Schmutz, Patrik, Uggowitzer, Peter J and Atrens, Andrej (2010). Corrosion of magnesium-yttrium alloys.

Corrosion of magnesium-yttrium alloys

2010

Journal Article

Influence of Si on glass forming ability and properties of the bulk amorphous alloy Mg60Cu30Y10

Liu, K. M., Zhou, H. T., Yang, B., Lu, D. P. and Atrens, A. (2010). Influence of Si on glass forming ability and properties of the bulk amorphous alloy Mg60Cu30Y10. Materials Science and Engineering: A, 527 (29-30), 7475-7479. doi: 10.1016/j.msea.2010.08.030

Influence of Si on glass forming ability and properties of the bulk amorphous alloy Mg60Cu30Y10

2010

Journal Article

The influence of yttrium (Y) on the corrosion of Mg-Y binary alloys

Liu, Ming, Schmutz, Patrik, Uggowitzer, Peter J., Song, Guangling and Atrens, Andrej (2010). The influence of yttrium (Y) on the corrosion of Mg-Y binary alloys. Corrosion Science, 52 (11), 3687-3701. doi: 10.1016/j.corsci.2010.07.019

The influence of yttrium (Y) on the corrosion of Mg-Y binary alloys

2010

Journal Article

ChemInform Abstract: The Electrochemical Corrosion of Pure Magnesium in 1 N NaCl

Song, G., Atrens, A., StJohn, D., Nairn, J. and Li, Y. (2010). ChemInform Abstract: The Electrochemical Corrosion of Pure Magnesium in 1 N NaCl. ChemInform, 28 (31), 1-1. doi: 10.1002/chin.199731028

ChemInform Abstract: The Electrochemical Corrosion of Pure Magnesium in 1 N NaCl

2010

Journal Article

Effect of Ag micro-alloying on the microstructure and properties of Cu-14Fe in situ composite

Liu, K.M., Lu, D.P., Zhou, H.T., Atrens, A., Zou, J., Yang, Y.L. and Zeng, S.M. (2010). Effect of Ag micro-alloying on the microstructure and properties of Cu-14Fe in situ composite. Materials Science And Engineering A-structural Materials Properties Microstructure And Processing, 527 (18-19), 4953-4958. doi: 10.1016/j.msea.2010.04.051

Effect of Ag micro-alloying on the microstructure and properties of Cu-14Fe in situ composite

2010

Journal Article

Influence of Ag micro-alloying on the microstructure and properties of Cu-7Cr in situ composite

Liu, Keming, Lu, Deping, Zhou, Haitao, Atrens, Andrej, Chen, Zhibao, Zou, Jin and Zeng, Sumin (2010). Influence of Ag micro-alloying on the microstructure and properties of Cu-7Cr in situ composite. Journal of Alloys And Compounds, 500 (2), L22-L25. doi: 10.1016/j.jallcom.2010.03.246

Influence of Ag micro-alloying on the microstructure and properties of Cu-7Cr in situ composite

2010

Journal Article

The influence of applied stress rate on the stress corrosion cracking of 4340 and 3.5NiCrMoV steels in distilled water at 30 °C

Ramamurthy, S. and Atrens, A. (2010). The influence of applied stress rate on the stress corrosion cracking of 4340 and 3.5NiCrMoV steels in distilled water at 30 °C. Corrosion Science, 52 (3), 1042-1051. doi: 10.1016/j.corsci.2009.11.033

The influence of applied stress rate on the stress corrosion cracking of 4340 and 3.5NiCrMoV steels in distilled water at 30 °C

2010

Journal Article

Influence of microstructure on tensile properties and fatigue crack growth in extruded magnesium alloy AM60

Zeng, Rongchang, Han, Enhou, Ke, Wei, Dietzel, Wolfgang, Kainer, Karl Ulrich and Atrens, Andrejs (2010). Influence of microstructure on tensile properties and fatigue crack growth in extruded magnesium alloy AM60. International Journal of Fatigue, 32 (2), 411-419. doi: 10.1016/j.ijfatigue.2009.07.021

Influence of microstructure on tensile properties and fatigue crack growth in extruded magnesium alloy AM60

2010

Journal Article

Electrochemical reactivity, surface composition and corrosion mechanisms of the complex metallic alloy Al3Mg2

Liu, Ming, Schmutz, Patrik, Zanna, Sandrine, Seyeux, Antoine, Ardelean, Helene, Song, Guangling, Atrens, Andrej and Marcus, Philippe (2010). Electrochemical reactivity, surface composition and corrosion mechanisms of the complex metallic alloy Al3Mg2. Corrosion Science, 52 (2), 562-578. doi: 10.1016/j.corsci.2009.10.015

Electrochemical reactivity, surface composition and corrosion mechanisms of the complex metallic alloy Al3Mg2

2010

Journal Article

Measurement of the corrosion rate of magnesium alloys using Tafel extrapolation

Shi, Zhiming, Liu, Ming and Atrens, Andrej (2010). Measurement of the corrosion rate of magnesium alloys using Tafel extrapolation. Corrosion Science, 52 (2), 579-588. doi: 10.1016/j.corsci.2009.10.016

Measurement of the corrosion rate of magnesium alloys using Tafel extrapolation

2010

Journal Article

Effect of trace Ag addition on microstructure and properties of Cu-Fe in-situ composites

Liu, K.-M., Zhou, H.-T., Lu, D.-P., Atrens A., Zou, J., Chen, Z.-B. and Xie, S.-F. (2010). Effect of trace Ag addition on microstructure and properties of Cu-Fe in-situ composites. Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 31 (6), 62-67.

Effect of trace Ag addition on microstructure and properties of Cu-Fe in-situ composites

2009

Journal Article

Corrosion protection of AZ91 magnesium alloy by anodizing in niobium and zirconium-containing electrolytes

Ardelean, H., Frateur, I., Zanna, S., Atrens, A. and Marcus, P. (2009). Corrosion protection of AZ91 magnesium alloy by anodizing in niobium and zirconium-containing electrolytes. CORROSION SCIENCE, 51 (12), 3030-3038. doi: 10.1016/j.corsci.2009.08.030

Corrosion protection of AZ91 magnesium alloy by anodizing in niobium and zirconium-containing electrolytes

2009

Journal Article

ToF-SIMS depth profile of the surface film on pure magnesium formed by immersion in pure water and the identification of magnesium hydride

Seyeux, A., Liu, M., Schmutz, P., Song, G.L., Atrens, A. and Marcus, P. (2009). ToF-SIMS depth profile of the surface film on pure magnesium formed by immersion in pure water and the identification of magnesium hydride. Corrosion Science, 51 (9), 1883-1886. doi: 10.1016/j.corsci.2009.06.002

ToF-SIMS depth profile of the surface film on pure magnesium formed by immersion in pure water and the identification of magnesium hydride

2009

Journal Article

Influence of heat treatment and microstructure on the corrosion of magnesium alloy Mg-10Gd-3Y-0.4Zr

Peng, L.M., Chang, J.W., Guo, X.W., Atrens, A., Ding, W.J. and Peng, Y.H. (2009). Influence of heat treatment and microstructure on the corrosion of magnesium alloy Mg-10Gd-3Y-0.4Zr. JOURNAL OF APPLIED ELECTROCHEMISTRY, 39 (6), 913-920. doi: 10.1007/s10800-008-9739-4

Influence of heat treatment and microstructure on the corrosion of magnesium alloy Mg-10Gd-3Y-0.4Zr

Current funding

  • 2023 - 2026
    Making Strong Alloys Ductile and Hydrogen-Tolerant via Tuning Nanogradients (ARC Discovery Project administered by The University of Sydney)
    University of Sydney
    Open grant
  • 2023 - 2025
    Nanoarchitectured anti-corrosion coatings for zinc-plated steel
    ARC Linkage Projects
    Open grant
  • 2022 - 2026
    Feasibility of the use of gas phase inhibition of hydrogen embrittlement in gas transmission pipelines carrying hydrogen
    Future Fuels CRC Ltd
    Open grant

Past funding

  • 2022 - 2023
    An in-situ and multiscale scanning electron microscopy suite (ARC LIEF administered by Monash University)
    Monash University
    Open grant
  • 2022 - 2023
    Development of Optimum Process Conditions for preventing Hydrogen Embrittlement of Hot Stamped Parts
    Hyundai (Korea)
    Open grant
  • 2022 - 2025
    Hydrogen and pipeline steels: Orientation dependence of fracture toughness
    Future Fuels CRC Ltd
    Open grant
  • 2021
    Thermite welded electrical conductor to gas pipeline - literature
    Future Fuels CRC Ltd
    Open grant
  • 2020 - 2025
    Hydrogen embrittlement of pipeline steels, subcritical crack growth (formation) and critical crack growth (initiation)
    Future Fuels CRC Ltd
    Open grant
  • 2020 - 2023
    Improved corrosion performance of new anodised coatings on cast magnesium alloys EV31A and WE43B for Defence Aerospace Platforms
    Defence Materials Technology Centre
    Open grant
  • 2020
    Research collaboration in the area of magnesium corrosion
    Northeastern University
    Open grant
  • 2020 - 2024
    Design of Cost-effective Compositionally Complex Alloys
    ARC Discovery Projects
    Open grant
  • 2018 - 2019
    Understanding the influence of sterilization on the corrosion and mechanical properties of degradable magnesium orthopaedic screws
    Syntellix AG
    Open grant
  • 2017 - 2022
    Depressing pyrite in selective flotation of complex polymetallic ores
    ARC Linkage Projects
    Open grant
  • 2017 - 2021
    Development of Innovative Technologies for Quality Control of Large Size Ocean Steel Plates
    HBIS Group Co, Ltd
    Open grant
  • 2017 - 2020
    Biodegradable magnesium alloy scaffolds for bone tissue engineering (ARC Discovery Project administered by RMIT University)
    Royal Melbourne Institute of Technology University
    Open grant
  • 2017 - 2021
    Hydrogen embrittlement and hydrogen-influenced low-cycle fatigue of advanced h-strength steels and parts for auto service
    Baosteel-Australia Joint Research and Development
    Open grant
  • 2015 - 2019
    Processing, corrosion and characterisation challenges
    Defence Materials Technology Centre
    Open grant
  • 2015 - 2019
    Novel biocompatible nickel-free shape memory alloy scaffolds for biomedical applications (NHMRC Project Grant administered by RMIT)
    Royal Melbourne Institute of Technology University
    Open grant
  • 2014 - 2015
    Advanced Laser Additive Manufacturing System for Extended Applications to Surface Engineering, Direct Manufacturing and New Alloy Development
    ARC Linkage Infrastructure, Equipment and Facilities
    Open grant
  • 2014 - 2018
    A fast, eco-friendly approach to the fabrication of low cost high performance titanium components
    ARC Linkage Projects
    Open grant
  • 2014 - 2017
    Influence of hydrogen on steel for auto construction
    Baoshan Iron and Steel Co Ltd
    Open grant
  • 2013 - 2014
    Australia- China Research Centre for Light Metals (ACCLiM) (DIICCSRTE funded project led by Monash University)
    Monash University
    Open grant
  • 2013 - 2016
    Novel approach to grain refinement for continuous casting and ingot casting of steels
    Baoshan Iron and Steel Co Ltd
    Open grant
  • 2012 - 2015
    Surface Engineering of Cast Magnesium Alloys for Innovative High Performance Packaging Robots
    ARC Linkage Projects
    Open grant
  • 2012
    An integrated electrochemical device assembly and testing system
    UQ Major Equipment and Infrastructure
    Open grant
  • 2011 - 2013
    Flotation separation of As sulphide minerals from Cu-As ores and concentrates
    UQ Collaboration and Industry Engagement Fund
    Open grant
  • 2011
    Advanced Facility For Transmission Electron Microscopy Specimen Preparation
    UQ Major Equipment and Infrastructure
    Open grant
  • 2010 - 2024
    Interaction of galvanic corrosion and stress corrosion cracking for Mg alloys and alloying influences
    General Motors Corporation USA
    Open grant
  • 2010 - 2012
    Advanced Foundry Technologies
    CRC Alloy & Solidification Technology (CAST)
    Open grant
  • 2009 - 2012
    Influence of hydrogen on metallic components for clean energy
    ARC Linkage Projects
    Open grant
  • 2009 - 2012
    Coatings for Magnesium components and asset protection
    CRC Alloy & Solidification Technology (CAST)
    Open grant
  • 2008 - 2011
    Rail squats
    CRC for Railway Engineering and Technologies
    Open grant
  • 2005 - 2014
    ARC Centre of Excellence for Design in Light Metals (ARC COE administered by Monash University)
    Monash University
    Open grant
  • 2004 - 2007
    Fundamental understanding of the environmental factors essential for environmental assisted fracture (EAF) of cast magnesium alloys
    ARC Linkage Projects
    Open grant
  • 2004 - 2006
    Metallurgical Influences on Stress Corrosion Cracking (SCC) of Rock Bolts
    ARC Linkage Projects
    Open grant
  • 2003 - 2005
    Understanding corrosion in HPC plants to optimise life cycle costs
    Santos Ltd
    Open grant
  • 2002 - 2003
    Use of APFIM to measure carbon segregation at ferrite:ferrite grain boundaries of pipeline steel and its relationship to service failures by stress corrosion cracking
    Australian Academy of Science
    Open grant
  • 2002
    To access the atom probe field ion microscope to carry out critical measurements to develop understanding of the mechanism for the service stress corrosion cracking of pipeline steels.
    UQ Travel Grants Scheme
    Open grant
  • 2000
    Measurement of grain boundary carbon concentration for pipeline steels and its relation to intergranular stress corrosion cracking (SCC)
    Australian Institute of Nuclear Science and Engineering
    Open grant
  • 2000 - 2002
    Stress corrosion cracking fracture of rock bolts
    ARC Collaborative Grant (SPIRT)
    Open grant
  • 2000 - 2002
    Stress corrosion cracking fracture of rock bolts
    ANI Arnall
    Open grant
  • 1999 - 2003
    Collaborative Study of Intergranular Crack Path for Service Stress Corrosion Cracking in Pipeline Steels
    Collaborative/Consortium
    Open grant
  • 1999 - 2001
    Collaborative study of the intergranular crack path for service stress corrosion cracking of pipeline steels
    ARC Collaborative Grant (SPIRT)
    Open grant
  • 1998
    Strain gradient plasticity - an experimental examination of critical aspects
    ARC Australian Research Council (Small grants)
    Open grant
  • 1997
    Grain boundary characterisation and its relationship to stress corrosion cracking for high strength steels
    UQ External Support Enabling Grant
    Open grant
  • 1995 - 1997
    Artificial and accelerated patination
    ARC Collaborative Grant (SPIRT)
    Open grant

Availability

Emeritus Professor Andrej Atrens is:
Available for supervision

Before you email them, read our advice on how to contact a supervisor.

Available projects

  • Thesis Project

    The aim is to provide an overview and summary of the state of art and description of key technical challenges, drivers and trends emerging in the technology/sector.

    The total topic is huge so it is necessary to target one part. A possible approach is to look at a particular number of sectors. Sectors can be defined in a number of ways.

    1. Focus on the manufacturing process: Casting, Shaping and forming, machining, Fabrication, Fabrication of microelectronic devices and micromanufacturing, Joining, Surface Technology, Composites, Ceramics, Wood, Concrete
    1. Focus on the industry or industry sector: Aerospace, auto, microelectronic or consumer electronics, consumer goods etc.

    A number of these sectors need to be chosen and analysed. For each sector an overview/summary is to be provided together with the references of where the information was obtained.

  • Gas Phase Inhibition of Hydrogen Embrittlement

    We aim to understand the kinetics of the inhibition of hydrogen embrittlement in hydrogen gas environments by added gases such as oxygen.

    We are building a gas phase permeabilty apparatus capable of operating at 200 C and 200 bar hydrogen

Supervision history

Current supervision

  • Doctor Philosophy

    Feasibility of the use of gas phase inhibition of hydrogen embrittlement in gas transmission pipelines carrying hydrogen

    Principal Advisor

    Other advisors: Dr Jeffrey Venezuela

  • Master Philosophy

    Hydrogen and pipeline steels; orientation dependence of fracture toughness

    Principal Advisor

    Other advisors: Dr Jeffrey Venezuela

  • Doctor Philosophy

    Hydrogen embrittlement of pipeline steels, subcritical crack evaluation

    Principal Advisor

    Other advisors: Dr Jeffrey Venezuela

  • Doctor Philosophy

    Hydrogen embrittlement of pipeline steels

    Principal Advisor

    Other advisors: Dr Jeffrey Venezuela

  • Doctor Philosophy

    Strong Hydrogen-Tolerant Steels via Tuning Nanogradients

    Principal Advisor

    Other advisors: Dr Jeffrey Venezuela

  • Doctor Philosophy

    Hydrogen Embrittlement of Additively Manufactured Advanced Structural Materials

    Associate Advisor

    Other advisors: Dr Qiyang Tan, Dr Jeffrey Venezuela, Professor Mingxing Zhang

  • Doctor Philosophy

    The influence of long-term degradation effects on the hydrogen embrittlement of pipeline steels used in hydrogen transportation

    Associate Advisor

    Other advisors: Professor Matthew Dargusch, Dr Jeffrey Venezuela

Completed supervision

Enquiries

Contact Emeritus Professor Andrej Atrens directly for media enquiries about:

  • Corrosion
  • Hydrogen embrittlement
  • Magnesium corrosion

Need help?

For help with finding experts, story ideas and media enquiries, contact our Media team:

communications@uq.edu.au