Professor Amin Abbosh
Professor

Amin Abbosh

Email: 
Phone: 
+61 7 334 67936

Background

Prof. Amin Abbosh specializes in Medical Microwave Imaging and Microwave and Millimeter-wave Engineering. His work focuses on designing and developing advanced imaging and sensing systems using electromagnetic techniques at radio-wave frequencies.

Prof. Abbosh’s significant contributions include the creation of innovative imaging systems that leverage his expertise in applied electromagnetics and microwave engineering. He has developed comprehensive analytical and computational frameworks, incorporating signal-processing techniques for detection and AI for classification. This approach has led to a new modality for detection and imaging, combining physics-guided and data-driven methods. His work is protected by over 16 patents.

In Communication Technologies, Prof. Abbosh's work focuses on designing flat-panel, low-cost reconfigurable antennas. These antennas form ground satellite terminals that communicate with low-earth-orbit (LEO) satellites, providing reliable broadband access to remote and regional communities. This technology supports e-health services, distance education, and business productivity, and can be used in various on-the-move environments.

Availability

Professor Amin Abbosh is:
Available for supervision
Media expert

Fields of research

Biomedical engineering Engineering

Qualifications

  • Bachelor of Science, University of Mosul
  • Masters (Coursework) of Science, University of Mosul
  • Doctor of Philosophy, University of Mosul
  • Postgraduate Diploma in Higher Education, The University of Queensland
  • Doctor of Philosophy, The University of Queensland

Research interests

  • Electromagnetic Medical Imaging

    Electromagnetic Medical Imaging Systems including hardware (microwave devices and antennas), applied electromagnetic, computational electromagnetic, signal processing, and artificial intelligence

  • Microwave Engineering

    Antennas, microwave devices

  • Engineering Electromagnetics

    Applied Electromagnetics in Electrical and Biomedical Engineering

  • Artificial Intelligence

    AI in Electromagnetics and Microwave Engineering

Search Professor Amin Abbosh’s works on UQ eSpace

628 works between 1985 and 2025
All (628) Journal Article (348) Book Chapter (3) Conference Publication (264) Other Outputs (13)

361 - 380 of 628 works

2015

Conference Publication

Wavelet-based compressive sensing for head imaging

Guo, Lei and Abbosh, A. M. (2015). Wavelet-based compressive sensing for head imaging. International Symposium on Antennas and Propagation (ISAP), Hobart, TAS, Australia, 9-12 November 2015. Piscataway, NJ, United States: IEEE.

Wavelet-based compressive sensing for head imaging

2015

Conference Publication

Low-cost ka-band reconfigurable planar antenna for satellite-on-the-move application

Wang, Yifan, Abbosh, Amin, Ness, John and Gilmore, Rowan (2015). Low-cost ka-band reconfigurable planar antenna for satellite-on-the-move application. AIAA International Communications Satellite Systems Conference and Exhibition, Brisbane, Australia, 7-10 September 2015. Reston, Virginia: American Institute of Aeronautics and Astronautics Inc, AIAA. doi: 10.2514/6.2015-4354

Low-cost ka-band reconfigurable planar antenna for satellite-on-the-move application

2014

Journal Article

Microwave System for the Early Stage Detection of Congestive Heart Failure

Rezaeieh, Sasan Ahdi, Bialkowski, Konstanty S. and Abbosh, Amin M. (2014). Microwave System for the Early Stage Detection of Congestive Heart Failure. IEEE Access, 2 6884768, 921-929. doi: 10.1109/ACCESS.2014.2352614

Microwave System for the Early Stage Detection of Congestive Heart Failure

2014

Journal Article

Wideband unidirectional antenna of folded structure in microwave system for early detection of congestive heart failure

Rezaeieh, S.Ahdi, Abbosh, A. and Wang, Y. (2014). Wideband unidirectional antenna of folded structure in microwave system for early detection of congestive heart failure. IEEE Transactions on Antennas and Propagation, 62 (10) 2342756, 5375-5379. doi: 10.1109/TAP.2014.2342756

Wideband unidirectional antenna of folded structure in microwave system for early detection of congestive heart failure

2014

Journal Article

Three-dimensional open-ended slot antenna for heart failure detection system employing differential technique

Ahdi Rezaeieh, S., Bialkowski, K. S. and Abbosh, A. M. (2014). Three-dimensional open-ended slot antenna for heart failure detection system employing differential technique. IEEE Antennas and Wireless Propagation Letters, 13 6891151, 1753-1756. doi: 10.1109/LAWP.2014.2354042

Three-dimensional open-ended slot antenna for heart failure detection system employing differential technique

2014

Journal Article

Ultra-wideband unequal in-phase power divider using three-line coupled structure

Zhu, H., Abbosh, A. and Guo, L. (2014). Ultra-wideband unequal in-phase power divider using three-line coupled structure. Electronics Letters, 50 (15), 1081-1082. doi: 10.1049/el.2014.1214

Ultra-wideband unequal in-phase power divider using three-line coupled structure

2014

Journal Article

Development of compact directional antenna utilising plane of symmetry for wideband brain stroke detection systems

Mobashsher, A. T. and Abbosh, A. (2014). Development of compact directional antenna utilising plane of symmetry for wideband brain stroke detection systems. Electronics Letters, 50 (12), 850-851. doi: 10.1049/el.2014.0616

Development of compact directional antenna utilising plane of symmetry for wideband brain stroke detection systems

2014

Journal Article

Folding method for bandwidth and directivity enhancement of meandered loop ultra-high frequency antenna for heart failure detection system

Rezaeieh, Sasan Ahdi, Bialkowski, Konstanty S. and Abbosh, Amin M. (2014). Folding method for bandwidth and directivity enhancement of meandered loop ultra-high frequency antenna for heart failure detection system. IET Microwaves, Antennas and Propagation, 8 (14), 1218-1227. doi: 10.1049/iet-map.2014.0340

Folding method for bandwidth and directivity enhancement of meandered loop ultra-high frequency antenna for heart failure detection system

2014

Journal Article

Planar wideband in-phase power divider using three-line coupled structure

Henin, Bassem and Abbosh, Amin (2014). Planar wideband in-phase power divider using three-line coupled structure. Microwave and Optical Technology Letters, 56 (4), 1010-1012. doi: 10.1002/mop.28247

Planar wideband in-phase power divider using three-line coupled structure

2014

Journal Article

Ultra-wideband in-phase power divider using stepped-impedance three-line coupled structure and microstrip-to-slotline transitions

Guo, L., Abbosh, A. and Zhu, H. (2014). Ultra-wideband in-phase power divider using stepped-impedance three-line coupled structure and microstrip-to-slotline transitions. Electronics Letters, 50 (5), 383-384. doi: 10.1049/el.2013.4160

Ultra-wideband in-phase power divider using stepped-impedance three-line coupled structure and microstrip-to-slotline transitions

2014

Journal Article

Realistic head phantom to test microwave systems for brain imaging

Mohammed, Beada'a J. and Abbosh, Amin M. (2014). Realistic head phantom to test microwave systems for brain imaging. Microwave and Optical Technology Letters, 56 (4), 979-982. doi: 10.1002/mop.28229

Realistic head phantom to test microwave systems for brain imaging

2014

Journal Article

CPW-fed low-profile directional antenna operating in low microwave band for wideband medical diagnostic systems

Mobashsher, A. T. and Abbosh, A. (2014). CPW-fed low-profile directional antenna operating in low microwave band for wideband medical diagnostic systems. Electronics Letters, 50 (4), 246-248. doi: 10.1049/el.2013.3909

CPW-fed low-profile directional antenna operating in low microwave band for wideband medical diagnostic systems

2014

Journal Article

Broadband planar circularly polarised antenna for ultra-high frequency applications

Rezaeieh, Sasan Ahdi, Abbosh, Amin and Antoniades, Marco A. (2014). Broadband planar circularly polarised antenna for ultra-high frequency applications. IET Microwaves, Antennas and Propagation, 8 (4), 263-271. doi: 10.1049/iet-map.2013.0249

Broadband planar circularly polarised antenna for ultra-high frequency applications

2014

Journal Article

Wideband and Unidirectional Folded Antenna for Heart Failure Detection System

Rezaeieh, S. Ahdi and Abbosh, A. M. (2014). Wideband and Unidirectional Folded Antenna for Heart Failure Detection System. IEEE Antennas and Wireless Propagation Letters, 13 6808409, 844-847. doi: 10.1109/LAWP.2014.2320495

Wideband and Unidirectional Folded Antenna for Heart Failure Detection System

2014

Conference Publication

Miniaturization techniques for antennas designed for microwave-based heart failure detection systems

Rezaeieh, S. A. and Abbosh A.M. (2014). Miniaturization techniques for antennas designed for microwave-based heart failure detection systems. 2014 IEEE Antennas and Propagation Society International Symposium, APSURSI 2014, Memphis, TN United States, 6-11 July 2014. Piscataway, NJ United States: I E E E. doi: 10.1109/APS.2014.6904591

Miniaturization techniques for antennas designed for microwave-based heart failure detection systems

2014

Conference Publication

Compact single-layer in-phase power divider employing microstrip to slotline transitions

Ahmed, U. Tania and Abbosh, A. M. (2014). Compact single-layer in-phase power divider employing microstrip to slotline transitions. 2014 1st Australian Microwave Symposium, AMS, Melbourne, Vic, Australia, 26-27 June 2014. Piscataway, NJ, United States: IEEE. doi: 10.1109/AUSMS.2014.7017342

Compact single-layer in-phase power divider employing microstrip to slotline transitions

2014

Conference Publication

Effects of antenna characteristics on performance of microwave based system designed for early stage congestive heart failure detection

Rezaeieh, S. Ahdi, Bialkowski, K. and Abbosh, A. M. (2014). Effects of antenna characteristics on performance of microwave based system designed for early stage congestive heart failure detection. 2014 1st Australian Microwave Symposium, AMS, Melbourne, Vic, Australia, 26-27 June 2014. Piscataway, NJ, United States: IEEE. doi: 10.1109/AUSMS.2014.7017353

Effects of antenna characteristics on performance of microwave based system designed for early stage congestive heart failure detection

2014

Conference Publication

Flexible CPW-IFA antenna array with reduced mutual coupling

Abbosh, Ayman I., Al-Rizzo, Hussain, Abushamleh, Said, Bihnam, Ayad and Khaleel, Haider R. (2014). Flexible CPW-IFA antenna array with reduced mutual coupling. IEEE Antennas-and-Propagation-Society International Symposium (APSURSI), Memphis, TN, United States, 06-11 July 2014. Piscataway, NJ, United States: Institute of Electrical and Electronics Engineers. doi: 10.1109/APS.2014.6905184

Flexible CPW-IFA antenna array with reduced mutual coupling

2014

Journal Article

Three-dimensional human head phantom with realistic electrical properties and anatomy

Mobashsher, A. T. and Abbosh, A. M. (2014). Three-dimensional human head phantom with realistic electrical properties and anatomy. IEEE Antennas and Wireless Propagation Letters, 13 6860287, 1401-1404. doi: 10.1109/LAWP.2014.2340409

Three-dimensional human head phantom with realistic electrical properties and anatomy

2014

Conference Publication

Compressive sensing for stroke detection in microwave-based head imaging

Guo, L. and Abbosh, A. M. (2014). Compressive sensing for stroke detection in microwave-based head imaging. 2014 IEEE Antennas and Propagation Society International Symposium, APSURSI 2014, Memphis, TN United States, 6-11 July 2014. Piscataway, NJ United States: Institute of Electrical and Electronics Engineers. doi: 10.1109/APS.2014.6905282

Compressive sensing for stroke detection in microwave-based head imaging

Current funding

  • 2025 - 2029
    Realtime Three-Dimensional Near-Field Microwave Imaging System
    ARC Discovery Projects
    Open grant
  • 2025 - 2029
    Minimally-Invasive Electromagnetic Haemoglobin Sensing
    NHMRC IDEAS Grants
    Open grant
  • 2025 - 2027
    Portable Electromagnetic Torso Scanner
    NHMRC IDEAS Grants
    Open grant
  • 2024 - 2027
    Next-Generation Solvers for Complex Microwave Engineering Problems
    ARC Discovery Projects
    Open grant
  • 2020 - 2028
    Microwave and Photonic Engineering and Applied Electromagnetics
    EM Solutions Pty Ltd
    Open grant

Past funding

  • 2021 - 2022
    Electromagnetic Scanner for Hepatic Steatosis Detection, Classification and Monitoring
    EMvision Medical Devices Ltd
    Open grant
  • 2020 - 2024
    Compact Millimeter-Wave Terminal for LEO Satellite Communications
    ARC Linkage Projects
    Open grant
  • 2019 - 2022
    Microwave Detection of Structural Degradations in Maritime Industry
    ARC Linkage Projects
    Open grant
  • 2019 - 2020
    Development Dielectric Sensor System on Intelligent Amphirols for Mud Farming Tailings Facilities
    Innovation Connections
    Open grant
  • 2018 - 2022
    High Quality and Robust Energy Conversion Systems for Distribution Networks
    ARC Linkage Projects
    Open grant
  • 2018 - 2019
    Broadband human tissue measurements enabled by a new triaxial near field probe
    Keysight Technologies Inc
    Open grant
  • 2018 - 2021
    Engineering the next generation of portable microwave scanners
    ARC Discovery Projects
    Open grant
  • 2018
    Imaging in the nano-scale age: terahertz and millimetre wave microanalysis
    UQ Major Equipment and Infrastructure
    Open grant
  • 2018 - 2022
    Portable brain scanner for early stroke detection and monitoring (CRC-P administered by EMVisions Medical Devices Ltd)
    EMvision Medical Devices Ltd
    Open grant
  • 2017 - 2018
    Portable microwave brain scanner
    UniQuest Pty Ltd
    Open grant
  • 2017 - 2020
    Positive Vehicle Identification with the use of smart sensors, a Transport and Population Research Network project
    UQ Vice-Chancellor's Strategic Initiatives
    Open grant
  • 2017 - 2018
    Development of millimetre-wave non-destructive testing system for marine infrastructure
    Innovation Connections
    Open grant
  • 2017 - 2018
    RFID Licence Plate Antenna
    Innovation Connections
    Open grant
  • 2017
    Advanced Pulsed Power: an emerging technology for science and engineering systems
    UQ Major Equipment and Infrastructure
    Open grant
  • 2016 - 2019
    In-Road Microwave System for Traffic Monitoring and Vehicle Identification
    ARC Linkage Projects
    Open grant
  • 2016 - 2019
    Reconfigurable Antennas for Satellite On-The-Move Communications
    ARC Linkage Projects
    Open grant
  • 2016 - 2017
    Road Curtain Intelligent Sensor
    Research Connections
    Open grant
  • 2016
    Millimetre Waves for Imaging and Sensing
    UQ Major Equipment and Infrastructure
    Open grant
  • 2015 - 2017
    Microwave Head Monitor Using Compressed Sensing and Differential Techniques
    ARC Discovery Projects
    Open grant
  • 2015 - 2017
    Portable Microwave Imaging Technology Using Reconfigurable Radar
    ARC Discovery Projects
    Open grant
  • 2014 - 2015
    Road Curtain Radar
    LicenSys Pty Ltd
    Open grant
  • 2014
    Portable Microwave System for Head Imaging and Stroke Detection
    Agilent Technologies Inc
    Open grant
  • 2014 - 2015
    Reconfigurable reflectarray for satellite on-the-move communication terminals
    UQ Collaboration and Industry Engagement Fund - Seed Research Grant
    Open grant
  • 2013 - 2014
    Road Curtain Antenna (Researchers in Business grant with LicenSys Pty Ltd)
    LicenSys Pty Ltd
    Open grant
  • 2012 - 2014
    Portable Microwave Systems for Imaging and Monitoring of the Human Body
    ARC Discovery Projects
    Open grant
  • 2010 - 2013
    Hybrid Imaging System for Breast Cancer Detection
    ARC Future Fellowships
    Open grant
  • 2010 - 2012
    Microwave System for Early Breast Cancer Detection Employing Ultra Wideband Conformal Array Antenna
    ARC Discovery Projects
    Open grant
  • 2009 - 2011
    Design of Planar Microwave Components and Sub-systems for Wideband Applications
    ARC Discovery Projects
    Open grant
  • 2007 - 2008
    Investigations into Multi-Antenna Wideband Systems for Future Wireless Communications
    UQ Early Career Researcher
    Open grant
  • 2007 - 2009
    Microwave Imaging System for Breast Cancer Detection Using Ultra Wideband Technology
    UQ Postdoctoral Research Fellowship
    Open grant

Availability

Professor Amin Abbosh is:
Available for supervision

Before you email them, read our advice on how to contact a supervisor.

Available projects

  • Multi-channel, multi-frequency measurements systems for medical electromagnetic imaging

    Advances in signal processing platforms and microwave signal capture have allowed for new architectures of sensors to be developed. Specifically, both the ability to capture higher bandwidth and higher dynamic range as well as the associated processing hardware being capable of more calculations per second.

    Harnessing these new capabilities requires a combination of hardware and software processing, and will enable the development of more and lower-cost medical electromagnetic imaging systems.

    A working knowledge of signal processing and electromagnetics is necessary

  • Wideband Medical Electromagnetic Sensors

    Medical Electromagnetic imaging techniques have the potential to be used in the diagnosis and monitoring of different diseases. To that end, electromagnetic sensors that operate efficiently at their near-field and within the frequency of interest should be properly designed to generate and receive utilized electromagnetic waves. This project will aim at designing compact EM sensors, using different techniques such as open-ended coaxial cables or waveguides, substrate-integrated waveguides, or any suitable near-field antenna. Those sensors should have wideband performance and thus the potential to be used as a portable medical probe or scanner.

    The successful candidate should have a strong background in (a) electromagnetic radiation, and (b) microwave engineering

  • Computationally efficient electromagnetic solver using AI

    With the fast progress in forming more complex electromagnetic (EM) structures with many design parameters and large demand for real-time solutions to complex EM problems in embedded devices, the need for a new EM-solving approach that can keep pace with the computational requirements has become more imminent. This project aims at developing a novel computationally efficient EM solver which is implementable on systems with limited resources using a physics-informed sparse deep neural network that solves partial differential forms of Maxwell’s equations without relying on other computational EM solver solutions. The successful candidate will specifically develop signal processing and machine learning algorithms for a real-time electromagnetic solver.

    The successful candidate should have a strong background in Artificial Intelligence & a working knowledge of electromagnetics and signal analysis

  • Reconfigurable Microwave Devices using Smart Materials

    This project aims at utilizing the electrodynamic properties of artificial materials in designing reconfigurable, or tunable, electromagnetic devices at the microwave frequency band, such as antennas, filters, couplers, etc. The reconfigurability might aim at controlling the center operating frequency, bandwidth, radiation pattern or direction, etc. The selected candidate will investigate the effect of different properties of those materials on the electromagnetic reconfigurability of microwave devices.

    The successful candidate should have a strong background in (a) electromagnetics and microwave engineering, and (b) measurement techniques of dielectric properties of materials

  • Electromagnetic Techniques for Brain Function Monitoring

    If you require a scholarship from me to do your PhD with my team, I will only support your application if you (1) have a high GPA and sound research record (published papers in decent journals, such as IEEE, IET etc), and (2) graduated from a good university. Please note that at UQ, we do not accept a research record of papers in unaccredited journals.

    If you are interested, please send me an email that includes: Your GPA, publication record (published and accepted papers in only ISI-accredited journals), patents, and awards (with documented proof of those). If you do not include all that information, we will not respond to your email.

  • Tunable microwave devices (filters, power dividers, couplers, etc)

    If you require a scholarship from me to do your PhD with my team, I will only support your application if you (1) have a high GPA and sound research record (published papers in decent journals, such as IEEE, IET etc), and (2) graduated from a good university. Please note that at UQ, we do not accept a research record of papers in unaccredited journals.

    If you are interested, please send me an email that includes: Your GPA, publication record (published and accepted papers in only ISI accredited journals), patents and awards (with documented proof of those). If you do not include all that information, we will not respond to your email.

  • Microwave Microscopy for Medical Applications

    If you require a scholarship from me to do your PhD with my team, I will only support your application if you (1) have a high GPA and sound research record (published papers in decent journals, such as IEEE, IET etc), and (2) graduated from a good university. Please note that at UQ, we do not accept a research record of papers in unaccredited journals.

    If you are interested, please send me an email that includes: Your GPA, publication record (published and accepted papers in only ISI accredited journals), patents and awards (with documented proof of those). If you do not include all that information, we will not respond to your email.

  • Reconfigurable Antennas

    If you require a scholarship from me to do your PhD with my team, I will only support your application if you (1) have a high GPA and sound research record (published papers in decent journals, such as IEEE, IET etc), and (2) graduated from a good university. Please note that at UQ, we do not accept a research record of papers in unaccredited journals.

    If you are interested, please send me an email that includes: Your GPA, publication record (published and accepted papers in only ISI accredited journals), patents and awards (with documented proof of those). If you do not include all that information, we will not respond to your email.

  • Millimeter-Wave Techniques for Skin Cancer Detection

    If you require a scholarship from me to do your PhD with my team, I will only support your application if you (1) have a high GPA and sound research record (published papers in decent journals, such as IEEE, IET etc), and (2) graduated from a good university. Please note that at UQ, we do not accept a research record of papers in unaccredited journals.

    If you are interested, please send me an email that includes: Your GPA, publication record (published and accepted papers in only ISI accredited journals), patents and awards (with documented proof of those). If you do not include all that information, we will not respond to your email.

  • Contactless Head Monitor for Newborn Babies

    If you require a scholarship from me to do your PhD with my team, I will only support your application if you (1) have a high GPA and sound research record (published papers in decent journals, such as IEEE, IET etc), and (2) graduated from a good university. Please note that at UQ, we do not accept a research record of papers in unaccredited journals.

    If you are interested, please send me an email that includes: Your GPA, publication record (published and accepted papers in only ISI accredited journals), patents and awards (with documented proof of those). If you do not include all that information, we will not respond to your email.

  • Antenna beamforming for 5G/6G mobile communication

    If you require a scholarship from me to do your PhD with my team, I will only support your application if you (1) have a high GPA and sound research record (published papers in decent journals, such as IEEE, IET etc), and (2) graduated from a good university. Please note that at UQ, we do not accept a research record of papers in unaccredited journals.

    If you are interested, please send me an email that includes: Your GPA, publication record (published and accepted papers in only ISI accredited journals), patents and awards (with documented proof of those). If you do not include all that information, we will not respond to your email.

  • Multi-channel, multi-frequency measurements systems for medical electromagnetic imaging

    Advances in signal processing platforms and microwave signal capture have allowed for new architectures of sensors to be developed. Specifically, both the ability to capture higher bandwidth and higher dynamic range as well as the associated processing hardware being capable of more calculations per second.

    Harnessing these new capabilities requires a combination of hardware and software processing, and will enable the development of more and lower-cost medical electromagnetic imaging systems.

    A working knowledge of signal processing and electromagnetics is necessary

  • Wideband Medical Electromagnetic Sensors

    Medical Electromagnetic imaging techniques have the potential to be used in the diagnosis and monitoring of different diseases. To that end, electromagnetic sensors that operate efficiently at their near-field and within the frequency of interest should be properly designed to generate and receive utilized electromagnetic waves. This project will aim at designing compact EM sensors, using different techniques such as open-ended coaxial cables or waveguides, substrate-integrated waveguides, or any suitable near-field antenna. Those sensors should have wideband performance and thus the potential to be used as a portable medical probe or scanner.

    The successful candidate should have a strong background in (a) electromagnetic radiation, and (b) microwave engineering

  • Computationally efficient electromagnetic solver using AI

    With the fast progress in forming more complex electromagnetic (EM) structures with many design parameters and large demand for real-time solutions to complex EM problems in embedded devices, the need for a new EM-solving approach that can keep pace with the computational requirements has become more imminent. This project aims at developing a novel computationally efficient EM solver which is implementable on systems with limited resources using a physics-informed sparse deep neural network that solves partial differential forms of Maxwell’s equations without relying on other computational EM solver solutions. The successful candidate will specifically develop signal processing and machine learning algorithms for a real-time electromagnetic solver.

    The successful candidate should have a strong background in Artificial Intelligence & a working knowledge of electromagnetics and signal analysis

  • Reconfigurable Microwave Devices using Smart Materials

    This project aims at utilizing the electrodynamic properties of artificial materials in designing reconfigurable, or tunable, electromagnetic devices at the microwave frequency band, such as antennas, filters, couplers, etc. The reconfigurability might aim at controlling the center operating frequency, bandwidth, radiation pattern or direction, etc. The selected candidate will investigate the effect of different properties of those materials on the electromagnetic reconfigurability of microwave devices.

    The successful candidate should have a strong background in (a) electromagnetics and microwave engineering, and (b) measurement techniques of dielectric properties of materials

  • Millimeter-Wave Techniques for Skin Cancer Detection

    If you require a scholarship from me to do your PhD with my team, I will only support your application if you (1) have a high GPA and sound research record (published papers in decent journals, such as IEEE, IET etc), and (2) graduated from a good university. Please note that at UQ, we do not accept a research record of papers in unaccredited journals.

    If you are interested, please send me an email that includes: Your GPA, publication record (published and accepted papers in only ISI accredited journals), patents and awards (with documented proof of those). If you do not include all that information, we will not respond to your email.

  • Electromagnetic Techniques for Brain Function Monitoring

    If you require a scholarship from me to do your PhD with my team, I will only support your application if you (1) have a high GPA and sound research record (published papers in decent journals, such as IEEE, IET etc), and (2) graduated from a good university. Please note that at UQ, we do not accept a research record of papers in unaccredited journals.

    If you are interested, please send me an email that includes: Your GPA, publication record (published and accepted papers in only ISI-accredited journals), patents, and awards (with documented proof of those). If you do not include all that information, we will not respond to your email.

  • Tunable microwave devices (filters, power dividers, couplers, etc)

    If you require a scholarship from me to do your PhD with my team, I will only support your application if you (1) have a high GPA and sound research record (published papers in decent journals, such as IEEE, IET etc), and (2) graduated from a good university. Please note that at UQ, we do not accept a research record of papers in unaccredited journals.

    If you are interested, please send me an email that includes: Your GPA, publication record (published and accepted papers in only ISI accredited journals), patents and awards (with documented proof of those). If you do not include all that information, we will not respond to your email.

  • Microwave Microscopy for Medical Applications

    If you require a scholarship from me to do your PhD with my team, I will only support your application if you (1) have a high GPA and sound research record (published papers in decent journals, such as IEEE, IET etc), and (2) graduated from a good university. Please note that at UQ, we do not accept a research record of papers in unaccredited journals.

    If you are interested, please send me an email that includes: Your GPA, publication record (published and accepted papers in only ISI accredited journals), patents and awards (with documented proof of those). If you do not include all that information, we will not respond to your email.

  • Reconfigurable Antennas

    If you require a scholarship from me to do your PhD with my team, I will only support your application if you (1) have a high GPA and sound research record (published papers in decent journals, such as IEEE, IET etc), and (2) graduated from a good university. Please note that at UQ, we do not accept a research record of papers in unaccredited journals.

    If you are interested, please send me an email that includes: Your GPA, publication record (published and accepted papers in only ISI accredited journals), patents and awards (with documented proof of those). If you do not include all that information, we will not respond to your email.

  • Contactless Head Monitor for Newborn Babies

    If you require a scholarship from me to do your PhD with my team, I will only support your application if you (1) have a high GPA and sound research record (published papers in decent journals, such as IEEE, IET etc), and (2) graduated from a good university. Please note that at UQ, we do not accept a research record of papers in unaccredited journals.

    If you are interested, please send me an email that includes: Your GPA, publication record (published and accepted papers in only ISI accredited journals), patents and awards (with documented proof of those). If you do not include all that information, we will not respond to your email.

  • Antenna beamforming for 5G/6G mobile communication

    If you require a scholarship from me to do your PhD with my team, I will only support your application if you (1) have a high GPA and sound research record (published papers in decent journals, such as IEEE, IET etc), and (2) graduated from a good university. Please note that at UQ, we do not accept a research record of papers in unaccredited journals.

    If you are interested, please send me an email that includes: Your GPA, publication record (published and accepted papers in only ISI accredited journals), patents and awards (with documented proof of those). If you do not include all that information, we will not respond to your email.

  • Electromagnetic Solver Using Physics - Guided Deep Neural Network

    This project aims to develop a physics-guided, data-driven method for solving complex electromagnetic problems efficiently. The focus of this project will be on medical microwave imaging.

Supervision history

Current supervision

Completed supervision

Enquiries

Contact Professor Amin Abbosh directly for media enquiries about:

  • Antennas
  • Microwave Medical Imaging
  • Microwave Passive Devices
  • Telecommunications

Need help?

For help with finding experts, story ideas and media enquiries, contact our Media team:

communications@uq.edu.au